Gabriel Krisman Bertazi <krisman@xxxxxxxxxxxxx> writes:
> Hi,
>
> While I've been exploring the performance of different DIO
> implementations, I've come across what seems a noticeable regression
> (22% slowdown) in 4k writes in Ext4 when comparing the original
> direct-io with the current iomap dio implementation, as existing on
> linus/master. Perhaps you already know about this, but I'm having a
> hard time understanding the root cause, in order to attempt to improve
> the situation.
Hi Ted,
Sorry for the ping, but do you have any ideas of what we are seeing
here?
Thank you,
> * Benchmark
>
> For starter, I'm comparing three kernels, built with same config and
> compiler (gcc-8.4.0 (locally built)). My DUT is a Samsung SSD 970 EVO
> Plus 250GB dedicated to this test (no concurrent IO).
>
> - Kernel 1: Commit immediately before iomap for ext4 is merged
> ("f112a2fd1f59"). On the data below, this kernel is identified as
> 5.4.0-original-dio. Available in a public branch at:
>
> <gitlab.collabora.com:krisman/linux.git -b dio/original-dio>
>
> - Kernel 2: tag 5.5 (first release with dio-iomap). In the data
> below, identified as 5.5.0-old-iomap. For completeness, it is
> available at:
>
> <gitlab.collabora.com:krisman/linux.git -b dio/old-dio>
>
> - Kernel 3: Kernel tag 5.13-rc3. In the data below, identified as
> 5.13-rc3-iomap. For completeness, it is available at:
>
> <gitlab.collabora.com:krisman/linux.git -b dio/iomap>
>
> I ran the fio job below with the combinations: BS=4k,16k and RW=read,write
>
> fio --ioengine libaio --size=2G --direct=1 --iodepth=64 --time_based=1 \
> --thread=1 --overwrite=1 --runtime=100 --output-format=terse
>
> For every kernel test, the file system was recreated, and the 2GB file
> was pre-allocated.
>
> In an attempt to further isolate the problem, I tested both xfs and ext4
> in the same condition.
>
> The script I used is available at:
>
> <https://people.collabora.com/~krisman/dio/bench.sh>
>
> * Results
>
> I obtained the following performance results, relative to the baseline
> 5.4.0-original-dio.
>
> | IOPS |
> | kernel | read-4k | read-16k | write-4k | write-16k |
> |------------------------+------------------+-------------------+-------------------+-------------------+
> | 5.13.0-rc3-iomap-ext4 | 1.01192950082305 | 1.00026413252562 | 0.806377013901006 | 1.00020735846057 |
> | 5.5.0-old-iomap-ext4 | 1.01154156662508 | 0.998753983520427 | 0.777051125458035 | 0.999937792461829 |
> | 5.13.0-rc3-iomap-xfs | 1.00234888443008 | 1.00027645151444 | 1.00996172750095 | 1.00156349447934 |
> | 5.5.0-old-iomap-xfs | 1.00010412786902 | 1.00202731110586 | 1.01502846821264 | 1.00149431330769 |
>
>
> Total IO is the amount of data copied (relative to baseline).
>
> | TOTAL_IO
> | kernel | read-4k | read-16k | write-4k | write-16k |
> |------------------------+------------------+-------------------+-------------------+-------------------|
> | 5.13.0-rc3-iomap-ext4 | 1.01193023173156 | 1.00026332569559 | 0.806377530301477 | 1.00014686835205 |
> | 5.5.0-old-iomap-ext4 | 1.01154196621591 | 0.998758131673757 | 0.777050753425118 | 0.999902824986834 |
> | 5.13.0-rc3-iomap-xfs | 1.00234893734134 | 1.00027535318322 | 1.00996437458991 | 1.00156305646789 |
> | 5.5.0-old-iomap-xfs | 1.00010328564078 | 1.00202831801018 | 1.01503060595258 | 1.00149069402364 |
>
> With a visualization of the above data here:
>
> <https://people.collabora.com/~krisman/dio/bench.png>
>
> The only out of the ordinary result seems to be in write-4k for Ext4,
> which suggests around 20% less IOPS (and total IO) for iomap in
> comparison to the original DIO. This is not a one-off run, as it seems
> to be consistently reproducible with more test runs in my environment.
> The performance reduction also doesn't reproduce on XFS.
>
> I tried to limit the influence of other parts of the kernel that could
> affect the behavior by comparing the kernel immediately before the
> introduction of dio-iomap for ext4 with the first version with that
> feature. By also observing that xfs doesn't change, I believe it to be
> ext4 specific.
>
> I'm also publishing raw data and all related material to the link below,
> in case anyone wants to tinker with my data:
>
> https://people.collabora.com/~krisman/dio/
>
> Perhaps I'm missing something obvious. But I can't pinpoint a specific
> problem with my analysis. Is this expected, given the way ext4 iomap
> work? Do you have any idea of the root cause or how it can be improved?
>
> I will keep looking to this issue, but I'd like to share this partial
> result, in case there is a problem with my analysis, or if you have any
> suggestion.
>
> Thanks,
--
Gabriel Krisman Bertazi
