Moving to the dri-devel list as you're using KMS. On Don, 2010-06-10 at 16:01 +0200, Lars Doelle wrote: > Hi Benjamin, > Hi All, > > > i write to report a regression that happened after 2.6.34-rc3 and before > or including 2.6.34-rc4 and still persists on 2.6.35-rc2. > > The effect is, that after DPMS-OFF, the monitor cannot be reactivated > locally by a key press or remotely via `xset dpms force on´. > > I can work around the issue switching the monitor off and on again. > > For the technical details of the local environment see below. > I can provide more information on request and offer help testing patches. > > > > Kind regards > > Lars > > > -------------------------------- > > > - config.gz attached, below some lines. > > CONFIG_X86_64=y > > CONFIG_DRM=y > CONFIG_DRM_KMS_HELPER=y > CONFIG_DRM_TTM=y > CONFIG_DRM_RADEON=y > CONFIG_DRM_RADEON_KMS=y > CONFIG_VIDEO_OUTPUT_CONTROL=y > > > - X11: find attached the Xorg.0.log for full information > > X.Org X Server 1.7.7 > Release Date: 2010-05-04 > [..] > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "DELL 2408WFP" > (**) | |-->Device "ATI FireMV 2260" > [..] > (II) RADEON(0): Output DisplayPort-0 using monitor section DELL 2408WFP > [..] > (**) RADEON(0): DPMS enabled > > > - Notes from the kernel.log > > following messages occur only >= 2.6.34-rc4. I think they are issued > when i `xset dpms force off´ or dpms is used automatically. > > ... > > : [drm:dp_link_train] *ERROR* clock recovery tried 5 times > : [drm:dp_link_train] *ERROR* clock recovery failed > : [drm:dp_link_train] *ERROR* channel eq failed: 5 tries > : [drm:dp_link_train] *ERROR* channel eq failed > > ... > > The following messages might be unrelated to the problem and occur > on 2.6.34-rc3 too, when i switch the monitor off/on. > > : [drm:atom_dp_get_link_status] *ERROR* displayport link status failed > : [drm:atom_dp_get_link_status] *ERROR* displayport link status failed > : [drm:atom_dp_get_link_status] *ERROR* displayport link status failed > > Below stuff from the initiation ... > > ... > > : [drm] Initialized drm 1.1.0 20060810 > : [drm] radeon defaulting to kernel modesetting. > : [drm] radeon kernel modesetting enabled. > : radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > : radeon 0000:01:00.0: setting latency timer to 64 > : [drm] radeon: Initializing kernel modesetting. > : [drm] register mmio base: 0x90200000 > : [drm] register mmio size: 65536 > : ATOM BIOS: 113 > : [drm] Clocks initialized ! > : [drm] Internal thermal controller with fan control > : [drm] 3 Power State(s) > : [drm] State 0 Default (default) > : [drm] 16 PCIE Lanes > : [drm] 3 Clock Mode(s) > : [drm] 0 engine/memory: 500000/500000 > : [drm] 1 engine/memory: 500000/500000 > : [drm] 2 engine/memory: 500000/500000 > : [drm] State 1 Performance > : [drm] 16 PCIE Lanes > : [drm] 3 Clock Mode(s) > : [drm] 0 engine/memory: 110000/252000 > : [drm] 1 engine/memory: 300000/396000 > : [drm] 2 engine/memory: 500000/500000 > : [drm] State 2 Performance > : [drm] 16 PCIE Lanes > : [drm] 3 Clock Mode(s) > : [drm] 0 engine/memory: 450000/500000 > : [drm] 1 engine/memory: 450000/500000 > : [drm] 2 engine/memory: 500000/500000 > : [drm] radeon: power management initialized > : radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used) > : radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF > : [drm] Detected VRAM RAM=256M, BAR=256M > : [drm] RAM width 64bits DDR > : Available graphics memory: 1017548 kiB. > : [drm] radeon: 256M of VRAM memory ready > : [drm] radeon: 512M of GTT memory ready. > : radeon 0000:01:00.0: irq 30 for MSI/MSI-X > : [drm] radeon: using MSI. > : [drm] radeon: irq initialized. > : [drm] GART: num cpu pages 131072, num gpu pages 131072 > : [drm] Loading RV620 Microcode > : platform radeon_cp.0: firmware: using built-in firmware radeon/RV620_pfp.bin > : platform radeon_cp.0: firmware: using built-in firmware radeon/RV620_me.bin > : platform radeon_cp.0: firmware: using built-in firmware radeon/R600_rlc.bin > : [drm] ring test succeeded in 1 usecs > : [drm] radeon: ib pool ready. > : [drm] ib test succeeded in 0 usecs > : [drm] Enabling audio support > : [drm] Radeon Display Connectors > : [drm] Connector 0: > : [drm] DisplayPort > : [drm] HPD2 > : [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c > : [drm] Encoders: > : [drm] DFP1: INTERNAL_UNIPHY > : [drm] Connector 1: > : [drm] DisplayPort > : [drm] HPD4 > : [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c > : [drm] Encoders: > : [drm] DFP2: INTERNAL_UNIPHY > : [drm] fb mappable at 0x80141000 > : [drm] vram apper at 0x80000000 > : [drm] size 9216000 > : [drm] fb depth is 24 > : [drm] pitch is 7680 > : Console: switching to colour frame buffer device 240x75 > : fb0: radeondrmfb frame buffer device > : registered panic notifier > : [drm] Initialized radeon 2.2.0 20080528 for 0000:01:00.0 on minor 0 -- Earthling Michel Dänzer | http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
