On Wed, Feb 16, 2011 at 10:56:38AM +0100, Sascha Hauer wrote:
> changes since v1:
> - Add a LCDC_ prefix to the register names.
> - use set/clear registers where appropriate
> - protect call to mxsfb_disable_controller() in mxsfb_remove()
> with a (host->enabled) as suggested by Lothar Wassmann
>
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Cc: Paul Mundt <lethal@xxxxxxxxxxxx>
> Cc: linux-fbdev@xxxxxxxxxxxxxxx
> Cc: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
> ---
> arch/arm/mach-mxs/include/mach/fb.h | 48 ++
> drivers/video/Kconfig | 9 +
> drivers/video/Makefile | 1 +
> drivers/video/mxsfb.c | 910 +++++++++++++++++++++++++++++++++++
> 4 files changed, 968 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-mxs/include/mach/fb.h
> create mode 100644 drivers/video/mxsfb.c
>
> diff --git a/arch/arm/mach-mxs/include/mach/fb.h b/arch/arm/mach-mxs/include/mach/fb.h
> new file mode 100644
> index 0000000..923f397
> --- /dev/null
> +++ b/arch/arm/mach-mxs/include/mach/fb.h
> @@ -0,0 +1,48 @@
> +/*
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#ifndef __MACH_FB_H
> +#define __MACH_FB_H
> +
> +#include <linux/fb.h>
> +
> +#define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */
> +#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
> +#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
> +#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
> +
> +#define FB_SYNC_DATA_ENABLE_HIGH_ACT 64
> +
> +struct mxsfb_platform_data {
> + struct fb_videomode *mode_list;
> + unsigned mode_count;
> +
> + unsigned default_bpp;
> +
> + unsigned dotclk_delay; /* refer manual HW_LCDIF_VDCTRL4 register */
> + unsigned ld_intf_width; /* refer STMLCDIF_* macros */
> +
> + unsigned fb_size; /* Size of the video memory. If zero a
> + * default will be used
> + */
> + unsigned long fb_phys; /* physical address for the video memory. If
> + * zero the framebuffer memory will be dynamically
> + * allocated. If specified,fb_size must also be specified.
> + * fb_phys must be unused by Linux.
> + */
> +};
> +
> +#endif /* __MACH_FB_H */
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 6bafb51b..e0ea23f 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -2365,6 +2365,15 @@ config FB_JZ4740
> help
> Framebuffer support for the JZ4740 SoC.
>
> +config FB_MXS
> + tristate "MXS LCD framebuffer support"
> + depends on FB && ARCH_MXS
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + help
> + Framebuffer support for the MXS SoC.
> +
> source "drivers/video/omap/Kconfig"
> source "drivers/video/omap2/Kconfig"
>
> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
> index 8c8fabd..9a096ae 100644
> --- a/drivers/video/Makefile
> +++ b/drivers/video/Makefile
> @@ -153,6 +153,7 @@ obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
> obj-$(CONFIG_FB_BFIN_7393) += bfin_adv7393fb.o
> obj-$(CONFIG_FB_MX3) += mx3fb.o
> obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
> +obj-$(CONFIG_FB_MXS) += mxsfb.o
>
> # the test framebuffer is last
> obj-$(CONFIG_FB_VIRTUAL) += vfb.o
> diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
> new file mode 100644
> index 0000000..ac9939b
> --- /dev/null
> +++ b/drivers/video/mxsfb.c
> @@ -0,0 +1,910 @@
> +/*
> + * Copyright (C) 2010 Juergen Beisert, Pengutronix
> + *
> + * This code is based on:
> + * Author: Vitaly Wool <vital@xxxxxxxxxxxxxxxxx>
> + *
> + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
> + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#define DRIVER_NAME "mxsfb"
> +
> +/**
> + * @file
> + * @brief LCDIF driver for i.MX23 and i.MX28
> + *
> + * The LCDIF support four modes of operation
> + * - MPU interface (to drive smart displays) -> not supported yet
> + * - VSYNC interface (like MPU interface plus Vsync) -> not supported yet
> + * - Dotclock interface (to drive LC displays with RGB data and sync signals)
> + * - DVI (to drive ITU-R BT656) -> not supported yet
> + *
> + * This driver depends on a correct setup of the pins used for this purpose
> + * (platform specific).
> + *
> + * For the developer: Don't forget to set the data bus width to the display
> + * in the imx_fb_videomode structure. You will else end up with ugly colours.
> + * If you fight against jitter you can vary the clock delay. This is a feature
> + * of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give
> + * the required value in the imx_fb_videomode structure.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/io.h>
> +#include <mach/fb.h>
> +#include <mach/hardware.h>
> +#include <mach/mxs.h>
> +
> +#define REG_SET 4
> +#define REG_CLR 8
> +
We already have these defined in mxs.h
--
Regards,
Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
