On Sun, Jul 26, 2020 at 11:02:08PM +0800, Eryu Guan wrote:
> [cc ext4 list for ext4 specific test]
>
> On Fri, Jul 17, 2020 at 12:55:44PM +0200, Lukas Czerner wrote:
> > We should never be able to mount ext4 file system read-write with
> > read-only external journal device. Test it.
> >
> > The test was based on generic/050.
> >
> > Signed-off-by: Lukas Czerner <lczerner@xxxxxxxxxx>
>
> Is there a patch or kernel commit that fixes this test failure? I'd be
> better to mention the patch in either commit log or test description, so
> others could know where is the fix easily.
>
> > ---
> > tests/ext4/309 | 135 +++++++++++++++++++++++++++++++++++++++++++++
> > tests/ext4/309.out | 32 +++++++++++
>
> And use next available seq slot under ext4 dir, use
> "./tools/nextid ext4" to get the next available slot, which is 002 at
> this point.
>
> > tests/ext4/group | 1 +
> > 3 files changed, 168 insertions(+)
> > create mode 100755 tests/ext4/309
> > create mode 100644 tests/ext4/309.out
> >
> > diff --git a/tests/ext4/309 b/tests/ext4/309
> > new file mode 100755
> > index 00000000..356044c4
> > --- /dev/null
> > +++ b/tests/ext4/309
> > @@ -0,0 +1,135 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2009 Christoph Hellwig.
> > +# Copyright (c) 2020 Lukas Czerner.
> > +#
> > +# FS QA Test No. 309
> > +#
> > +# Copied from tests generic/050 and adjusted to support testing
> > +# read-only external journal device on ext4.
> > +#
> > +# Check out various mount/remount/unmount scenarious on a read-only
> > +# logdev blockdev.
> > +#
> > +seqfull=$0
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + blockdev --setrw $SCRATCH_LOGDEV
>
> Do 'blockdev --setrw $SCRATCH_DEV' here as well to make sure both LOGDEV
> and SCRATCH_DEV are set back to rw mode.
>
> > +}
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# real QA test starts here
> > +_supported_fs generic
>
> _supported_fs ext4
>
> Otherwise looks fine to me.
Thans Eryu,
I'll resend with the changes you pointed out.
-Lukas
>
> Thanks,
> Eryu
>
> > +_supported_os Linux
> > +
> > +_require_scratch_nocheck
> > +_require_scratch_shutdown
> > +_require_logdev
> > +_require_local_device $SCRATCH_DEV
> > +_require_local_device $SCRATCH_LOGDEV
> > +_require_norecovery
> > +
> > +_scratch_mkfs >/dev/null 2>&1
> > +_require_metadata_journaling $SCRATCH_DEV
> > +
> > +#
> > +# Mark the log device read-only
> > +#
> > +echo "setting log device read-only"
> > +blockdev --setro $SCRATCH_LOGDEV
> > +
> > +#
> > +# Mount it, and make sure we can't write to it, and we can unmount it again
> > +#
> > +echo "mounting with read-only log device:"
> > +_try_scratch_mount 2>&1 | _filter_ro_mount | _filter_scratch
> > +if [ "${PIPESTATUS[0]}" -eq 0 ]; then
> > + echo "touching file on read-only filesystem (should fail)"
> > + touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
> > +fi
> > +
> > +echo "unmounting read-only filesystem"
> > +_scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
> > +
> > +echo "setting log device read-write"
> > +blockdev --setrw $SCRATCH_LOGDEV
> > +
> > +echo "mounting with read-write log device:"
> > +_try_scratch_mount 2>&1 | _filter_scratch
> > +
> > +echo "touch files"
> > +touch $SCRATCH_MNT/{0,1,2,3,4,5,6,7,8,9}{0,1,2,3,4,5,6,7,8,9}
> > +
> > +echo "going down:"
> > +_scratch_shutdown -f
> > +
> > +echo "unmounting shutdown filesystem:"
> > +_scratch_unmount 2>&1 | _filter_scratch
> > +
> > +echo "setting log device read-only"
> > +blockdev --setro $SCRATCH_LOGDEV
> > +
> > +#
> > +# Mounting a filesystem that requires log-recovery fails even with
> > +# -o norecovery unless the fs device is read only or it's mounted
> > +# read only
> > +#
> > +echo "mounting filesystem that needs recovery with a read-only log device:"
> > +_try_scratch_mount 2>&1 | _filter_ro_mount | _filter_scratch
> > +
> > +echo "unmounting read-only filesystem"
> > +_scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
> > +
> > +
> > +echo "mounting filesystem with -o norecovery with a read-only log device:"
> > +_try_scratch_mount -o norecovery 2>&1 | _filter_ro_mount | _filter_scratch
> > +echo "unmounting read-only filesystem"
> > +_scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
> > +
> > +#
> > +# This is the way out if the log device really is read-only.
> > +# Doesn't mean it's a good idea in practice, more a last resort
> > +# data recovery hack. Either the underlying fs device needs
> > +# to be read only as well, or we mount the file system read only
> > +#
> > +echo "setting fs device read-only"
> > +blockdev --setro $SCRATCH_DEV
> > +echo "mounting filesystem with -o norecovery with a read-only fs and log device:"
> > +_try_scratch_mount -o norecovery 2>&1 | _filter_ro_mount | _filter_scratch
> > +echo "unmounting read-only filesystem"
> > +_scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
> > +echo "setting fs device read-write"
> > +blockdev --setrw $SCRATCH_DEV
> > +
> > +echo "mounting filesystem with -o norecovery,ro with a read-only log device:"
> > +_try_scratch_mount -o norecovery,ro 2>&1 | _filter_ro_mount | _filter_scratch
> > +echo "unmounting read-only filesystem"
> > +_scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
> > +
> > +echo "setting log device read-write"
> > +blockdev --setrw $SCRATCH_LOGDEV
> > +
> > +#
> > +# But log recovery is performed when mount with -o ro as long as
> > +# the underlying device is not write protected.
> > +#
> > +echo "mounting filesystem that needs recovery with -o ro:"
> > +_try_scratch_mount -o ro 2>&1 | _filter_scratch
> > +
> > +# success, all done
> > +echo "*** done"
> > +rm -f $seqres.full
> > +status=0
> > diff --git a/tests/ext4/309.out b/tests/ext4/309.out
> > new file mode 100644
> > index 00000000..4b7e136a
> > --- /dev/null
> > +++ b/tests/ext4/309.out
> > @@ -0,0 +1,32 @@
> > +QA output created by 309
> > +setting log device read-only
> > +mounting with read-only log device:
> > +mount: device write-protected, mounting read-only
> > +touching file on read-only filesystem (should fail)
> > +touch: cannot touch 'SCRATCH_MNT/foo': Read-only file system
> > +unmounting read-only filesystem
> > +setting log device read-write
> > +mounting with read-write log device:
> > +touch files
> > +going down:
> > +unmounting shutdown filesystem:
> > +setting log device read-only
> > +mounting filesystem that needs recovery with a read-only log device:
> > +mount: device write-protected, mounting read-only
> > +mount: cannot mount device read-only
> > +unmounting read-only filesystem
> > +umount: SCRATCH_DEV: not mounted
> > +mounting filesystem with -o norecovery with a read-only log device:
> > +mount: SCRATCH_MNT: wrong fs type, bad option, bad superblock on SCRATCH_DEV, missing codepage or helper program, or other error
> > +unmounting read-only filesystem
> > +umount: SCRATCH_DEV: not mounted
> > +setting fs device read-only
> > +mounting filesystem with -o norecovery with a read-only fs and log device:
> > +mount: device write-protected, mounting read-only
> > +unmounting read-only filesystem
> > +setting fs device read-write
> > +mounting filesystem with -o norecovery,ro with a read-only log device:
> > +unmounting read-only filesystem
> > +setting log device read-write
> > +mounting filesystem that needs recovery with -o ro:
> > +*** done
> > diff --git a/tests/ext4/group b/tests/ext4/group
> > index a1adc553..5e80e480 100644
> > --- a/tests/ext4/group
> > +++ b/tests/ext4/group
> > @@ -56,3 +56,4 @@
> > 306 auto rw resize quick
> > 307 auto ioctl rw defrag
> > 308 auto ioctl rw prealloc quick defrag
> > +309 shutdown mount auto quick
> > --
> > 2.21.3
>
