hello, Mr. Andrew Morton
This patch is for nuc900 platform.
Please check and ack.
Thank you very much.
best regards
Wang Qiang
2010/1/11 Wang Qiang <rurality.linux@xxxxxxxxx>:
> hi, Dear Wan
>
> There is the patch of LCD controller driver for nuc900s.
> The Linux LOGO is just fine and the FB-Test application was ok, too.
>
> best regards
> wangqiang
>
> Signed-off-by: Wang Qiang <rurality.linux@xxxxxxxxx>
> Cc:Wang Zongshun <mcuos.com@xxxxxxxxx>
> ---
> diff --git a/arch/arm/configs/nuc950_defconfig
> b/arch/arm/configs/nuc950_defconfig
> index 97300ec..51cc2a2 100644
> --- a/arch/arm/configs/nuc950_defconfig
> +++ b/arch/arm/configs/nuc950_defconfig
> @@ -590,8 +590,40 @@ CONFIG_SSB_POSSIBLE=y
> #
> # CONFIG_VGASTATE is not set
> # CONFIG_VIDEO_OUTPUT_CONTROL is not set
> -# CONFIG_FB is not set
> # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
> +CONFIG_FB=y
> +# CONFIG_FIRMWARE_EDID is not set
> +# CONFIG_FB_DDC is not set
> +# CONFIG_FB_BOOT_VESA_SUPPORT is not set
> +CONFIG_FB_CFB_FILLRECT=y
> +CONFIG_FB_CFB_COPYAREA=y
> +CONFIG_FB_CFB_IMAGEBLIT=y
> +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> +# CONFIG_FB_SYS_FILLRECT is not set
> +# CONFIG_FB_SYS_COPYAREA is not set
> +# CONFIG_FB_SYS_IMAGEBLIT is not set
> +# CONFIG_FB_FOREIGN_ENDIAN is not set
> +# CONFIG_FB_SYS_FOPS is not set
> +# CONFIG_FB_SVGALIB is not set
> +# CONFIG_FB_MACMODES is not set
> +# CONFIG_FB_BACKLIGHT is not set
> +# CONFIG_FB_MODE_HELPERS is not set
> +# CONFIG_FB_TILEBLITTING is not set
> +
> +#
> +# Frame buffer hardware drivers
> +#
> +# CONFIG_FB_S1D13XXX is not set
> +CONFIG_FB_NUC900=y
> +CONFIG_GPM1040A0_320X240=y
> +CONFIG_FB_NUC900_DEBUG=y
> +# CONFIG_FB_VIRTUAL is not set
> +# CONFIG_FB_METRONOME is not set
> +# CONFIG_FB_MB862XX is not set
> +# CONFIG_FB_BROADSHEET is not set
> +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
> +
> +
>
> #
> # Display device support
> @@ -603,6 +635,25 @@ CONFIG_SSB_POSSIBLE=y
> #
> # CONFIG_VGA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> +CONFIG_FONTS=y
> +# CONFIG_FONT_8x8 is not set
> +CONFIG_FONT_8x16=y
> +# CONFIG_FONT_6x11 is not set
> +# CONFIG_FONT_7x14 is not set
> +# CONFIG_FONT_PEARL_8x8 is not set
> +# CONFIG_FONT_ACORN_8x8 is not set
> +# CONFIG_FONT_MINI_4x6 is not set
> +# CONFIG_FONT_SUN8x16 is not set
> +# CONFIG_FONT_SUN12x22 is not set
> +# CONFIG_FONT_10x18 is not set
> +CONFIG_LOGO=y
> +# CONFIG_LOGO_LINUX_MONO is not set
> +# CONFIG_LOGO_LINUX_VGA16 is not set
> +CONFIG_LOGO_LINUX_CLUT224=y
> +
> # CONFIG_SOUND is not set
> # CONFIG_HID_SUPPORT is not set
> CONFIG_USB_SUPPORT=y
> diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
> index 4d58ba1..f8730b6 100644
> --- a/arch/arm/mach-w90x900/cpu.h
> +++ b/arch/arm/mach-w90x900/cpu.h
> @@ -57,3 +57,4 @@ extern struct platform_device nuc900_device_fmi;
> extern struct platform_device nuc900_device_kpi;
> extern struct platform_device nuc900_device_rtc;
> extern struct platform_device nuc900_device_ts;
> +extern struct platform_device nuc900_device_lcd;
> diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
> index ec711f4..298c7a2 100644
> --- a/arch/arm/mach-w90x900/dev.c
> +++ b/arch/arm/mach-w90x900/dev.c
> @@ -34,6 +34,7 @@
> #include <mach/regs-serial.h>
> #include <mach/nuc900_spi.h>
> #include <mach/map.h>
> +#include <mach/fb.h>
>
> #include "cpu.h"
>
> @@ -380,6 +381,48 @@ struct platform_device nuc900_device_kpi = {
> .resource = nuc900_kpi_resource,
> };
>
> +#ifdef CONFIG_FB_NUC900
> +
> +static struct resource nuc900_lcd_resource[] = {
> + [0] = {
> + .start = W90X900_PA_LCD,
> + .end = W90X900_PA_LCD + W90X900_SZ_LCD - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = IRQ_LCD,
> + .end = IRQ_LCD,
> + .flags = IORESOURCE_IRQ,
> + }
> +};
> +
> +static u64 nuc900_device_lcd_dmamask = 0xffffffffUL;
> +
> +struct platform_device nuc900_device_lcd = {
> + .name = "nuc900-lcd",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(nuc900_lcd_resource),
> + .resource = nuc900_lcd_resource,
> + .dev = {
> + .dma_mask = &nuc900_device_lcd_dmamask,
> + .coherent_dma_mask = 0xffffffffUL
> + }
> +};
> +
> +void nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd)
> +{
> + struct nuc900fb_mach_info *npd;
> +
> + npd = kmalloc(sizeof(*npd), GFP_KERNEL);
> + if (npd) {
> + memcpy(npd, pd, sizeof(*npd));
> + nuc900_device_lcd.dev.platform_data = npd;
> + } else {
> + printk(KERN_ERR "no memory for LCD platform data\n");
> + }
> +}
> +#endif
> +
> /*Here should be your evb resourse,such as LCD*/
>
> static struct platform_device *nuc900_public_dev[] __initdata = {
> diff --git a/arch/arm/mach-w90x900/include/mach/fb.h
> b/arch/arm/mach-w90x900/include/mach/fb.h
> new file mode 100644
> index 0000000..cec5ece
> --- /dev/null
> +++ b/arch/arm/mach-w90x900/include/mach/fb.h
> @@ -0,0 +1,83 @@
> +/* linux/include/asm/arch-nuc900/fb.h
> + *
> + * Copyright (c) 2008 Nuvoton technology corporation
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Changelog:
> + *
> + * 2008/08/26 vincen.zswan modify this file for LCD.
> + */
> +
> +#ifndef __ASM_ARM_FB_H
> +#define __ASM_ARM_FB_H
> +
> +
> +
> +/* LCD Controller Hardware Desc */
> +struct nuc900fb_hw {
> + unsigned int lcd_dccs;
> + unsigned int lcd_device_ctrl;
> + unsigned int lcd_mpulcd_cmd;
> + unsigned int lcd_int_cs;
> + unsigned int lcd_crtc_size;
> + unsigned int lcd_crtc_dend;
> + unsigned int lcd_crtc_hr;
> + unsigned int lcd_crtc_hsync;
> + unsigned int lcd_crtc_vr;
> + unsigned int lcd_va_baddr0;
> + unsigned int lcd_va_baddr1;
> + unsigned int lcd_va_fbctrl;
> + unsigned int lcd_va_scale;
> + unsigned int lcd_va_test;
> + unsigned int lcd_va_win;
> + unsigned int lcd_va_stuff;
> +};
> +
> +/* LCD Display Description */
> +struct nuc900fb_display {
> + /* LCD Image type */
> + unsigned type;
> +
> + /* LCD Screen Size */
> + unsigned short width;
> + unsigned short height;
> +
> + /* LCD Screen Info */
> + unsigned short xres;
> + unsigned short yres;
> + unsigned short bpp;
> +
> + unsigned long pixclock;
> + unsigned short left_margin;
> + unsigned short right_margin;
> + unsigned short hsync_len;
> + unsigned short upper_margin;
> + unsigned short lower_margin;
> + unsigned short vsync_len;
> +
> + /* hardware special register value */
> + unsigned int dccs;
> + unsigned int devctl;
> + unsigned int fbctrl;
> + unsigned int scale;
> +};
> +
> +struct nuc900fb_mach_info {
> + struct nuc900fb_display *displays;
> + unsigned num_displays;
> + unsigned default_display;
> + /* GPIO Setting Info */
> + unsigned gpio_dir;
> + unsigned gpio_dir_mask;
> + unsigned gpio_data;
> + unsigned gpio_data_mask;
> +};
> +
> +extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
> +
> +#endif /* __ASM_ARM_FB_H */
> diff --git a/arch/arm/mach-w90x900/include/mach/regs-ldm.h
> b/arch/arm/mach-w90x900/include/mach/regs-ldm.h
> new file mode 100644
> index 0000000..e9d480a
> --- /dev/null
> +++ b/arch/arm/mach-w90x900/include/mach/regs-ldm.h
> @@ -0,0 +1,253 @@
> +/*
> + * arch/arm/mach-w90x900/include/mach/regs-serial.h
> + *
> + * Copyright (c) 2009 Nuvoton technology corporation
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Description:
> + * Nuvoton Display, LCM Register list
> + * Author: Wang Qiang (rurality.linux@xxxxxxxxx) 2009/12/11
> + *
> + */
> +
> +
> +#ifndef __ASM_ARM_W90X900_REGS_LDM_H
> +#define __ASM_ARM_W90X900_REGS_LDM_H
> +
> +#include <mach/map.h>
> +
> +/* Display Controller Control/Status Register */
> +#define REG_LCM_DCCS (0x00)
> +
> +#define LCM_DCCS_ENG_RST (1 << 0)
> +#define LCM_DCCS_VA_EN (1 << 1)
> +#define LCM_DCCS_OSD_EN (1 << 2)
> +#define LCM_DCCS_DISP_OUT_EN (1 << 3)
> +#define LCM_DCCS_DISP_INT_EN (1 << 4)
> +#define LCM_DCCS_CMD_ON (1 << 5)
> +#define LCM_DCCS_FIELD_INTR (1 << 6)
> +#define LCM_DCCS_SINGLE (1 << 7)
> +
> +enum LCM_DCCS_VA_SRC {
> + LCM_DCCS_VA_SRC_YUV422 = (0 << 8),
> + LCM_DCCS_VA_SRC_YCBCR422 = (1 << 8),
> + LCM_DCCS_VA_SRC_RGB888 = (2 << 8),
> + LCM_DCCS_VA_SRC_RGB666 = (3 << 8),
> + LCM_DCCS_VA_SRC_RGB565 = (4 << 8),
> + LCM_DCCS_VA_SRC_RGB444LOW = (5 << 8),
> + LCM_DCCS_VA_SRC_RGB444HIGH = (7 << 8)
> +};
> +
> +
> +/* Display Device Control Register */
> +#define REG_LCM_DEV_CTRL (0x04)
> +
> +enum LCM_DEV_CTRL_SWAP_YCbCr {
> + LCM_DEV_CTRL_SWAP_UYVY = (0 << 1),
> + LCM_DEV_CTRL_SWAP_YUYV = (1 << 1),
> + LCM_DEV_CTRL_SWAP_VYUY = (2 << 1),
> + LCM_DEV_CTRL_SWAP_YVYU = (3 << 1)
> +};
> +
> +enum LCM_DEV_CTRL_RGB_SHIFT {
> + LCM_DEV_CTRL_RGB_SHIFT_NOT = (0 << 3),
> + LCM_DEV_CTRL_RGB_SHIFT_ONECYCLE = (1 << 3),
> + LCM_DEV_CTRL_RGB_SHIFT_TWOCYCLE = (2 << 3),
> + LCM_DEV_CTRL_RGB_SHIFT_NOT_DEF = (3 << 3)
> +};
> +
> +enum LCM_DEV_CTRL_DEVICE {
> + LCM_DEV_CTRL_DEVICE_YUV422 = (0 << 5),
> + LCM_DEV_CTRL_DEVICE_YUV444 = (1 << 5),
> + LCM_DEV_CTRL_DEVICE_UNIPAC = (4 << 5),
> + LCM_DEV_CTRL_DEVICE_SEIKO_EPSON = (5 << 5),
> + LCM_DEV_CTRL_DEVICE_HIGH_COLOR = (6 << 5),
> + LCM_DEV_CTRL_DEVICE_MPU = (7 << 5)
> +};
> +
> +#define LCM_DEV_CTRL_LCD_DDA (8)
> +#define LCM_DEV_CTRL_YUV2CCIR (16)
> +
> +enum LCM_DEV_CTRL_LCD_SEL {
> + LCM_DEV_CTRL_LCD_SEL_RGB_GBR = (0 << 17),
> + LCM_DEV_CTRL_LCD_SEL_BGR_RBG = (1 << 17),
> + LCM_DEV_CTRL_LCD_SEL_GBR_RGB = (2 << 17),
> + LCM_DEV_CTRL_LCD_SEL_RBG_BGR = (3 << 17)
> +};
> +
> +enum LCM_DEV_CTRL_FAL_D {
> + LCM_DEV_CTRL_FAL_D_FALLING = (0 << 19),
> + LCM_DEV_CTRL_FAL_D_RISING = (1 << 19),
> +};
> +
> +enum LCM_DEV_CTRL_H_POL {
> + LCM_DEV_CTRL_H_POL_LOW = (0 << 20),
> + LCM_DEV_CTRL_H_POL_HIGH = (1 << 20),
> +};
> +
> +enum LCM_DEV_CTRL_V_POL {
> + LCM_DEV_CTRL_V_POL_LOW = (0 << 21),
> + LCM_DEV_CTRL_V_POL_HIGH = (1 << 21),
> +};
> +
> +enum LCM_DEV_CTRL_VR_LACE {
> + LCM_DEV_CTRL_VR_LACE_NINTERLACE = (0 << 22),
> + LCM_DEV_CTRL_VR_LACE_INTERLACE = (1 << 22),
> +};
> +
> +enum LCM_DEV_CTRL_LACE {
> + LCM_DEV_CTRL_LACE_NINTERLACE = (0 << 23),
> + LCM_DEV_CTRL_LACE_INTERLACE = (1 << 23),
> +};
> +
> +enum LCM_DEV_CTRL_RGB_SCALE {
> + LCM_DEV_CTRL_RGB_SCALE_4096 = (0 << 24),
> + LCM_DEV_CTRL_RGB_SCALE_65536 = (1 << 24),
> + LCM_DEV_CTRL_RGB_SCALE_262144 = (2 << 24),
> + LCM_DEV_CTRL_RGB_SCALE_16777216 = (3 << 24),
> +};
> +
> +enum LCM_DEV_CTRL_DBWORD {
> + LCM_DEV_CTRL_DBWORD_HALFWORD = (0 << 26),
> + LCM_DEV_CTRL_DBWORD_FULLWORD = (1 << 26),
> +};
> +
> +enum LCM_DEV_CTRL_MPU68 {
> + LCM_DEV_CTRL_MPU68_80_SERIES = (0 << 27),
> + LCM_DEV_CTRL_MPU68_68_SERIES = (1 << 27),
> +};
> +
> +enum LCM_DEV_CTRL_DE_POL {
> + LCM_DEV_CTRL_DE_POL_HIGH = (0 << 28),
> + LCM_DEV_CTRL_DE_POL_LOW = (1 << 28),
> +};
> +
> +#define LCM_DEV_CTRL_CMD16 (29)
> +#define LCM_DEV_CTRL_CM16t18 (30)
> +#define LCM_DEV_CTRL_CMD_LOW (31)
> +
> +/* MPU-Interface LCD Write Command */
> +#define REG_LCM_MPU_CMD (0x08)
> +
> +/* Interrupt Control/Status Register */
> +#define REG_LCM_INT_CS (0x0c)
> +#define LCM_INT_CS_DISP_F_EN (1 << 0)
> +#define LCM_INT_CS_UNDERRUN_EN (1 << 1)
> +#define LCM_INT_CS_BUS_ERROR_INT (1 << 28)
> +#define LCM_INT_CS_UNDERRUN_INT (1 << 29)
> +#define LCM_INT_CS_DISP_F_STATUS (1 << 30)
> +#define LCM_INT_CS_DISP_F_INT (1 << 31)
> +
> +/* CRTC Display Size Control Register */
> +#define REG_LCM_CRTC_SIZE (0x10)
> +#define LCM_CRTC_SIZE_VTTVAL(x) ((x) << 16)
> +#define LCM_CRTC_SIZE_HTTVAL(x) ((x) << 0)
> +
> +/* CRTC Display Enable End */
> +#define REG_LCM_CRTC_DEND (0x14)
> +#define LCM_CRTC_DEND_VDENDVAL(x) ((x) << 16)
> +#define LCM_CRTC_DEND_HDENDVAL(x) ((x) << 0)
> +
> +/* CRTC Internal Horizontal Retrace Control Register */
> +#define REG_LCM_CRTC_HR (0x18)
> +#define LCM_CRTC_HR_EVAL(x) ((x) << 16)
> +#define LCM_CRTC_HR_SVAL(x) ((x) << 0)
> +
> +/* CRTC Horizontal Sync Control Register */
> +#define REG_LCM_CRTC_HSYNC (0x1C)
> +#define LCM_CRTC_HSYNC_SHIFTVAL(x) ((x) << 30)
> +#define LCM_CRTC_HSYNC_EVAL(x) ((x) << 16)
> +#define LCM_CRTC_HSYNC_SVAL(x) ((x) << 0)
> +
> +/* CRTC Internal Vertical Retrace Control Register */
> +#define REG_LCM_CRTC_VR (0x20)
> +#define LCM_CRTC_VR_EVAL(x) ((x) << 16)
> +#define LCM_CRTC_VR_SVAL(x) ((x) << 0)
> +
> +/* Video Stream Frame Buffer-0 Starting Address */
> +#define REG_LCM_VA_BADDR0 (0x24)
> +
> +/* Video Stream Frame Buffer-1 Starting Address */
> +#define REG_LCM_VA_BADDR1 (0x28)
> +
> +/* Video Stream Frame Buffer Control Register */
> +#define REG_LCM_VA_FBCTRL (0x2C)
> +#define LCM_VA_FBCTRL_IO_REGION_HALF (1 << 28)
> +#define LCM_VA_FBCTRL_FIELD_DUAL (1 << 29)
> +#define LCM_VA_FBCTRL_START_BUF (1 << 30)
> +#define LCM_VA_FBCTRL_DB_EN (1 << 31)
> +
> +/* Video Stream Scaling Control Register */
> +#define REG_LCM_VA_SCALE (0x30)
> +#define LCM_VA_SCALE_XCOPY_INTERPOLATION (0 << 15)
> +#define LCM_VA_SCALE_XCOPY_DUPLICATION (1 << 15)
> +
> +/* Image Stream Active Window Coordinates */
> +#define REG_LCM_VA_WIN (0x38)
> +
> +/* Image Stream Stuff Pixel */
> +#define REG_LCM_VA_STUFF (0x3C)
> +
> +/* OSD Window Starting Coordinates */
> +#define REG_LCM_OSD_WINS (0x40)
> +
> +/* OSD Window Ending Coordinates */
> +#define REG_LCM_OSD_WINE (0x44)
> +
> +/* OSD Stream Frame Buffer Starting Address */
> +#define REG_LCM_OSD_BADDR (0x48)
> +
> +/* OSD Stream Frame Buffer Control Register */
> +#define REG_LCM_OSD_FBCTRL (0x4c)
> +
> +/* OSD Overlay Control Register */
> +#define REG_LCM_OSD_OVERLAY (0x50)
> +
> +/* OSD Overlay Color-Key Pattern Register */
> +#define REG_LCM_OSD_CKEY (0x54)
> +
> +/* OSD Overlay Color-Key Mask Register */
> +#define REG_LCM_OSD_CMASK (0x58)
> +
> +/* OSD Window Skip1 Register */
> +#define REG_LCM_OSD_SKIP1 (0x5C)
> +
> +/* OSD Window Skip2 Register */
> +#define REG_LCM_OSD_SKIP2 (0x60)
> +
> +/* OSD horizontal up scaling control register */
> +#define REG_LCM_OSD_SCALE (0x64)
> +
> +/* MPU Vsync control register */
> +#define REG_LCM_MPU_VSYNC (0x68)
> +
> +/* Hardware cursor control Register */
> +#define REG_LCM_HC_CTRL (0x6C)
> +
> +/* Hardware cursot tip point potison on va picture */
> +#define REG_LCM_HC_POS (0x70)
> +
> +/* Hardware Cursor Window Buffer Control Register */
> +#define REG_LCM_HC_WBCTRL (0x74)
> +
> +/* Hardware cursor memory base address register */
> +#define REG_LCM_HC_BADDR (0x78)
> +
> +/* Hardware cursor color ram register mapped to bpp = 0 */
> +#define REG_LCM_HC_COLOR0 (0x7C)
> +
> +/* Hardware cursor color ram register mapped to bpp = 1 */
> +#define REG_LCM_HC_COLOR1 (0x80)
> +
> +/* Hardware cursor color ram register mapped to bpp = 2 */
> +#define REG_LCM_HC_COLOR2 (0x84)
> +
> +/* Hardware cursor color ram register mapped to bpp = 3 */
> +#define REG_LCM_HC_COLOR3 (0x88)
> +
> +#endif /* __ASM_ARM_W90X900_REGS_LDM_H */
> diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c
> b/arch/arm/mach-w90x900/mach-nuc950evb.c
> index cef903b..b3edc3c 100644
> --- a/arch/arm/mach-w90x900/mach-nuc950evb.c
> +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
> @@ -10,6 +10,8 @@
> * This program is free software; you can redistribute it and/or
> * modify it under the terms of the GNU General Public License as
> * published by the Free Software Foundation;version 2 of the License.
> + * history:
> + * Wang Qiang (rurality.linux@xxxxxxxxx) add LCD support
> *
> */
>
> @@ -18,9 +20,51 @@
> #include <asm/mach/map.h>
> #include <asm/mach-types.h>
> #include <mach/map.h>
> +#include <mach/regs-ldm.h>
> +#include <mach/fb.h>
>
> #include "nuc950.h"
>
> +#ifdef CONFIG_FB_NUC900
> +/* LCD Controller */
> +static struct nuc900fb_display __initdata nuc950_lcd_info[] = {
> + /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
> + [0] = {
> + .type = LCM_DCCS_VA_SRC_RGB565,
> + .width = 320,
> + .height = 240,
> + .xres = 320,
> + .yres = 240,
> + .bpp = 16,
> + .pixclock = 200000,
> + .left_margin = 34,
> + .right_margin = 54,
> + .hsync_len = 10,
> + .upper_margin = 18,
> + .lower_margin = 4,
> + .vsync_len = 1,
> + .dccs = 0x8e00041a,
> + .devctl = 0x060800c0,
> + .fbctrl = 0x00a000a0,
> + .scale = 0x04000400,
> + },
> +};
> +
> +static struct nuc900fb_mach_info nuc950_fb_info __initdata = {
> +#if defined(CONFIG_GPM1040A0_320X240)
> + .displays = &nuc950_lcd_info[0],
> +#else
> + .displays = nuc950_lcd_info,
> +#endif
> + .num_displays = ARRAY_SIZE(nuc950_lcd_info),
> + .default_display = 0,
> + .gpio_dir = 0x00000004,
> + .gpio_dir_mask = 0xFFFFFFFD,
> + .gpio_data = 0x00000004,
> + .gpio_data_mask = 0xFFFFFFFD,
> +};
> +#endif
> +
> static void __init nuc950evb_map_io(void)
> {
> nuc950_map_io();
> @@ -30,6 +74,9 @@ static void __init nuc950evb_map_io(void)
> static void __init nuc950evb_init(void)
> {
> nuc950_board_init();
> +#ifdef CONFIG_FB_NUC900
> + nuc900_fb_set_platdata(&nuc950_fb_info);
> +#endif
> }
>
> MACHINE_START(W90P950EVB, "W90P950EVB")
> diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
> index 1495081..4d1f1ab 100644
> --- a/arch/arm/mach-w90x900/nuc950.c
> +++ b/arch/arm/mach-w90x900/nuc950.c
> @@ -18,6 +18,7 @@
> #include <linux/platform_device.h>
> #include <asm/mach/map.h>
> #include <mach/hardware.h>
> +
> #include "cpu.h"
>
> /* define specific CPU platform device */
> @@ -25,6 +26,9 @@
> static struct platform_device *nuc950_dev[] __initdata = {
> &nuc900_device_kpi,
> &nuc900_device_fmi,
> +#ifdef CONFIG_FB_NUC900
> + &nuc900_device_lcd,
> +#endif
> };
>
> /* define specific CPU platform io map */
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 5a5c303..a943e5e 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -1945,6 +1945,27 @@ config FB_S3C2410_DEBUG
> Turn on debugging messages. Note that you can set/unset at run time
> through sysfs
>
> +config FB_NUC900
> + bool "NUC900 LCD framebuffer support"
> + depends on FB && ARCH_W90X900
> + select FB_CFB_FILLRECT
> + select FB_CFB_COPYAREA
> + select FB_CFB_IMAGEBLIT
> + ---help---
> + Frame buffer driver for the built-in LCD controller in the Nuvoton
> + NUC900 processor
> +
> +config GPM1040A0_320X240
> + bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
> + depends on FB_NUC900
> +
> +config FB_NUC900_DEBUG
> + bool "NUC900 lcd debug messages"
> + depends on FB_NUC900
> + help
> + Turn on debugging messages. Note that you can set/unset at run time
> + through sysfs
> +
> config FB_SM501
> tristate "Silicon Motion SM501 framebuffer support"
> depends on FB && MFD_SM501
> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
> index 4ecb30c..a42ad55 100644
> --- a/drivers/video/Makefile
> +++ b/drivers/video/Makefile
> @@ -129,6 +129,7 @@ obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
> obj-$(CONFIG_FB_CARMINE) += carminefb.o
> obj-$(CONFIG_FB_MB862XX) += mb862xx/
> obj-$(CONFIG_FB_MSM) += msm/
> +obj-$(CONFIG_FB_NUC900) += nuc900fb.o
>
> # Platform or fallback drivers go here
> obj-$(CONFIG_FB_UVESA) += uvesafb.o
> diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c
> new file mode 100644
> index 0000000..c4ff225
> --- /dev/null
> +++ b/drivers/video/nuc900fb.c
> @@ -0,0 +1,842 @@
> +/*
> + *
> + * Copyright (c) 2009 Nuvoton technology corporation
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Description:
> + * Nuvoton LCD Controller Driver
> + * Author:
> + * Wang Qiang (rurality.linux@xxxxxxxxx) 2009/12/11
> + */
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/string.h>
> +#include <linux/mm.h>
> +#include <linux/tty.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/fb.h>
> +#include <linux/init.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/interrupt.h>
> +#include <linux/workqueue.h>
> +#include <linux/wait.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/cpufreq.h>
> +#include <linux/io.h>
> +
> +#ifdef CONFIG_PM
> +#include <linux/pm.h>
> +#endif
> +
> +#include <mach/map.h>
> +#include <mach/regs-clock.h>
> +#include <mach/regs-ldm.h>
> +#include <mach/fb.h>
> +#include <mach/clkdev.h>
> +
> +#include "nuc900fb.h"
> +
> +/* Debugging stuff */
> +#ifdef CONFIG_FB_NUC900_DEBUG
> +static int debug = 1;
> +#define dprintk(msg...) { printk(KERN_DEBUG "nuc900 lcd: " msg); }
> +#else
> +static int debug;
> +#define dprintk(msg...)
> +#endif
> +
> +
> +/*
> + * Initialize the nuc900 video (dual) buffer address
> + */
> +static void nuc900fb_set_lcdaddr(struct fb_info *info)
> +{
> + struct nuc900fb_info *fbi = info->par;
> + void __iomem *regs = fbi->io;
> + unsigned long vbaddr1, vbaddr2;
> + vbaddr1 = info->fix.smem_start;
> + vbaddr2 = info->fix.smem_start;
> + vbaddr2 += info->fix.line_length * info->var.yres;
> + /*set frambuffer start phy addr*/
> + writel(vbaddr1, regs + REG_LCM_VA_BADDR0);
> + writel(vbaddr2, regs + REG_LCM_VA_BADDR1);
> +
> + writel(fbi->regs.lcd_va_fbctrl, regs + REG_LCM_VA_FBCTRL);
> + writel(fbi->regs.lcd_va_scale, regs + REG_LCM_VA_SCALE);
> +}
> +
> +//static void nuc900fb_clk_select(struct fb_info *info, unsigned long pixclk)
> +//{
> +// struct nuc900fb_info *fbi = info->par;
> +// int div;
> +// if (clk <= 15 * 1000 * 1000) {
> +// div = (15 * 1000 * 1000)/
> +// nuc900_driver_clksrc_div(fbi->dev, "ext", 0x2);
> +// }
> +//
> +//}
> +
> +/*
> + * calculate divider for lcd div
> + */
> +static unsigned int nuc900fb_calc_pixclk(struct nuc900fb_info *fbi,
> + unsigned long pixclk)
> +{
> + unsigned long clk = fbi->clk_rate;
> + unsigned long long div;
> +
> + /* pixclk is in picseconds. our clock is in Hz*/
> + /* div = (clk * pixclk)/10^12 */
> + div = (unsigned long long)clk * pixclk;
> + div >>= 12;
> + do_div(div, 625 * 625UL * 625);
> +
> + dprintk("pixclk %ld, divisor is %ld\n", pixclk, (long)div);
> +
> + return div;
> +}
> +
> +/*
> + * Check the video params of 'var'.
> + */
> +static int nuc900fb_check_var(struct fb_var_screeninfo *var,
> + struct fb_info *info)
> +{
> + struct nuc900fb_info *fbi = info->par;
> + struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
> + struct nuc900fb_display *display = NULL;
> + struct nuc900fb_display *default_display = mach_info->displays +
> + mach_info->default_display;
> + int i;
> +
> + dprintk("check_var(var=%p, info=%p)\n", var, info);
> +
> + /* validate x/y resolution */
> + /* choose default mode if possible */
> + if (var->xres == default_display->xres &&
> + var->yres == default_display->yres &&
> + var->bits_per_pixel == default_display->bpp)
> + display = default_display;
> + else
> + for (i = 0; i < mach_info->num_displays; i++)
> + if (var->xres == mach_info->displays[i].xres &&
> + var->yres == mach_info->displays[i].yres &&
> + var->bits_per_pixel == mach_info->displays[i].bpp) {
> + display = mach_info->displays + i;
> + break;
> + }
> +
> + if (display == NULL) {
> + dprintk("wrong resolution or depth %dx%d at %d bit per pixel\n",
> + var->xres, var->yres, var->bits_per_pixel);
> + return -EINVAL;
> + }
> +
> + /* it should be the same size as the display */
> + var->xres_virtual = display->xres;
> + var->yres_virtual = display->yres;
> + var->height = display->height;
> + var->width = display->width;
> +
> + /* copy lcd settings */
> + var->pixclock = display->pixclock;
> + var->left_margin = display->left_margin;
> + var->right_margin = display->right_margin;
> + var->upper_margin = display->upper_margin;
> + var->lower_margin = display->lower_margin;
> + var->vsync_len = display->vsync_len;
> + var->hsync_len = display->hsync_len;
> +
> + var->transp.offset = 0;
> + var->transp.length = 0;
> +
> + fbi->regs.lcd_dccs = display->dccs;
> + fbi->regs.lcd_device_ctrl = display->devctl;
> + fbi->regs.lcd_va_fbctrl = display->fbctrl;
> + fbi->regs.lcd_va_scale = display->scale;
> +
> + /* set R/G/B possions */
> + switch (var->bits_per_pixel) {
> + case 1:
> + case 2:
> + case 4:
> + case 8:
> + default:
> + var->red.offset = 0;
> + var->red.length = var->bits_per_pixel;
> + var->green = var->red;
> + var->blue = var->red;
> + break;
> + case 12:
> + var->red.length = 4;
> + var->green.length = 4;
> + var->blue.length = 4;
> + var->red.offset = 8;
> + var->green.offset = 4;
> + var->blue.offset = 0;
> + break;
> + case 16:
> + var->red.length = 5;
> + var->green.length = 6;
> + var->blue.length = 5;
> + var->red.offset = 11;
> + var->green.offset = 5;
> + var->blue.offset = 0;
> + break;
> + case 18:
> + var->red.length = 6;
> + var->green.length = 6;
> + var->blue.length = 6;
> + var->red.offset = 12;
> + var->green.offset = 6;
> + var->blue.offset = 0;
> + break;
> + case 32:
> + var->red.length = 8;
> + var->green.length = 8;
> + var->blue.length = 8;
> + var->red.offset = 16;
> + var->green.offset = 8;
> + var->blue.offset = 0;
> + break;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Calculate lcd register values from var setting & save into hw
> + */
> +static void nuc900fb_calculate_lcd_regs(const struct fb_info *info,
> + struct nuc900fb_hw *regs)
> +{
> + const struct fb_var_screeninfo *var = &info->var;
> + int vtt = var->height + var->upper_margin + var->lower_margin;
> + int htt = var->width + var->left_margin + var->right_margin;
> + int hsync = var->width + var->right_margin;
> + int vsync = var->height + var->lower_margin;
> + regs->lcd_crtc_size = LCM_CRTC_SIZE_VTTVAL(vtt) |
> + LCM_CRTC_SIZE_HTTVAL(htt);
> + regs->lcd_crtc_dend = LCM_CRTC_DEND_VDENDVAL(var->height) |
> + LCM_CRTC_DEND_HDENDVAL(var->width);
> + regs->lcd_crtc_hr = LCM_CRTC_HR_EVAL(var->width + 5) |
> + LCM_CRTC_HR_SVAL(var->width + 1);
> + regs->lcd_crtc_hsync = LCM_CRTC_HSYNC_EVAL(hsync + var->hsync_len) |
> + LCM_CRTC_HSYNC_SVAL(hsync);
> + regs->lcd_crtc_vr = LCM_CRTC_VR_EVAL(vsync + var->vsync_len) |
> + LCM_CRTC_VR_SVAL(vsync);
> +
> +}
> +
> +/*
> + * Activate (set) the controller from the given framebuffer
> + * information
> + */
> +static void nuc900fb_activate_var(struct fb_info *info)
> +{
> + struct nuc900fb_info *fbi = info->par;
> + void __iomem *regs = fbi->io;
> + struct fb_var_screeninfo *var = &info->var;
> + int clkdiv;
> +
> + clkdiv = nuc900fb_calc_pixclk(fbi, var->pixclock) - 1;
> + if (clkdiv < 0)
> + clkdiv = 0;
> +
> + nuc900fb_calculate_lcd_regs(info, &fbi->regs);
> +
> + /* set the new lcd registers*/
> +
> + dprintk("new lcd register set:\n");
> + dprintk("dccs = 0x%08x\n", fbi->regs.lcd_dccs);
> + dprintk("dev_ctl = 0x%08x\n", fbi->regs.lcd_device_ctrl);
> + dprintk("crtc_size = 0x%08x\n", fbi->regs.lcd_crtc_size);
> + dprintk("crtc_dend = 0x%08x\n", fbi->regs.lcd_crtc_dend);
> + dprintk("crtc_hr = 0x%08x\n", fbi->regs.lcd_crtc_hr);
> + dprintk("crtc_hsync = 0x%08x\n", fbi->regs.lcd_crtc_hsync);
> + dprintk("crtc_vr = 0x%08x\n", fbi->regs.lcd_crtc_vr);
> +
> + writel(fbi->regs.lcd_device_ctrl, regs + REG_LCM_DEV_CTRL);
> + writel(fbi->regs.lcd_crtc_size, regs + REG_LCM_CRTC_SIZE);
> + writel(fbi->regs.lcd_crtc_dend, regs + REG_LCM_CRTC_DEND);
> + writel(fbi->regs.lcd_crtc_hr, regs + REG_LCM_CRTC_HR);
> + writel(fbi->regs.lcd_crtc_hsync, regs + REG_LCM_CRTC_HSYNC);
> + writel(fbi->regs.lcd_crtc_vr, regs + REG_LCM_CRTC_VR);
> +
> + /* set lcd address pointers */
> + nuc900fb_set_lcdaddr(info);
> +
> + writel(fbi->regs.lcd_dccs, regs + REG_LCM_DCCS);
> +}
> +
> +/*
> + * Alters the hardware state.
> + *
> + */
> +static int nuc900fb_set_par(struct fb_info *info)
> +{
> + struct fb_var_screeninfo *var = &info->var;
> +
> + dprintk("nuc900fb_set_par\n");
> +
> + switch (var->bits_per_pixel) {
> + case 32:
> + case 24:
> + case 18:
> + case 16:
> + case 12:
> + info->fix.visual = FB_VISUAL_TRUECOLOR;
> + break;
> + case 1:
> + info->fix.visual = FB_VISUAL_MONO01;
> + break;
> + default:
> + info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
> + break;
> + }
> +
> + info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
> +
> + /* activate this new configuration */
> + nuc900fb_activate_var(info);
> + return 0;
> +}
> +
> +static inline unsigned int chan_to_field(unsigned int chan,
> + struct fb_bitfield *bf)
> +{
> + chan &= 0xffff;
> + chan >>= 16 - bf->length;
> + return chan << bf->offset;
> +}
> +
> +static int nuc900fb_setcolreg(unsigned regno,
> + unsigned red, unsigned green, unsigned blue,
> + unsigned transp, struct fb_info *info)
> +{
> + unsigned int val;
> +
> + switch (info->fix.visual) {
> + case FB_VISUAL_TRUECOLOR:
> + /* true-colour, use pseuo-palette */
> + if (regno < 16) {
> + u32 *pal = info->pseudo_palette;
> +
> + val = chan_to_field(red, &info->var.red);
> + val |= chan_to_field(green, &info->var.green);
> + val |= chan_to_field(blue, &info->var.blue);
> + pal[regno] = val;
> + }
> + break;
> +
> + default:
> + return 1; /* unknown type */
> + }
> + return 0;
> +}
> +
> +/**
> + * nuc900fb_blank
> + *
> + */
> +static int nuc900fb_blank(int blank_mode, struct fb_info *info)
> +{
> +
> + return 0;
> +}
> +
> +static int nuc900fb_debug_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "%s\n", debug ? "on" : "off");
> +}
> +
> +static int nuc900fb_debug_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + if (len < 1)
> + return -EINVAL;
> +
> + if (strnicmp(buf, "on", 2) == 0 ||
> + strnicmp(buf, "1", 1) == 0) {
> + debug = 1;
> + } else if (strnicmp(buf, "off", 3) == 0 ||
> + strnicmp(buf, "0", 1) == 0) {
> + debug = 0;
> +
> + } else {
> + return -EINVAL;
> + }
> +
> + return len;
> +}
> +
> +static DEVICE_ATTR(debug, 0666, nuc900fb_debug_show, nuc900fb_debug_store);
> +
> +static struct fb_ops nuc900fb_ops = {
> + .owner = THIS_MODULE,
> + .fb_check_var = nuc900fb_check_var,
> + .fb_set_par = nuc900fb_set_par,
> + .fb_blank = nuc900fb_blank,
> + .fb_setcolreg = nuc900fb_setcolreg,
> + .fb_fillrect = cfb_fillrect,
> + .fb_copyarea = cfb_copyarea,
> + .fb_imageblit = cfb_imageblit,
> +};
> +
> +
> +static inline void modify_gpio(void __iomem *reg,
> + unsigned long set, unsigned long mask)
> +{
> + unsigned long tmp;
> + tmp = readl(reg) & ~mask;
> + writel(tmp | set, reg);
> +}
> +
> +/*
> + * Initialise LCD-related registers
> + */
> +static int nuc900fb_init_registers(struct fb_info *info)
> +{
> + struct nuc900fb_info *fbi = info->par;
> + struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
> + void __iomem *regs = fbi->io;
> +
> + /*reset the display engine*/
> + writel(0, regs + REG_LCM_DCCS);
> + writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_ENG_RST,
> + regs + REG_LCM_DCCS);
> + ndelay(100);
> + writel(readl(regs + REG_LCM_DCCS) & (~LCM_DCCS_ENG_RST),
> + regs + REG_LCM_DCCS);
> + ndelay(100);
> +
> + writel(0, regs + REG_LCM_DEV_CTRL);
> +
> + /* config gpio output */
> + modify_gpio(W90X900_VA_GPIO + 0x54, mach_info->gpio_dir,
> + mach_info->gpio_dir_mask);
> + modify_gpio(W90X900_VA_GPIO + 0x58, mach_info->gpio_data,
> + mach_info->gpio_data_mask);
> +
> + return 0;
> +}
> +
> +
> +/*
> + * Alloc the SDRAM region of NUC900 for the frame buffer.
> + * The buffer should be a non-cached, non-buffered, memory region
> + * to allow palette and pixel writes without flushing the cache.
> + */
> +static int __init nuc900fb_map_video_memory(struct fb_info *info)
> +{
> + struct nuc900fb_info *fbi = info->par;
> + dma_addr_t map_dma;
> + unsigned long map_size = PAGE_ALIGN(info->fix.smem_len);
> +
> + dprintk("nuc900fb_map_video_memory(fbi=%p) map_size %lu\n",
> + fbi, map_size);
> +
> + info->screen_base = dma_alloc_writecombine(fbi->dev, map_size,
> + &map_dma, GFP_KERNEL);
> +
> + if (info->screen_base != NULL) {
> + dprintk("nuc900fb_map_video_memory: clear %p:%08lx\n",
> + info->screen_base, map_size);
> + memset(info->screen_base, 0x00, map_size);
> +
> + info->fix.smem_start = map_dma;
> + dprintk("nuc900fb_map_video_memory: "
> + "dma=%08lx cpu=%p size=%08lx\n",
> + info->fix.smem_start, info->screen_base, map_size);
> + }
> + return (info->screen_base) ? 0 : -ENOMEM;
> +}
> +
> +static inline void nuc900fb_unmap_video_memory(struct fb_info *info)
> +{
> + struct nuc900fb_info *fbi = info->par;
> + dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
> + info->screen_base, info->fix.smem_start);
> +}
> +
> +static irqreturn_t nuc900fb_irqhandler(int irq, void *dev_id)
> +{
> + struct nuc900fb_info *fbi = dev_id;
> + void __iomem *regs = fbi->io;
> + void __iomem *irq_base = fbi->irq_base;
> + unsigned long lcdirq = readl(regs + REG_LCM_INT_CS);
> +
> + if (lcdirq & LCM_INT_CS_DISP_F_STATUS) {
> + writel(readl(irq_base) | 1<<30, irq_base);
> +
> + /* wait VA_EN low */
> + if ((readl(regs + REG_LCM_DCCS) &
> + LCM_DCCS_SINGLE) == LCM_DCCS_SINGLE)
> + while ((readl(regs + REG_LCM_DCCS) &
> + LCM_DCCS_VA_EN) == LCM_DCCS_VA_EN)
> + ;
> + /* display_out-enable */
> + writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_DISP_OUT_EN,
> + regs + REG_LCM_DCCS);
> + /* va-enable*/
> + writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_VA_EN,
> + regs + REG_LCM_DCCS);
> + } else if (lcdirq & LCM_INT_CS_UNDERRUN_INT) {
> + writel(readl(irq_base) | LCM_INT_CS_UNDERRUN_INT, irq_base);
> + } else if (lcdirq & LCM_INT_CS_BUS_ERROR_INT) {
> + writel(readl(irq_base) | LCM_INT_CS_BUS_ERROR_INT, irq_base);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +#ifdef CONFIG_CPU_FREQ
> +
> +static int nuc900fb_cpufreq_transition(struct notifier_block *nb,
> + unsigned long val, void *data)
> +{
> + struct nuc900fb_info *info;
> + struct fb_info *fbinfo;
> + long delta_f;
> + info = container_of(nb, struct nuc900fb_info, freq_transition);
> + fbinfo = platform_get_drvdata(to_platform_device(info->dev));
> +
> + delta_f = info->clk_rate - clk_get_rate(info->clk);
> +
> + if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
> + (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
> + info->clk_rate = clk_get_rate(info->clk);
> + nuc900fb_activate_var(fbinfo);
> + }
> +
> + return 0;
> +}
> +
> +static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
> +{
> + fbi->freq_transition.notifier_call = nuc900fb_cpufreq_transition;
> + return cpufreq_register_notifier(&fbi->freq_transition,
> + CPUFREQ_TRANSITION_NOTIFIER);
> +}
> +
> +static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *fbi)
> +{
> + cpufreq_unregister_notifier(&fbi->freq_transition,
> + CPUFREQ_TRANSITION_NOTIFIER);
> +}
> +#else
> +static inline int nuc900fb_cpufreq_transition(struct notifier_block *nb,
> + unsigned long val, void *data)
> +{
> + return 0;
> +}
> +
> +static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
> +{
> + return 0;
> +}
> +
> +static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *info)
> +{
> +}
> +#endif
> +
> +static char driver_name[] = "nuc900fb";
> +
> +static int __init nuc900fb_probe(struct platform_device *pdev)
> +{
> + struct nuc900fb_info *fbi;
> + struct nuc900fb_display *display;
> + struct fb_info *fbinfo;
> + struct nuc900fb_mach_info *mach_info;
> + struct resource *res;
> + int ret;
> + int irq;
> + int i;
> + int size;
> +
> + dprintk("devinit\n");
> + mach_info = pdev->dev.platform_data;
> + if (mach_info == NULL) {
> + dev_err(&pdev->dev,
> + "no platform data for lcd, cannot attach\n");
> + return -EINVAL;
> + }
> +
> + if (mach_info->default_display > mach_info->num_displays) {
> + dev_err(&pdev->dev,
> + "default display No. is %d but only %d displays \n",
> + mach_info->default_display, mach_info->num_displays);
> + return -EINVAL;
> + }
> +
> +
> + display = mach_info->displays + mach_info->default_display;
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(&pdev->dev, "no irq for device\n");
> + return -ENOENT;
> + }
> +
> + fbinfo = framebuffer_alloc(sizeof(struct nuc900fb_info), &pdev->dev);
> + if (!fbinfo)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, fbinfo);
> +
> + fbi = fbinfo->par;
> + fbi->dev = &pdev->dev;
> +
> +#ifdef CONFIG_CPU_NUC950
> + fbi->drv_type = LCDDRV_NUC950;
> +#endif
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + size = (res->end - res->start) + 1;
> + fbi->mem = request_mem_region(res->start, size, pdev->name);
> + if (fbi->mem == NULL) {
> + dev_err(&pdev->dev, "failed to alloc memory region\n");
> + ret = -ENOENT;
> + goto free_fb;
> + }
> +
> + fbi->io = ioremap(res->start, size);
> + if (fbi->io == NULL) {
> + dev_err(&pdev->dev, "ioremap() of lcd registers failed\n");
> + ret = -ENXIO;
> + goto release_mem_region;
> + }
> +
> + fbi->irq_base = fbi->io + REG_LCM_INT_CS;
> +
> +
> + /* Stop the LCD */
> + writel(0, fbi->io + REG_LCM_DCCS);
> +
> + /* fill the fbinfo*/
> + strcpy(fbinfo->fix.id, driver_name);
> + fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
> + fbinfo->fix.type_aux = 0;
> + fbinfo->fix.xpanstep = 0;
> + fbinfo->fix.ypanstep = 0;
> + fbinfo->fix.ywrapstep = 0;
> + fbinfo->fix.accel = FB_ACCEL_NONE;
> + fbinfo->var.nonstd = 0;
> + fbinfo->var.activate = FB_ACTIVATE_NOW;
> + fbinfo->var.accel_flags = 0;
> + fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
> + fbinfo->fbops = &nuc900fb_ops;
> + fbinfo->flags = FBINFO_FLAG_DEFAULT;
> + fbinfo->pseudo_palette = &fbi->pseudo_pal;
> +
> + ret = request_irq(irq, nuc900fb_irqhandler, IRQF_DISABLED,
> + pdev->name, fbinfo);
> + if (ret) {
> + dev_err(&pdev->dev, "cannot register irq handler %d -err %d\n",
> + irq, ret);
> + ret = -EBUSY;
> + goto release_regs;
> + }
> +
> + nuc900_driver_clksrc_div(&pdev->dev, "ext", 0x2);
> +
> + fbi->clk = clk_get(&pdev->dev, NULL);
> + if (!fbi->clk || IS_ERR(fbi->clk)) {
> + printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
> + ret = -ENOENT;
> + goto release_irq;
> + }
> +
> + clk_enable(fbi->clk);
> + dprintk("got and enabled clock\n");
> +
> + fbi->clk_rate = clk_get_rate(fbi->clk);
> +
> + /* calutate the video buffer size */
> + for (i = 0; i < mach_info->num_displays; i++) {
> + unsigned long smem_len = mach_info->displays[i].xres;
> + smem_len *= mach_info->displays[i].yres;
> + smem_len *= mach_info->displays[i].bpp;
> + smem_len >>= 3;
> + if (fbinfo->fix.smem_len < smem_len)
> + fbinfo->fix.smem_len = smem_len;
> + }
> +
> + /* Initialize Video Memory */
> + ret = nuc900fb_map_video_memory(fbinfo);
> + if (ret) {
> + printk(KERN_ERR "Failed to allocate video RAM: %x\n", ret);
> + goto release_clock;
> + }
> +
> + dprintk("got video memory\n");
> +
> + fbinfo->var.xres = display->xres;
> + fbinfo->var.yres = display->yres;
> + fbinfo->var.bits_per_pixel = display->bpp;
> +
> + nuc900fb_init_registers(fbinfo);
> +
> + nuc900fb_check_var(&fbinfo->var, fbinfo);
> +
> + ret = nuc900fb_cpufreq_register(fbi);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to register cpufreq\n");
> + goto free_video_memory;
> + }
> +
> + ret = register_framebuffer(fbinfo);
> + if (ret) {
> + printk(KERN_ERR "failed to register framebuffer device: %d\n",
> + ret);
> + goto free_cpufreq;
> + }
> +
> + /* create device files */
> + ret = device_create_file(&pdev->dev, &dev_attr_debug);
> + if (ret)
> + printk(KERN_ERR "failed to add debug attribute\n");
> +
> +
> + printk(KERN_INFO "fb%d: %s frame buffer device\n",
> + fbinfo->node, fbinfo->fix.id);
> +
> + return 0;
> +
> +free_cpufreq:
> + nuc900fb_cpufreq_deregister(fbi);
> +free_video_memory:
> + nuc900fb_unmap_video_memory(fbinfo);
> +release_clock:
> + clk_disable(fbi->clk);
> + clk_put(fbi->clk);
> +release_irq:
> + free_irq(irq, fbi);
> +release_regs:
> + iounmap(fbi->io);
> +release_mem_region:
> + release_mem_region((unsigned long)fbi->mem, size);
> +free_fb:
> + framebuffer_release(fbinfo);
> + return ret;
> +}
> +
> +/*
> + * shutdown the lcd controller
> + */
> +static void nuc900fb_stop_lcd(struct fb_info *info)
> +{
> + struct nuc900fb_info *fbi = info->par;
> + void __iomem *regs = fbi->io;
> + unsigned long flags;
> +
> + local_irq_save(flags);
> + writel((~LCM_DCCS_DISP_INT_EN) | (~LCM_DCCS_VA_EN) | (~LCM_DCCS_OSD_EN),
> + regs + REG_LCM_DCCS);
> + local_irq_restore(flags);
> +}
> +
> +/*
> + * Cleanup
> + */
> +static int nuc900fb_remove(struct platform_device *pdev)
> +{
> + struct fb_info *fbinfo = platform_get_drvdata(pdev);
> + struct nuc900fb_info *fbi = fbinfo->par;
> + int irq;
> +
> + nuc900fb_stop_lcd(fbinfo);
> + msleep(1);
> +
> + nuc900fb_unmap_video_memory(fbinfo);
> +
> + iounmap(fbi->io);
> +
> + irq = platform_get_irq(pdev, 0);
> + free_irq(irq, fbi);
> +
> + release_resource(fbi->mem);
> + kfree(fbi->mem);
> +
> + platform_set_drvdata(pdev, NULL);
> + framebuffer_release(fbinfo);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +
> +/*
> + * suspend and resume support for the lcd controller
> + */
> +
> +static int nuc900fb_suspend(struct platform_device *dev, pm_message_t state)
> +{
> + struct fb_info *fbinfo = platform_get_drvdata(dev);
> + struct nuc900fb_info *info = fbinfo->par;
> +
> + nuc900fb_stop_lcd();
> + msleep(1);
> + clk_disable(info->clk);
> + return 0;
> +}
> +
> +static int nuc900fb_resume(struct platform_device *dev)
> +{
> + struct fb_info *fbinfo = platform_get_drvdata(dev);
> + struct nuc900fb_info *fbi = fbinfo->par;
> +
> + dprintk("nuc900fb resume\n");
> +
> + clk_enable(fbi->clk);
> + msleep(1);
> +
> + nuc900fb_init_registers(fbinfo);
> + nuc900fb_activate_var(bfinfo);
> +
> + return 0;
> +}
> +
> +#else
> +#define nuc900fb_suspend NULL
> +#define nuc900fb_resume NULL
> +#endif
> +
> +static struct platform_driver nuc900fb_driver = {
> + .probe = nuc900fb_probe,
> + .remove = nuc900fb_remove,
> + .suspend = nuc900fb_suspend,
> + .resume = nuc900fb_resume,
> + .driver = {
> + .name = "nuc900-lcd",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +int __devinit nuc900fb_init(void)
> +{
> + return platform_driver_register(&nuc900fb_driver);
> +}
> +
> +static void __exit nuc900fb_cleanup(void)
> +{
> + platform_driver_unregister(&nuc900fb_driver);
> +}
> +
> +module_init(nuc900fb_init);
> +module_exit(nuc900fb_cleanup);
> +
> +MODULE_DESCRIPTION("Framebuffer driver for the NUC900");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/video/nuc900fb.h b/drivers/video/nuc900fb.h
> new file mode 100644
> index 0000000..6c23aa3
> --- /dev/null
> +++ b/drivers/video/nuc900fb.h
> @@ -0,0 +1,55 @@
> +/*
> + *
> + * Copyright (c) 2009 Nuvoton technology corporation
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Auther:
> + * Wang Qiang(rurality.linux@xxxxxxxxx) 2009/12/16
> + */
> +
> +#ifndef __NUC900FB_H
> +#define __NUC900FB_H
> +
> +#include <mach/map.h>
> +#include <mach/fb.h>
> +
> +enum nuc900_lcddrv_type {
> + LCDDRV_NUC910,
> + LCDDRV_NUC930,
> + LCDDRV_NUC932,
> + LCDDRV_NUC950,
> + LCDDRV_NUC960,
> +};
> +
> +
> +#define PALETTE_BUFFER_SIZE 256
> +#define PALETTE_BUFF_CLEAR (0x80000000) /* entry is clear/invalid */
> +
> +struct nuc900fb_info {
> + struct device *dev;
> + struct clk *clk;
> +
> + struct resource *mem;
> + void __iomem *io;
> + void __iomem *irq_base;
> + int drv_type;
> + struct nuc900fb_hw regs;
> + unsigned long clk_rate;
> +
> +#ifdef CONFIG_CPU_FREQ
> + struct notifier_block freq_transition;
> +#endif
> +
> + /* keep these registers in case we need to re-write palette */
> + u32 palette_buffer[PALETTE_BUFFER_SIZE];
> + u32 pseudo_pal[16];
> +};
> +
> +int nuc900fb_init(void);
> +
> +#endif /* __NUC900FB_H */
> --
> 1.6.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
