On 4/20/20 8:27 AM, Murphy Zhou wrote:
On Sun, Apr 19, 2020 at 09:49:27PM +0530, Ritesh Harjani wrote:
Hello Ted,
On 4/19/20 10:16 AM, Theodore Y. Ts'o wrote:
ext4_map_block() is returning EFSCORRUPTED when lblk is
EXT4_MAX_LOGICAL_BLOCK, which is why he's constraining lblk to
EXT4_MAX_LOGICAL_BLOCK. I haven't looked into this more closely yet,
Yes, I did mention about this case in point 2 in below link though.
But maybe I was only focused on testing syzcaller reproducer, so
couldn't test this reported case.
https://www.spinics.net/lists/linux-ext4/msg71387.html
On Sun, Apr 19, 2020 at 12:42:24AM -0400, Theodore Y. Ts'o wrote:
I think we need to take his patch, and make a simialr change to
ext4_iomap_begin(). Ritesh, do you agree?
For example...
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 2a4aae6acdcb..adce3339d697 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3424,8 +3424,10 @@ static int ext4_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
int ret;
struct ext4_map_blocks map;
u8 blkbits = inode->i_blkbits;
+ ext4_lblk_t lblk = offset >> blkbits;
+ ext4_lblk_t last_lblk = (offset + length - 1) >> blkbits;
Why play with last_lblk but?
- if ((offset >> blkbits) > EXT4_MAX_LOGICAL_BLOCK)
+ if (lblk > EXT4_MAX_LOGICAL_BLOCK)
return -EINVAL;
if (WARN_ON_ONCE(ext4_has_inline_data(inode)))
@@ -3434,9 +3436,15 @@ static int ext4_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
/*
* Calculate the first and last logical blocks respectively.
*/
- map.m_lblk = offset >> blkbits;
- map.m_len = min_t(loff_t, (offset + length - 1) >> blkbits,
- EXT4_MAX_LOGICAL_BLOCK) - map.m_lblk + 1;
+ if (last_lblk >= EXT4_MAX_LOGICAL_BLOCK)
+ last_lblk = EXT4_MAX_LOGICAL_BLOCK - 1;
+ if (lblk >= EXT4_MAX_LOGICAL_BLOCK)
+ lblk = EXT4_MAX_LOGICAL_BLOCK - 1;
+
+ map.m_lblk = lblk;
+ map.m_len = last_lblk - lblk + 1;
+ if (map.m_len == 0 )
+ map.m_len = 1;
Not sure but with above changes map.m_len will never be
0. Right?
Yes. If it's 0, in ext4_iomap_is_delalloc we will get an "end" that
is less then m_lblk, causing another WARN in ext4_es_find_extent_range.
Sorry lost you. Ok so what I meant above is.
With your changes made in above code to truncate last_lblk
and lblk, we may never end up in a situation where map.m_len will be 0.
So the below check in your code, isn't it redundant?
I wanted to double confirm this with you.
+ if (map.m_len == 0 )
+ map.m_len = 1;
Ok, so the problem mainly is coming since ext4_map_blocks()
is returning -EFSCORRUPTED in case if lblk >= EXT4_MAX_LOGICAL_BLOCK.
So why change last_lblk?
I guess because we need to make sure a sane length value. In the loop
in iomap_fiemap, start and length are not checked, assuming be checked
by caller. If length get overflowed, the start value for the next loop
can also be affected, which makes lblk last_lblk and m_len to go crazy.
Sorry I didn't it explain it right maybe. So if we are anyway changing
lblk by truncating it and making sure map.m_len is not getting
overflowed (as we did in my previous patch), then we need not play with
last_lblk anyways.
And FWIW, instead of truncating lblk just so that ext4_map_blocks()
doesn't WARN, we can as well just return -ENOENT for
lblk >= EXT4_MAX_LOGICAL_BLOCK. ENOENT makes more sense to me,
but please feel free to correct me here.
Thoughts?
Meanwhile, I will also play this change (-ENOENT) a bit to at least get
few of the known test cases covered.
Also I do had this question for ext4.
EXT4_MAX_BLOCKS explaination says that's the max *number* of logical
blocks in a file. So since it is the number of blocks, it is equivalent
of length. Whereas the EXT4_MAX_LOGICAL_BLOCK says the max logical block
of a file, which is equivalent of offset.
Considering the logical offset starts from 0, so as Ted was saying
having both values same doesn't make sense. Ideally maybe
EXT4_MAX_LOGICAL_BLOCK should be 0xFFFFFFFFE.
But that may also require some careful checking of all bounds of length
and offset across the code. So maybe we can revisit this later.
/*
* Maximum number of logical blocks in a file; ext4_extent's ee_block is
* __le32.
*/
#define EXT_MAX_BLOCKS 0xffffffff
/* Max logical block we can support */
#define EXT4_MAX_LOGICAL_BLOCK 0xFFFFFFFF
-ritesh
Thanks.
Shouldn't we just change the logic to return -ENOENT in case
if (lblk >= EXT4_MAX_LOGICAL_BLOCK)? ENOENT can be handled by
IOMAP APIs to abort the loop properly.
This along with the map.m_len overlflow patch which I had submitted
before. (since the overflow patch is anyway a valid fix which we anyways
need).
-ritesh
if (flags & IOMAP_WRITE)
ret = ext4_iomap_alloc(inode, &map, flags);
@@ -3524,8 +3532,10 @@ static int ext4_iomap_begin_report(struct inode *inode, loff_t offset,
bool delalloc = false;
struct ext4_map_blocks map;
u8 blkbits = inode->i_blkbits;
+ ext4_lblk_t lblk = offset >> blkbits;
+ ext4_lblk_t last_lblk = (offset + length - 1) >> blkbits;
- if ((offset >> blkbits) > EXT4_MAX_LOGICAL_BLOCK)
+ if (lblk > EXT4_MAX_LOGICAL_BLOCK)
return -EINVAL;
if (ext4_has_inline_data(inode)) {
@@ -3540,9 +3550,15 @@ static int ext4_iomap_begin_report(struct inode *inode, loff_t offset,
/*
* Calculate the first and last logical block respectively.
*/
- map.m_lblk = offset >> blkbits;
- map.m_len = min_t(loff_t, (offset + length - 1) >> blkbits,
- EXT4_MAX_LOGICAL_BLOCK) - map.m_lblk + 1;
+ if (last_lblk >= EXT4_MAX_LOGICAL_BLOCK)
+ last_lblk = EXT4_MAX_LOGICAL_BLOCK - 1;
+ if (lblk >= EXT4_MAX_LOGICAL_BLOCK)
+ lblk = EXT4_MAX_LOGICAL_BLOCK - 1;
+
+ map.m_lblk = lblk;
+ map.m_len = last_lblk - lblk + 1;
+ if (map.m_len == 0 )
+ map.m_len = 1;
/*
* Fiemap callers may call for offset beyond s_bitmap_maxbytes.
