Hulk Robot reported a BUG_ON:
==================================================================
EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0,
block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters
kernel BUG at fs/ext4/ext4_jbd2.c:53!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1
RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline]
RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116
[...]
Call Trace:
ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795
generic_perform_write+0x279/0x3c0 mm/filemap.c:3344
ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270
ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520
do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732
do_iter_write+0x107/0x430 fs/read_write.c:861
vfs_writev fs/read_write.c:934 [inline]
do_pwritev+0x1e5/0x380 fs/read_write.c:1031
[...]
==================================================================
Above issue may happen as follows:
cpu1 cpu2
__________________________|__________________________
do_pwritev
vfs_writev
do_iter_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_destroy_inline_data_nolock
clear EXT4_STATE_MAY_INLINE_DATA
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
ext4_mb_regular_allocator
ext4_mb_good_group_nolock
ext4_mb_init_group
ext4_mb_init_cache
ext4_mb_generate_buddy --> error
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_restore_inline_data
set EXT4_STATE_MAY_INLINE_DATA
ext4_block_write_begin
ext4_da_write_end
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_write_inline_data_end
handle=NULL
ext4_journal_stop(handle)
__ext4_journal_stop
ext4_put_nojournal(handle)
ref_cnt = (unsigned long)handle
BUG_ON(ref_cnt == 0) ---> BUG_ON
The lock held by ext4_convert_inline_data is xattr_sem, but the lock
held by generic_perform_write is i_rwsem. Therefore, the two locks can
be concurrent.
To solve above issue, we add inode_lock() for ext4_convert_inline_data().
At the same time, move ext4_convert_inline_data() in front of
ext4_punch_hole(), remove similar handling from ext4_punch_hole().
Fixes: 0c8d414f163f ("ext4: let fallocate handle inline data correctly")
Cc: stable@xxxxxxxxxxxxxxx
Reported-by: Hulk Robot <hulkci@xxxxxxxxxx>
Signed-off-by: Baokun Li <libaokun1@xxxxxxxxxx>
---
V1->V2:
Increase the range of the inode_lock.
V2->V3:
Move the lock outside the ext4_convert_inline_data().
And reorganize ext4_fallocate().
fs/ext4/extents.c | 10 ++++++----
fs/ext4/inode.c | 9 ---------
2 files changed, 6 insertions(+), 13 deletions(-)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e473fde6b64b..474479ce76e0 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4693,15 +4693,17 @@ long ext4_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
FALLOC_FL_INSERT_RANGE))
return -EOPNOTSUPP;
+ inode_lock(inode);
+ ret = ext4_convert_inline_data(inode);
+ inode_unlock(inode);
+ if (ret)
+ goto exit;
+
if (mode & FALLOC_FL_PUNCH_HOLE) {
ret = ext4_punch_hole(file, offset, len);
goto exit;
}
- ret = ext4_convert_inline_data(inode);
- if (ret)
- goto exit;
-
if (mode & FALLOC_FL_COLLAPSE_RANGE) {
ret = ext4_collapse_range(file, offset, len);
goto exit;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 646ece9b3455..4779673d733e 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3967,15 +3967,6 @@ int ext4_punch_hole(struct file *file, loff_t offset, loff_t length)
trace_ext4_punch_hole(inode, offset, length, 0);
- ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
- if (ext4_has_inline_data(inode)) {
- filemap_invalidate_lock(mapping);
- ret = ext4_convert_inline_data(inode);
- filemap_invalidate_unlock(mapping);
- if (ret)
- return ret;
- }
-
/*
* Write out all dirty pages to avoid race conditions
* Then release them.
--
2.31.1
