Re: Linux 5.3-rc8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Linus Torvalds - 17.09.19, 20:01:23 CEST:
> > We can make boot hang in "sane", discoverable way.
> 
> That is certainly a huge advantage, yes. Right now I suspect that what
> has happened is that this has probably been going on as some
> low-level background noise for a while, and people either figured it
> out and switched away from gdm (example: Christoph), or more likely
> some unexplained boot problems that people just didn't chase down. So
> it took basically a random happenstance to make this a kernel issue.
> 
> But "easily discoverable" would be good.

Well I meanwhile remembered how it was with sddm:

Without CPU assistance (RDRAND) or haveged or any other source of
entropy, sddm would simply not appear and I'd see the tty1 login. Then
I start to type something and after a while sddm popped up. If I would
not type anything it took easily at least have a minute till it appeared.

Actually I used my system like this quite a while, cause I did not feel
comfortable with haveged and RDRAND.

AFAIR this was as this Debian still ran with Systemd. What Debian
maintainer for sddm did was this:

sddm (0.18.0-1) unstable; urgency=medium
[…]
  [ Maximiliano Curia ]
  * Workaround entropy starvation by recommending haveged
  * Release to unstable

 -- Maximiliano Curia […]  Sun, 22 Jul 2018 13:26:44 +0200

With Sysvinit I still have neither haveged nor RDRAND enabled, but
behavior changed a bit. crng init still takes a while

% zgrep -h "crng init" /var/log/kern.log*
Sep 16 09:06:23 merkaba kernel: [   16.910096][    C3] random: crng init done
Sep  8 14:08:39 merkaba kernel: [   16.682014][    C2] random: crng init done
Sep  9 09:16:43 merkaba kernel: [   46.084188][    C2] random: crng init done
Sep 11 10:52:37 merkaba kernel: [   47.209825][    C3] random: crng init done
Sep 12 08:32:08 merkaba kernel: [   76.624375][    C3] random: crng init done
Sep 12 20:07:29 merkaba kernel: [   10.726349][    C2] random: crng init done
Sep  8 10:02:42 merkaba kernel: [   37.391577][    C2] random: crng init done
Aug 26 09:23:51 merkaba kernel: [   40.555337][    C3] random: crng init done
Aug 28 09:45:28 merkaba kernel: [   39.446847][    C1] random: crng init done
Aug 20 10:14:59 merkaba kernel: [   12.242467][    C1] random: crng init done

and there might be a slight delay before sddm appears, before tty has been
initialized. I am not completely sure whether it is related to sddm or
something else. But AFAIR delays have been in the range of a maximum of
5-10 seconds, so I did not bother to check more closely.

Note this is on a ThinkPad T520 which is a PC. And if I read above kernel log
excerpts right, it can still take up to 76 second for crng to be initialized with
entropy. Would be interesting to see other people's numbers there.

There might be a different ordering with Sysvinit and it may still be sddm.
But I never have seen a delay of 76 seconds AFAIR… so something else
might be different or I just did not notice the delay. Sometimes I switch
on the laptop and do something else to come back in a minute or so.

I don't have any kernel logs old enough to see whether whether crng init
times have been different with Systemd due to asking for randomness for
UUID/hashmaps.

Thanks,
-- 
Martin





[Index of Archives]     [Reiser Filesystem Development]     [Ceph FS]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite National Park]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]     [Linux Media]

  Powered by Linux