Hello Eric!
On Thu 07-04-22 15:22:22, Eric Whitney wrote:
> I've been seeing consistent failures of ext4/052 in the 1k test scenario when
> running kvm-xfstests with -g auto since 5.17-rc4 in my upstream regression
> runs.The kernels have lockdep enabled and the test failure is caused by a kernel
> warning reporting a possible circular locking dependency. I've included the
> lockdep splat below.
Thanks for the splat!
> It's difficult to reproduce this failure. The only way I've been able to do
> so is to start an entire testing run with "kvm-xfstests -g auto". This runs
> all the tests in the auto group in the 4k test scenario, followed by the tests
> in the auto group in the 1k scenario up to ext4/052, when the failure
> consistently occurs. 500 runs of ext4/052 on 1k alone fail to reproduce the
> failure, as do other combination of tests or running the quick group instead
> of auto.
>
> Reverting a kernel commit that landed in -rc4 appears to correct this failure:
> bf23747ee053 ("loop: revert "make autoclear operation asynchronous" ").
> However, I'm told there were good reasons for that revert, so simply reverting
> the revert isn't a solution.
>
> The original patch reverted by this patch landed in 5.17-rc1. Repeated test
> runs on 5.16 final and 5.17-rc3 as described above have failed to reproduce
> the failure.
This is indeed curious but I think in this case lockdep is just confused by
treating all superblocks the same (s_umount on all superblocks is from the
same locking class) where for loop devices it is substantial which
superblock is on the backing device and which is on the loop device.
If I understand the complaint correctly, it is complaining about a chain
like:
umount of loopmounted fs loop worker freezing process
cleanup_mnt()
deactivate_super()
down_write(sb->s_umount);
...
blkdev_put(loopdev)
mutex_lock(disk->open_mutex);
__loop_clr_fd()
wait for all loop IO to finish
file_start_write(backing_file)
- blocks on frozen fs
freeze_super(backing fs)
...
sb_wait_write()
down_write(sb->s_umount);
And this is not a deadlock only because backing fs != loopmounted fs but
lockdep doesn't know...
Anyway Christoph's patches should fix this report because we won't wait for
IO from __loop_clr_fd() anymore.
Honza
> ext4/052 16s ... [01:27:37][ 3785.331537] run fstests ext4/052 at 2022-04-04 01:27:37
> [ 3785.584084] EXT4-fs (vdd): mounted filesystem with ordered data mode. Quota mode: none.
> [ 3785.732395] EXT4-fs (vdc): mounted filesystem with ordered data mode. Quota mode: none.
> [ 3785.808616] loop0: detected capacity change from 0 to 41943040
> [ 3785.848334] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: none.
> [ 3800.334824]
> [ 3800.335030] ======================================================
> [ 3800.335712] WARNING: possible circular locking dependency detected
> [ 3800.336386] 5.18.0-rc1 #1 Not tainted
> [ 3800.336789] ------------------------------------------------------
> [ 3800.337466] umount/900388 is trying to acquire lock:
> [ 3800.337905] ffff88800ba32d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x7f/0x500
> [ 3800.338607]
> [ 3800.338607] but task is already holding lock:
> [ 3800.339063] ffff888005d1f118 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_put+0x3a/0x220
> [ 3800.339686]
> [ 3800.339686] which lock already depends on the new lock.
> [ 3800.339686]
> [ 3800.340319]
> [ 3800.340319] the existing dependency chain (in reverse order) is:
> [ 3800.340896]
> [ 3800.340896] -> #4 (&disk->open_mutex){+.+.}-{3:3}:
> [ 3800.341383] __mutex_lock+0x7c/0x940
> [ 3800.341704] blkdev_put+0x3a/0x220
> [ 3800.342011] ext4_put_super+0x2fb/0x5b0
> [ 3800.342352] generic_shutdown_super+0x71/0x120
> [ 3800.342742] kill_block_super+0x21/0x50
> [ 3800.343082] deactivate_locked_super+0x2e/0x90
> [ 3800.343467] cleanup_mnt+0x131/0x190
> [ 3800.343788] task_work_run+0x59/0x90
> [ 3800.344109] exit_to_user_mode_prepare+0x19d/0x1a0
> [ 3800.344523] syscall_exit_to_user_mode+0x19/0x60
> [ 3800.344923] do_syscall_64+0x48/0x90
> [ 3800.345244] entry_SYSCALL_64_after_hwframe+0x44/0xae
> [ 3800.345656]
> [ 3800.345656] -> #3 (&type->s_umount_key#32){++++}-{3:3}:
> [ 3800.346104] down_write+0x2a/0x60
> [ 3800.346363] freeze_super+0x80/0x1b0
> [ 3800.346615] __x64_sys_ioctl+0x62/0xb0
> [ 3800.346882] do_syscall_64+0x38/0x90
> [ 3800.347136] entry_SYSCALL_64_after_hwframe+0x44/0xae
> [ 3800.347479]
> [ 3800.347479] -> #2 (sb_writers#3){++++}-{0:0}:
> [ 3800.347838] loop_process_work+0x53b/0x900
> [ 3800.348124] process_one_work+0x271/0x590
> [ 3800.348403] worker_thread+0x4f/0x3d0
> [ 3800.348665] kthread+0xdf/0x110
> [ 3800.348905] ret_from_fork+0x1f/0x30
> [ 3800.349170]
> [ 3800.349170] -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
> [ 3800.349652] process_one_work+0x24b/0x590
> [ 3800.349932] worker_thread+0x4f/0x3d0
> [ 3800.350189] kthread+0xdf/0x110
> [ 3800.350448] ret_from_fork+0x1f/0x30
> [ 3800.350706]
> [ 3800.350706] -> #0 ((wq_completion)loop0){+.+.}-{0:0}:
> [ 3800.351103] __lock_acquire+0x1182/0x1ed0
> [ 3800.351394] lock_acquire+0xca/0x2f0
> [ 3800.351645] flush_workqueue+0xa9/0x500
> [ 3800.351913] drain_workqueue+0xa0/0x110
> [ 3800.352180] destroy_workqueue+0x36/0x250
> [ 3800.352456] __loop_clr_fd+0xad/0x460
> [ 3800.352713] blkdev_put+0xc0/0x220
> [ 3800.352990] deactivate_locked_super+0x2e/0x90
> [ 3800.353319] cleanup_mnt+0x131/0x190
> [ 3800.353570] task_work_run+0x59/0x90
> [ 3800.353824] exit_to_user_mode_prepare+0x19d/0x1a0
> [ 3800.354148] syscall_exit_to_user_mode+0x19/0x60
> [ 3800.354462] do_syscall_64+0x48/0x90
> [ 3800.354713] entry_SYSCALL_64_after_hwframe+0x44/0xae
> [ 3800.355056]
> [ 3800.355056] other info that might help us debug this:
> [ 3800.355056]
> [ 3800.355542] Chain exists of:
> [ 3800.355542] (wq_completion)loop0 --> &type->s_umount_key#32 --> &disk->open_mutex
> [ 3800.355542]
> [ 3800.356269] Possible unsafe locking scenario:
> [ 3800.356269]
> [ 3800.356631] CPU0 CPU1
> [ 3800.356909] ---- ----
> [ 3800.357187] lock(&disk->open_mutex);
> [ 3800.357418] lock(&type->s_umount_key#32);
> [ 3800.357827] lock(&disk->open_mutex);
> [ 3800.358210] lock((wq_completion)loop0);
> [ 3800.358458]
> [ 3800.358458] *** DEADLOCK ***
> [ 3800.358458]
> [ 3800.358823] 1 lock held by umount/900388:
> [ 3800.359069] #0: ffff888005d1f118 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_put+0x3a/0x220
> [ 3800.359581]
> [ 3800.359581] stack backtrace:
> [ 3800.359866] CPU: 1 PID: 900388 Comm: umount Not tainted 5.18.0-rc1 #1
> [ 3800.360259] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
> [ 3800.360781] Call Trace:
> [ 3800.360981] <TASK>
> [ 3800.361150] dump_stack_lvl+0x45/0x59
> [ 3800.361439] check_noncircular+0xf2/0x110
> [ 3800.361753] __lock_acquire+0x1182/0x1ed0
> [ 3800.362068] lock_acquire+0xca/0x2f0
> [ 3800.362349] ? flush_workqueue+0x7f/0x500
> [ 3800.362665] ? lockdep_init_map_type+0x47/0x260
> [ 3800.363021] flush_workqueue+0xa9/0x500
> [ 3800.363323] ? flush_workqueue+0x7f/0x500
> [ 3800.363639] drain_workqueue+0xa0/0x110
> [ 3800.363941] destroy_workqueue+0x36/0x250
> [ 3800.364256] __loop_clr_fd+0xad/0x460
> [ 3800.364546] blkdev_put+0xc0/0x220
> [ 3800.364814] deactivate_locked_super+0x2e/0x90
> [ 3800.365162] cleanup_mnt+0x131/0x190
> [ 3800.365443] task_work_run+0x59/0x90
> [ 3800.365723] exit_to_user_mode_prepare+0x19d/0x1a0
> [ 3800.366100] syscall_exit_to_user_mode+0x19/0x60
> [ 3800.366460] do_syscall_64+0x48/0x90
> [ 3800.366747] entry_SYSCALL_64_after_hwframe+0x44/0xae
> [ 3800.367143] RIP: 0033:0x7fa7fa263e27
> [ 3800.367424] Code: 00 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 00 00 00 b8 a6 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 00 0c 00 f7 d8 64 89 01 48
> [ 3800.368857] RSP: 002b:00007ffd53d1e268 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
> [ 3800.369439] RAX: 0000000000000000 RBX: 00007fa7fa387264 RCX: 00007fa7fa263e27
> [ 3800.369990] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000055848a1b6b90
> [ 3800.370542] RBP: 000055848a1b6960 R08: 0000000000000000 R09: 00007ffd53d1cfe0
> [ 3800.371095] R10: 000055848a1b6bb0 R11: 0000000000000246 R12: 0000000000000000
> [ 3800.371645] R13: 000055848a1b6b90 R14: 000055848a1b6a70 R15: 0000000000000000
> [ 3800.372197] </TASK>
> [ 3801.788395] EXT4-fs (vdd): mounted filesystem with ordered data mode. Quota mode: none.
> _check_dmesg: something found in dmesg (see /results/ext4/results-1k/ext4/052.dmesg)
>
>
--
Jan Kara <jack@xxxxxxxx>
SUSE Labs, CR
