From: Ye Bin <yebin10@xxxxxxxxxx>
We encountered a problem that the file system could not be mounted in
the power-off scenario. The analysis of the file system mirror shows that
only part of the data is written to the last commit block.
The valid data of the commit block is concentrated in the first sector.
However, the data of the entire block is involved in the checksum calculation.
For different hardware, the minimum atomic unit may be different.
If the checksum of a committed block is incorrect, clear the data except the
'commit_header' and then calculate the checksum. If the checkusm is correct,
it is considered that the block is partially committed. However, if there are
valid description/revoke blocks, it is considered that the data is abnormal
and the log replay is stopped.
Signed-off-by: Ye Bin <yebin10@xxxxxxxxxx>
---
fs/jbd2/recovery.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 1f7664984d6e..594bf02a709f 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -443,6 +443,27 @@ static int jbd2_commit_block_csum_verify(journal_t *j, void *buf)
return provided == cpu_to_be32(calculated);
}
+static bool jbd2_commit_block_csum_verify_partial(journal_t *j, void *buf)
+{
+ struct commit_header *h;
+ __be32 provided;
+ __u32 calculated;
+ void *tmpbuf;
+
+ tmpbuf = kzalloc(j->j_blocksize, GFP_KERNEL);
+ if (!tmpbuf)
+ return false;
+
+ memcpy(tmpbuf, buf, sizeof(struct commit_header));
+ h = tmpbuf;
+ provided = h->h_chksum[0];
+ h->h_chksum[0] = 0;
+ calculated = jbd2_chksum(j, j->j_csum_seed, tmpbuf, j->j_blocksize);
+ kfree(tmpbuf);
+
+ return provided == cpu_to_be32(calculated);
+}
+
static int jbd2_block_tag_csum_verify(journal_t *j, journal_block_tag_t *tag,
journal_block_tag3_t *tag3,
void *buf, __u32 sequence)
@@ -479,6 +500,7 @@ static int do_one_pass(journal_t *journal,
int descr_csum_size = 0;
int block_error = 0;
bool need_check_commit_time = false;
+ bool has_partial_commit = false;
__u64 last_trans_commit_time = 0, commit_time;
/*
@@ -590,6 +612,14 @@ static int do_one_pass(journal_t *journal,
next_log_block);
}
+ if (pass == PASS_SCAN && has_partial_commit) {
+ pr_err("JBD2: Detect validate descriptor block %lu after incomplete commit block\n",
+ next_log_block);
+ err = -EFSBADCRC;
+ brelse(bh);
+ goto failed;
+ }
+
/* If it is a valid descriptor block, replay it
* in pass REPLAY; if journal_checksums enabled, then
* calculate checksums in PASS_SCAN, otherwise,
@@ -810,6 +840,14 @@ static int do_one_pass(journal_t *journal,
if (pass == PASS_SCAN &&
!jbd2_commit_block_csum_verify(journal,
bh->b_data)) {
+ if (jbd2_commit_block_csum_verify_partial(
+ journal,
+ bh->b_data)) {
+ pr_notice("JBD2: Find incomplete commit block in transaction %u block %lu\n",
+ next_commit_ID, next_log_block);
+ has_partial_commit = true;
+ goto chksum_ok;
+ }
chksum_error:
if (commit_time < last_trans_commit_time)
goto ignore_crc_mismatch;
@@ -824,6 +862,7 @@ static int do_one_pass(journal_t *journal,
}
}
if (pass == PASS_SCAN) {
+ chksum_ok:
last_trans_commit_time = commit_time;
head_block = next_log_block;
}
@@ -843,6 +882,15 @@ static int do_one_pass(journal_t *journal,
next_log_block);
need_check_commit_time = true;
}
+
+ if (pass == PASS_SCAN && has_partial_commit) {
+ pr_err("JBD2: Detect validate revoke block %lu after incomplete commit block\n",
+ next_log_block);
+ err = -EFSBADCRC;
+ brelse(bh);
+ goto failed;
+ }
+
/* If we aren't in the REVOKE pass, then we can
* just skip over this block. */
if (pass != PASS_REVOKE) {
--
2.31.1
