https://bugzilla.kernel.org/show_bug.cgi?id=207367 --- Comment #7 from riteshh@xxxxxxxxxxxxx --- Hello, On 4/21/20 10:38 AM, Dave Chinner wrote: > On Tue, Apr 21, 2020 at 09:50:38AM +0530, Ritesh Harjani wrote: >> Hello All, >> >> On 4/21/20 5:21 AM, bugzilla-daemon@xxxxxxxxxxxxxxxxxxx wrote: >>> https://bugzilla.kernel.org/show_bug.cgi?id=207367 >>> >>> --- Comment #3 from Christian Kujau (lists@xxxxxxxxxxxxxxx) --- >>> On Mon, 20 Apr 2020, bugzilla-daemon@xxxxxxxxxxxxxxxxxxx wrote: >>>> with kernel 5.7 only volumes under 16TB can be mount. >>> >>> While this bug report is still missing details, I was able to reproduce >>> this issue. Contrary to the subject line, it is not hardware related at >>> all. >>> >>> Linux 5.5 (Debian), creating a 17 TB sparse device (4 GB backing device): >>> >>> $ echo "0 36507222016 zero" | dmsetup create zero0 >>> $ echo "0 36507222016 snapshot /dev/mapper/zero0 /dev/vdb p 128" | \ >>> dmsetup create sparse0 >>> >>> $ mkfs.ext4 -F /dev/mapper/sparse0 >>> Creating filesystem with 4563402752 4k blocks and 285212672 inodes >>> Creating journal (262144 blocks): done >>> >>> $ mount -t ext4 /dev/mapper/sparse0 /mnt/disk/ >>> $ df -h /mnt/disk/ >>> Filesystem Size Used Avail Use% Mounted on >>> /dev/mapper/sparse0 17T 24K 17T 1% /mnt/disk >>> >>> >>> The same fails on 5.7-rc2 (vanilla) with: >>> >>> >>> ------------[ cut here ]------------ >>> would truncate bmap result >>> WARNING: CPU: 0 PID: 640 at fs/iomap/fiemap.c:121 >>> iomap_bmap_actor+0x3a/0x40 >> >> Sorry about not seeing this through in the first place. >> >> So the problem really is that the iomap_bmap() API >> gives WARNING and does't return the physical block address in case >> if the addr is > INT_MAX. (I guess this could be mostly since >> the ioctl_fibmap() passes a user integer pointer and users of >> iomap_bmap() may mostly be coming from ioctl path till now). > > No, it's because bmap is fundamentally broken when it comes to block > ranges > INT_MAX. The filesystem in question is a >16TB filesystem, > so the block range for that filesystem is >32bits, and hence usage > of bmap in the jbd2 code is broken. IIUC, what you meant is that bmap in general as a interface is broken because if some user tries to call this interface via an ioctl for a file which is placed beyond 32 bits on a filesystem, then it truncates the results (basically gives us wrong results). Also this means as a user interface this was not designed properly keeping the block addresses range in mind (that someday it will extent beyong 32 bits). Due to above reason, we don't make iomap_bmap() API return the u64 addr in it's argument, even though it is capable of doing that. Is that the reason? And this is because since the overall interface from userspace side is broken and so we want to get rid of that. So what I would still like to understand is- that bmap() internal kernel function can definitely handle the sector_t block addresses, right? Isn't the bmap() kernel function was designed for this purpose in mind, to help internal kernel callers to provide with u64 block addresses? But for e.g. here, when jbd2 calls for bmap(), it will eventually call for ext4_bmap() -> iomap_bmap(). Now even though this chain is capable of handling u64 addresses, but it's the iomap_bmap() which doesn't provide this. So the question simply is why? Sorry about my query here, it is to only to understand more about this and to not force in anyway to change iomap_bmap() to just get this working. > > Basically, jbd2 needs fixing to be able to map blocks that are at > higher offsets than bmap can actually report. > >> FYI - I do see that bmap() is also used by below APIs/subsystem. >> Not sure if any of subsystems mentioned below may still fail later >> if the underlying FS moved to iomap_bmap() interface or for >> any existing callers of iomap_bmap() :- >> >> 1. mm/page-io.c (generic_swapfile_activate() func) > > Filesystems using iomap infrastructure should be providing > aops->swap_activate() to map swapfile extents via > iomap_swapfile_activate() (e.g. see xfs_iomap_swapfile_activate()), > not using generic_swapfile_activate(). > >> 2. fs/cachefiles/rdwr.c > > Known problem, work being done to stop using bmap() here > >> 3. fs/ecryptfs/mmap.c > > Just a wrapper to pass ->bmap calls through to the lower layer. > >> 4. fs/jbd2/journal.c > > Broken on filesystems where the journal file might be placed beyond > a 32 bit block number, iomap_bmap() just makes that obvious. Needs > fixing. > > You also missed f2fs copy-n-waste using it for internal swapfile > mapping: > > /* Copied from generic_swapfile_activate() to check any holes */ > > That needs fixing, too. > > And you missed the MD bitmap code uses bmap() to map it's bitmap > storage file, which means that is broken is the bitmap file is on a > filesystem/block device > 16TB, too... > >> But the changes done in ext4 to move to iomap_bmap() interface >> resulted in this issue since jbd2 tries to find the block mapping >> of on disk journal inode of ext4 and on a larger filesystem >> this may fail given the design of iomap_bmap() to not >> return addr if > INT_MAX. >> >> So as I see it there are 3 options from here. Wanted to put this >> on mailing list for discussion. >> >> 1. Make changes in iomap_bmap() to return the block address mapping. >> But I still would like to mention that iomap designers may not agree >> with this here Since the direction in general is to get rid of bmap() >> interface anyways. > > Nope. bmap() is broken. Get rid of it. > >> 2. Revert the patch series of "bmap & fiemap to move to iomap interface" >> (why fiemap too? - since if we decide to revert bmap anyways, >> then we better fix the performance numbers report too coming from >> fiemap. Also due to 3rd option below since if iomap_bmap() is >> not changed, then we better keep both of this interface as is until >> we get the solution like 3 below.) > > The use of bmap was broken prior to this conversion - shooting > the messenger doesn't fix the problem. Get rid of bmap(). > >> 3. To move to a new internal API like fiemap. But we need to change >> fiemap in a way that it should also be allowed to used by internal >> kernel APIs. Since as of now fiemap_extent struct is assumed to be >> a user pointer. > > Fiemap cannot be used this way. It's a diagnostic interface that Sure. > provides no guarantee of coherency or atomicity, so you can't use it > in this way in userspace or the kernel. hmm. Yes, I guess even with FIEMAP_FLAG_SYNC what it mostly could provide is to make sure the dirty data goes and sit on disk. But I guess it won't provide guarantee that in case if the data is journalled then it is moved to it's right location on disk before the results are returned to user. So I understood the coherency part. But why do you say atomicity? How does bmap() interface provides atomicity() ? > > IMO, the correct thing to do is for the caller to supply jbd with a > block mapping callback. i.e. jbd2_journal_init_inode() gets called > from both ext4 and ocfs2 with a callback that does the block mapping > for that specific filesystem. Indeed, jbd2 will need to cache that > callback, because it needs to call it to map journal blocks when > committing transactions.... Sure thanks for this. Somehow I feel that the callback will be a similar API to what a_ops->bmap() does today. So from jbd2 perspective will the new block mapping callback needs same level of coherency and atomicity guarantee? Thanks -ritesh -- You are receiving this mail because: You are watching the assignee of the bug.
