On OMAP4, reading DSI_PLL_CONFIGURATION2 register requires the L3 clock
(CIO_CLK_ICG) to PLL. Currently dsi_dump_clocks() tries to read that
register without enabling the L3 clock, leading to crash if DSI is not
in use.
The status of the bit being read from DSI_PLL_CONFIGURATION2 is
available from dsi_clock_info->use_sys_clk, so we can avoid the whole
problem by just using that.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/omap2/dss/dsi.c | 6 +-----
1 files changed, 1 insertions(+), 5 deletions(-)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 8604153..1464ac4 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1491,7 +1491,6 @@ void dsi_pll_uninit(void)
void dsi_dump_clocks(struct seq_file *s)
{
- int clksel;
struct dsi_clock_info *cinfo = &dsi.current_cinfo;
enum dss_clk_source dispc_clk_src, dsi_clk_src;
@@ -1500,13 +1499,10 @@ void dsi_dump_clocks(struct seq_file *s)
enable_clocks(1);
- clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11);
-
seq_printf(s, "- DSI PLL -\n");
seq_printf(s, "dsi pll source = %s\n",
- clksel == 0 ?
- "dss_sys_clk" : "pclkfree");
+ cinfo->use_sys_clk ? "dss_sys_clk" : "pclkfree");
seq_printf(s, "Fint\t\t%-16luregn %u\n", cinfo->fint, cinfo->regn);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
