Hello, I tested savagefb on 3 different Savage 4 cards: Diamond Stealth III S520 Number Nine SR9 Datapath Horizon 2S (two savage chips on a PCI card) it worked except the DDC which did not work on any of them. Looking at the BIOS code, it does not use MMIO register 0xff20 but CRT register 0xa0 or 0xb1 - depending on the chip revision and something in register 0xa6. With this patch, DDC works fine on all 3 cards (even on the second head of Horizon 2S - although it does not display anything as it's misconfigured because of missing BIOS). Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx> --- linux-2.6.35-rc2/drivers/video/savage/savagefb-i2c.c 2010-06-06 05:43:24.000000000 +0200 +++ linux-2.6.35-rc3/drivers/video/savage/savagefb-i2c.c 2010-08-28 23:54:10.000000000 +0200 @@ -181,6 +181,15 @@ par->chan.algo.getscl = prosavage_gpio_getscl; break; case FB_ACCEL_SAVAGE4: + par->chan.reg = CR_SERIAL1; + if (par->pcidev->revision > 1 && !(VGArCR(0xa6, par) & 0x40)) + par->chan.reg = CR_SERIAL2; + par->chan.ioaddr = par->mmio.vbase; + par->chan.algo.setsda = prosavage_gpio_setsda; + par->chan.algo.setscl = prosavage_gpio_setscl; + par->chan.algo.getsda = prosavage_gpio_getsda; + par->chan.algo.getscl = prosavage_gpio_getscl; + break; case FB_ACCEL_SAVAGE2000: par->chan.reg = 0xff20; par->chan.ioaddr = par->mmio.vbase; -- Ondrej Zary -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
