On Tue 02-06-20 17:22:39, Konstantin Kharlamov wrote: > So, FTR, I found on kernelnewbies that in linux 5.7 ext4 migrated to > iomap. Out of curiousity I rerun the tests on 5.7. The problem is still > reproducible. > > On Fri, 2020-04-24 at 17:56 +0300, Konstantin Kharlamov wrote: > > * SSDs are used in testing, so random access is not a concern. But I > > tried the > > "steps to reproduce" with raw block device, and IOPS always holds > > 9k for me. > > * "Direct" IO is used to bypass file-system cache. > > * The issue is way less visible on XFS, so it looks specific to file > > systems. > > * The biggest difference I've seen is on 70% reads/30% writes > > workload. But for > > simplicity in "steps to reproduce" I'm using 100% write. > > * it seems over time (perhaps a day) performance gets improved, so > > for best > > results when testing that you need to re-create ext4 anew. > > * in "steps to reproduce" I grep fio stdout. That suppresses > > interactive > > output. Interactive output may be interesting though, I've often > > seen workload > > drops to 600-700 IOPS while average was 5-6k > > * Original problem I worked with > > https://github.com/openzfs/zfs/issues/10231 > > > > # Steps to reproduce (in terms of terminal commands) > > > > $ cat fio_jobfile > > [job-section] > > name=temp-fio > > bs=8k > > ioengine=libaio > > rw=randrw > > rwmixread=0 > > rwmixwrite=100 > > filename=/mnt/test/file1 > > iodepth=1 > > numjobs=1 > > group_reporting > > time_based > > runtime=1m > > direct=1 > > filesize=4G > > $ mkfs.ext4 /dev/sdw1 > > $ mount /dev/sdw1 /mnt/test > > $ truncate -s 100G /mnt/test/file1 > > $ fio fio_jobfile | grep -i IOPS > > write: IOPS=12.5k, BW=97.0MiB/s (103MB/s)(5879MiB/60001msec) > > iops : min=10966, max=14730, avg=12524.20, > > stdev=1240.27, samples=119 > > $ sed -i 's/4G/100G/' fio_jobfile > > $ fio fio_jobfile | grep -i IOPS > > write: IOPS=5880, BW=45.9MiB/s (48.2MB/s)(2756MiB/60001msec) > > iops : min= 4084, max= 6976, avg=5879.31, > > stdev=567.58, samples=119 > > > > ## Expected > > > > Performance should be more or less the same > > > > ## Actual > > > > The second test is twice as slow > > > > # Versions > > > > * Kernel version: 5.6.2-050602-generic > > > > It seems however that the problem is present at least in 4.19 and > > 5.4. as well, so not a regression. Thanks for report! I've found this when going through some old email... I'm not quite sure what the problem is - do you expect that random writes in 4G file will be as fast as random writes to 100G file? Note that the way you setup the file, fio will not actually preallocate space for the file so fio will end up allocating blocks for the file in random order during benchmarking. Which is stress-testing the block allocator and extent tree manipulation. Furthermore doing this on 4G range is certainly cheaper than on 100G range (since once the block is allocated, the second write to that block is cheap) so I'm not surprised by the results much... Honza -- Jan Kara <jack@xxxxxxxx> SUSE Labs, CR
