On Tue, Feb 2, 2010 at 6:09 AM, Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> wrote: > On Mon, 1 Feb 2010 18:35:08 +0800 > Jaya Kumar <jayakumar.lkml@xxxxxxxxx> wrote: > >> This patch adds the ability to store waveforms to broadsheetfb. It uses the >> firmware class to retrieve the waveform. The request to store the waveform >> is triggered from a driver sysfs entry called loadstore_waveform. I >> considered adding this to Documentation/ABI/testing/ but then decided against >> it. It is not something I would expect a user to ever interact with. It >> would be only useful for people doing platform bringup and other such dirty >> activities. Also, I noticed it is not (yet?) common practice to document >> sysfs entries for fbdev drivers in there. Please let me know your feedback. >> >> Thanks, >> jaya >> >> This patch adds waveform storing capability to broadsheetfb. It uses the >> firmware class to retrieve the waveform, and the request to initiate the >> waveform storing is done via a driver sysfs entry, loadstore_waveform. > > Please educate me: broadsheet is a framebuffer device, is it not? What > does it mean to record a waveform into a framebuffer device? In what > way will a user observe the waveform? Is it audio? From the patch it > appears that this mysterious device has flash memory too? > > Mystified! > Hi Andrew, You are right, broadsheet is a framebuffer device. It is slightly different than a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. Thanks, jaya -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
