Hi!
I hope the fbdev list is still in use. I have just been experimenting
with using my old S3ViRGE PCI card in my Sun Blade 2000 as its primary
display adapter has no X11 driver available for it.
I put the card into my SPARC and booted up, after compiling in the s3fb
driver into the kernel.
On boot-up, it uses the e3d framebuffer driver, and detects the s3fb
card but ignores it as seen in dmesg:
s3fb 0000:00:03.0: ignoring secondary device
I then pulled out the primary graphic card (XVR-500) and rebooted. I got
the following lines in dmesg:
vgaarb: device added: PCI:0000:00:03.0,decodes=io
+mem,owns=mem,locks=none
vgaarb: loaded
s3fb 0000:00:03.0: ignoring secondary device
It seems a bit odd that it is still ignoring the S3ViRGE card given that
it is now the only graphic adapter in the system.
I then commented out the following code in drivers/video/s3fb.c:
if (! svga_primary_device(dev)) {
dev_info(&(dev->dev), "ignoring secondary device\n");
return -ENODEV;
}
and rebooted.
It got as far as the switching to console device before it hung.
I'm aware the s3fb driver has big endian issues, I can help fix those
issues so I can get the card working. Or in other words, I'd welcome
advice on how to proceed with this.
Thanks!
--
Tactical Nuclear Kittens
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
