> -----Original Message----- > From: Kan-Ru Chen [mailto:kanru@xxxxxxxxx] > Sent: Friday, April 16, 2010 1:42 PM > To: Tomi Valkeinen > Cc: Kan-Ru Chen; linux-omap@xxxxxxxxxxxxxxx; Hiremath, Vaibhav; linux- > fbdev@xxxxxxxxxxxxxxx; Thomas Weber > Subject: [RFC] [PATCH] Devkit8000: Use generic panel driver instead of new > driver for every panel > > Instead of use special driver for every new panel, we can use the > generic driver and modedb database to specify the timing > information. Now supports 4.3, 5.6 and 7 inch panel. [Hiremath, Vaibhav] Yes we are using modedb with generic panel, infact with our all internal releases we are supporting 480P and 720P DVI output using generic driver. > > Signed-off-by: Kan-Ru Chen <kanru@xxxxxxxxx> > --- > > Hi! > > Some time ago there was a discussion about implementing a common > driver for dummy LCDs. I tried the generic-panel and found it can > cover most panels, by adding new entries to modedb. > > I've discussed with Thomas and he think this approach might be > cleaner. I'd like to know others opinions. > > arch/arm/mach-omap2/board-devkit8000.c | 3 ++- > drivers/video/modedb.c | 12 ++++++++++++ > drivers/video/omap2/displays/panel-generic.c | 3 ++- > 3 files changed, 16 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach- > omap2/board-devkit8000.c > index 5bfc13b..4f52dfd 100644 > --- a/arch/arm/mach-omap2/board-devkit8000.c > +++ b/arch/arm/mach-omap2/board-devkit8000.c > @@ -172,8 +172,9 @@ static struct regulator_consumer_supply > devkit8000_vsim_supply = { > > static struct omap_dss_device devkit8000_lcd_device = { > .name = "lcd", > - .driver_name = "innolux_at_panel", > + .driver_name = "generic_panel", > .type = OMAP_DISPLAY_TYPE_DPI, > + .panel.config = > OMAP_DSS_LCD_TFT|OMAP_DSS_LCD_IVS|OMAP_DSS_LCD_IHS, > .phy.dpi.data_lines = 24, > .platform_enable = devkit8000_panel_enable_lcd, > .platform_disable = devkit8000_panel_disable_lcd, > diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c > index b895aae..89bb3e5 100644 > --- a/drivers/video/modedb.c > +++ b/drivers/video/modedb.c > @@ -273,6 +273,18 @@ static const struct fb_videomode modedb[] = { > /* 800x520i @ 50 Hz, 15.625 kHz hsync (PAL RGB) */ > NULL, 50, 800, 520, 58823, 144, 64, 72, 28, 80, 5, > 0, FB_VMODE_INTERLACED > + }, { > + /* 480x272 @ 60 Hz, Devkit8000 4.3 inch LCD */ > + NULL, 60, 480, 272, 111000, 2, 2, 2, 2, 41, 10, > + 0, FB_VMODE_NONINTERLACED > + }, { > + /* 640x480 @ 60 Hz, Devkit8000 5.6 inch LCD */ > + NULL, 60, 640, 480, 39682, 16, 143, 32, 12, 1, 1, > + 0, FB_VMODE_NONINTERLACED > + }, { > + /* 800x480 @ 60 Hz, Devkit8000 7 inch LCD */ > + NULL, 60, 800, 480, 24855, 210, 45, 132, 22, 1, 1, > + 0, FB_VMODE_NONINTERLACED > }, [Hiremath, Vaibhav] I would suggest not to specify board name here instead you can specify LCD name here. Thanks, Vaibhav > }; > > diff --git a/drivers/video/omap2/displays/panel-generic.c > b/drivers/video/omap2/displays/panel-generic.c > index 300eff5..b0a5599 100644 > --- a/drivers/video/omap2/displays/panel-generic.c > +++ b/drivers/video/omap2/displays/panel-generic.c > @@ -66,7 +66,8 @@ static void generic_panel_power_off(struct omap_dss_device > *dssdev) > > static int generic_panel_probe(struct omap_dss_device *dssdev) > { > - dssdev->panel.config = OMAP_DSS_LCD_TFT; > + if (dssdev->panel.config == 0) > + dssdev->panel.config = OMAP_DSS_LCD_TFT; > dssdev->panel.timings = generic_panel_timings; > > return 0; > -- > 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
