Hi,
I've got an 85TB ext4 filesystem which I'm unable to fsck. The only
cases of same error I could find was from what I can find due to an SD
card "swallowing" writes (ie, the card goes into a read-only mode but
doesn't report write failure).
crowsnest ~ # e2fsck -f /dev/lvm/home
e2fsck 1.45.4 (23-Sep-2019)
ext2fs_check_desc: Corrupt group descriptor: bad block for block bitmap
e2fsck: Group descriptors look bad... trying backup blocks...
/dev/lvm/home: recovering journal
e2fsck: unable to set superblock flags on /dev/lvm/home
/dev/lvm/home: ***** FILE SYSTEM WAS MODIFIED *****
/dev/lvm/home: ********** WARNING: Filesystem still has errors **********
I have also (using dumpe2fs) obtained the location of the backup super
blocks and tried same against a few other superblocks using -b. -y (as
per suggestion from at least one post) make absolutely no difference,
our understanding is that this simply answers yes to all questions, so
we didn't expect this to have impact but decided it was worth a try anyway.
Looking at the code for the unable to set superblock error it looks like
the code is in e2fsck/unix.c, specifically this:
1765 if (ext2fs_has_feature_journal_needs_recovery(sb)) {
1766 if (ctx->options & E2F_OPT_READONLY) {
...
1771 } else {
1772 if (ctx->flags & E2F_FLAG_RESTARTED) {
1773 /*
1774 * Whoops, we attempted to run the
1775 * journal twice. This should never
1776 * happen, unless the hardware or
1777 * device driver is being bogus.
1778 */
1779 com_err(ctx->program_name, 0,
1780 _("unable to set superblock flags "
1781 "on %s\n"), ctx->device_name);
1782 fatal_error(ctx, 0);
1783 }
That comment has me somewhat confused. I'm assuming the implication
there is that e2fsck tried to update the superblock, but after reading
it back, it's either unchanged or still wrong (In line with the
description of the SD card I found online). None of our arrays are
reflecting R/O in /proc/mdstat. We did pick out this in kernel bootup
(we downgraded back to 5.1.15, which we're on currently, after
experiencing major performance issues on 5.3.6 and subsequently 5.4.8
didn't seem to fix those, and the 4.14.13 kernel that was used
previously is known to cause ext4 corruption of the kind we saw on the
other filesystems):
[ 3932.271538] EXT4-fs (dm-7): ext4_check_descriptors: Block bitmap for
group 404160 overlaps superblock
[ 3932.271539] EXT4-fs (dm-7): group descriptors corrupted!
I created a dumpe2fs file as well:
crowsnest ~ # dumpe2fs /dev/lvm/home > /var/tmp/dump2fs_home.txt
dumpe2fs 1.45.4 (23-Sep-2019)
dumpe2fs: Block bitmap checksum does not match bitmap while trying to
read '/dev/lvm/home' bitmaps
Available at https://downloads.uls.co.za/85T/dump2fs_home.txt.xz (1.2GB,
md5:79b3250e209c067af2532d5324ff95aa, around 12GB extracted)
A strace of e2fsck -y -f /dev/lvm/home at
https://downloads.uls.co.za/85T/fsck.strace.txt (13MB,
md5:60aa91b0c47dd2837260218eb774152d)
crowsnest ~ # tune2fs -l /dev/lvm/home
tune2fs 1.45.4 (23-Sep-2019)
Filesystem volume name: <none>
Last mounted on: /home
Filesystem UUID: 522a9faf-7992-4888-93d5-7fe49a9762d6
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal ext_attr filetype meta_bg extent
64bit flex_bg sparse_super large_file huge_file dir_nlink extra_isize
metadata_csum
Filesystem flags: signed_directory_hash
Default mount options: user_xattr acl
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 356515840
Block count: 22817013760
Reserved block count: 0
Free blocks: 6874204745
Free inodes: 202183498
First block: 0
Block size: 4096
Fragment size: 4096
Group descriptor size: 64
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 512
Inode blocks per group: 32
RAID stride: 128
RAID stripe width: 1024
First meta block group: 2048
Flex block group size: 16
Filesystem created: Thu Jul 26 12:19:07 2018
Last mount time: Sat Jan 18 18:58:50 2020
Last write time: Sun Jan 26 11:38:56 2020
Mount count: 2
Maximum mount count: -1
Last checked: Wed Oct 30 17:37:27 2019
Check interval: 0 (<none>)
Lifetime writes: 976 TB
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
First inode: 11
Inode size: 256
Required extra isize: 32
Desired extra isize: 32
Journal inode: 8
Default directory hash: half_md4
Directory Hash Seed: 876a7d14-bce8-4bef-9569-82e7d573b7aa
Journal backup: inode blocks
Checksum type: crc32c
Checksum: 0xfbd895e9
Infrastructure: 3 x RAID6 arrays, 2 of 12 x 4TB disks, and 1 of 4 x
10TB disks (100TB usable total). These are combined into a single VG
using LVM, and then carved up into a number of LVs, the largest of which
is this 85TB chunk. We have tried in the past to carve this into
smaller LVs but failed. So we're aware that this is very large and not
ideal.
We did experience an assembly issue on one of the underlying RAID6 PVs,
those have been resolved, and the disk that was giving issues has been
scrubbed and rebuilt. rom what we can tell based on other file systems,
this did not affect data integrity but we can't make that statement with
100% certainty, as such we are expecting some data loss here but it
would be better if we can recover at least some of this data.
Other filesystems which also resides on the same PV that was affected by
the RAID6 problem either received a clean bill of health, or were
successfully repaired by e2fsck (the system did crash however, it's
unclear whether the RAID6 assembly problem was the cause or merely
another consequence, and as a result, whether the corruption on the
repaired filesystem was a consequence of the kernel or the RAID).
I'm continuing onwards with e2fsck code to try and figure this out, am
hopeful though that someone could perhaps provide some much needed
insight and pointers for me.
Kind Regards,
Jaco
