Add this test to check for regression which was reported when ext4 bmap
aops was moved to use iomap APIs. jbd2 calls bmap() kernel function
from fs/inode.c which was failing since iomap_bmap() implementation earlier
returned 0 for block addr > INT_MAX.
This regression was fixed with following kernel commit [1]
commit b75dfde1212991b24b220c3995101c60a7b8ae74
("fibmap: Warn and return an error in case of block > INT_MAX")
[1]: https://patchwork.ozlabs.org/patch/1279914
w/o the kernel fix we get below errors and mount fails
[ 1461.988701] run fstests generic/613 at 2020-10-27 19:57:34
[ 1530.406645] ------------[ cut here ]------------
[ 1530.407332] would truncate bmap result
[ 1530.408956] WARNING: CPU: 0 PID: 6401 at fs/iomap/fiemap.c:116
iomap_bmap_actor+0x43/0x50
[ 1530.410607] Modules linked in:
[ 1530.411024] CPU: 0 PID: 6401 Comm: mount Tainted: G W
<...>
1530.511978] jbd2_journal_init_inode: Cannot locate journal superblock
[ 1530.513310] EXT4-fs (dm-1): Could not load journal inode
Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxx>
---
common/rc | 10 +++++++
tests/generic/618 | 70 +++++++++++++++++++++++++++++++++++++++++++
tests/generic/618.out | 3 ++
tests/generic/group | 1 +
4 files changed, 84 insertions(+)
create mode 100755 tests/generic/618
create mode 100644 tests/generic/618.out
diff --git a/common/rc b/common/rc
index b5a504e0dcb4..128d75226958 100644
--- a/common/rc
+++ b/common/rc
@@ -1608,6 +1608,16 @@ _require_scratch_size()
[ $devsize -lt $1 ] && _notrun "scratch dev too small"
}
+# require a scratch dev of a minimum size (in kb) and should not be checked
+# post test
+_require_scratch_size_nocheck()
+{
+ [ $# -eq 1 ] || _fail "_require_scratch_size: expected size param"
+
+ _require_scratch_nocheck
+ local devsize=`_get_device_size $SCRATCH_DEV`
+ [ $devsize -lt $1 ] && _notrun "scratch dev too small"
+}
# this test needs a test partition - check we're ok & mount it
#
diff --git a/tests/generic/618 b/tests/generic/618
new file mode 100755
index 000000000000..45c14da80c06
--- /dev/null
+++ b/tests/generic/618
@@ -0,0 +1,70 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2020 Christian Kujau. All Rights Reserved.
+# Copyright (c) 2020 Ritesh Harjani. All Rights Reserved.
+#
+# FS QA Test generic/618
+#
+# Since the test is not specific to ext4, hence adding it to generic.
+# Add this test to check for regression which was reported when ext4 bmap
+# aops was moved to use iomap APIs. jbd2 calls bmap() kernel function
+# from fs/inode.c which was failing since iomap_bmap() implementation earlier
+# returned 0 for block addr > INT_MAX.
+# This regression was fixed with following kernel commit [1]
+# commit b75dfde1212991b24b220c3995101c60a7b8ae74
+# ("fibmap: Warn and return an error in case of block > INT_MAX")
+# [1]: https://patchwork.ozlabs.org/patch/1279914
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ _dmhugedisk_cleanup
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/dmhugedisk
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# Modify as appropriate.
+_supported_fs generic
+_require_dmhugedisk
+_require_scratch_size_nocheck $((4 * 1024 * 1024)) #kB
+
+# For 1k bs with ext4, mkfs was failing due to size limitation and also it
+# becomes too slow when doing an mkfs on a huge sparse ext4 FS with 1k bs.
+# Hence on ext4 run only for 4K bs.
+if [ "$FSTYP" == "ext4" ]; then
+ _scratch_mkfs > /dev/null 2>&1
+ blksz=$(sudo debugfs -R stats $SCRATCH_DEV 2> /dev/null |grep "Block size" |cut -d ':' -f 2)
+ test $blksz -lt 4096 && _notrun "This test requires ext4 with minimum 4k bs"
+fi
+
+# 17TB dm huge-test-zer0 device
+# (in terms of 512 sectors)
+sectors=$((2*1024*1024*1024*17))
+chunk_size=128
+
+_dmhugedisk_init $sectors $chunk_size
+_mkfs_dev $DMHUGEDISK_DEV
+_mount $DMHUGEDISK_DEV $SCRATCH_MNT || _fail "mount failed for $DMHUGEDISK_DEV $SCRATCH_MNT"
+testfile=$SCRATCH_MNT/testfile-$seq
+
+$XFS_IO_PROG -fc "pwrite -S 0xaa 0 1m" -c "fsync" $testfile | _filter_xfs_io
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/618.out b/tests/generic/618.out
new file mode 100644
index 000000000000..b920fe4d907a
--- /dev/null
+++ b/tests/generic/618.out
@@ -0,0 +1,3 @@
+QA output created by 618
+wrote 1048576/1048576 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/generic/group b/tests/generic/group
index 94e860b8c380..39e3ffb224a9 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -620,3 +620,4 @@
615 auto rw
616 auto rw io_uring stress
617 auto rw io_uring stress
+618 auto mount quick
--
2.26.2
