On Sep 9, 2019, at 12:10 AM, Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx> wrote:
>
> Any suggestions to this patch? Though I also think this patch needs some
> more improvements and more performance tests :)
What we've done in the past is to increase the journal size until this is
no longer a problem. For metadata-intensive filesystems we use a journal
size of up to 4GB, and default to 1GB for data servers. One benefit of
this over forcing checkpoints is that it allows IO aggregation from the
dirty buffers before they are forced to disk, which reduces impact on the
foreground workload. However, it does use a lot of RAM.
> Currently I have two other thoughts:
> 1, add codes to count the number of transactions to be checkpointted, with
> this information, we can make some better decisions, for example, when it's
> appropriate to reclaim journal space asynchronously.
You can check some stats about transactions and checkpointing like:
$ cat /proc/fs/jbd2/dm-12-8/info
6490 transaction, each up to 8192 blocks
average:
0ms waiting for transaction
5227ms running transaction
0ms transaction was being locked
0ms flushing data (in ordered mode)
196ms logging transaction
134327us average transaction commit time
320 handles per transaction
18 blocks per transaction
19 logged blocks per transaction
In the situation you describe, where the journal is full, there should be
a non-zero "waiting for transaction".
If you are adding more stats (e.g. decaying average number of transactions
to be checkpointed), this is where it should go.
> 2, add a new mount option to control whether enable or disable this feature.
I think this is critical for any feature. It is useful both for testing
(e.g. does it improve/hurt performance), but also in case there are bugs
seen in the field then the feature can be turned off without having to
patch, build, and install a new kernel.
Rather than just enable/disable the feature, the tunable should be the
number of pending transactions before checkpoint is started, or number
of free journal blocks (percentage if < 100?) at which to start checkpoint.
>> In current jbd2's implemention, jbd2 won't reclaim journal space unless
>> free journal space is lower than specified threshold, see logic in
>> add_transaction_credits():
>> write_lock(&journal->j_state_lock);
>> if (jbd2_log_space_left(journal) < jbd2_space_needed(journal))
>> __jbd2_log_wait_for_space(journal);
>> write_unlock(&journal->j_state_lock);
>> Indeed with this logic, we can also have many transactions queued to be
>> checkpointd, which means these transactions still occupy jbd2 space.
>> Recently I have seen some disadvantages caused by this logic:
>> Some of our applications will get stuck in below stack periodically:
>> __jbd2_log_wait_for_space+0xd5/0x200 [jbd2]
>> start_this_handle+0x31b/0x8f0 [jbd2]
>> jbd2__journal_start+0xcd/0x1f0 [jbd2]
>> __ext4_journal_start_sb+0x69/0xe0 [ext4]
>> ext4_dirty_inode+0x32/0x70 [ext4]
>> __mark_inode_dirty+0x15f/0x3a0
>> generic_update_time+0x87/0xe0
>> file_update_time+0xbd/0x120
>> __generic_file_aio_write+0x198/0x3e0
>> generic_file_aio_write+0x5d/0xc0
>> ext4_file_write+0xb5/0x460 [ext4]
>> do_sync_write+0x8d/0xd0
>> vfs_write+0xbd/0x1e0
>> SyS_write+0x7f/0xe0
>> Meanwhile I found io usage in these applications' machines are relatively
>> low, journal space is somewhat like a global lock, in high concurrency case,
>> if many tasks contend for journal credits, they will easily hit above stack
>> and be stuck in waitting for free journal space, so I wonder whether we can
>> reclaim journal space asynchronously when free space is lower than a specified
>> threshold, to avoid that all applications are stalled at the same time.
>> I think this will be more useful in high speed store, journal space will be
>> reclaimed in background quickly, and applications will less likely to be
>> stucked by above issue. To improve this case, we use workqueue to queue a
>> work in background to reclaim journal space.
>> I also construct a test case to verify improvement, test case will create
>> 1000000 directories, use 1, 2, 4, 8 and 16 tasks per test round. For example,
>> in 8 tasks case, create 8 processes and every process creates 125000 directories,
>> 16 tasks case, every process creates 62500 directories. Every test case run
>> 5 iterations.
>> Tested in my vm(16cores, 8G memory), count the run time per test round.
>> Without this patch,
>> 16 tasks: 35s 34s 33s 34s 34s total: 170s, avg: 34s
>> 8 tasks: 33s 35s 34s 35s 35s total: 172s, avg: 34.4s
>> 4 tasks: 36s 38s 39s 39s 41s total: 193s, avg: 38.6s
>> 2 tasks: 53s 54s 52s 55s 54s total: 268s, avg: 53.6s
>> 1 tasks: 65s 65s 65s 65s 64s total: 324s, avg: 64.8s
>> With this patch:
>> 16 tasks: 29s 32s 32s 31s 33s total: 157s, avg: 31.4s
>> 8 tasks: 30s 31s 30s 31s 30s total: 152s, avg: 30.4s
>> 4 tasks: 33s 34s 32s 33s 37s total: 169s, avg: 33.8s
>> 2 tasks: 47s 48s 46s 49s 48s total: 238s, avg: 47.6s
>> 1 tasks: 56s 55s 56s 54s 55s total: 276s, avg: 55.2s
>> From above test, we can have 10% improvements.
>> Run same test in physical machine with nvme store, get such test results:
>> without patch(count the total time spending to create 5000000 sub-directories):
>> 64 tasks 32 tasks 16 tasks 8 tasks 4 tasks 2 tasks 1 tasks
>> 66s 64s 67s 71s 81s 108s 133s
>> with patch:
>> 64 tasks 32 tasks 16 tasks 8 tasks 4 tasks 2 tasks 1 tasks
>> 66s 64s 69s 72s 80s 103s 112s
>> Seems that improvements are only somewhat significant in low concurrency
>> case, I guess it's because that the checkpoint work in nvme is quick.
>> In high concurrency case, the overhead caused by waitting for log space
>> may not a big bottleneck, I'll look into this issue more.
>> Signed-off-by: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
>> ---
>> fs/jbd2/checkpoint.c | 4 ++--
>> fs/jbd2/journal.c | 26 ++++++++++++++++++++++++++
>> fs/jbd2/transaction.c | 12 +++++++++++-
>> include/linux/jbd2.h | 23 ++++++++++++++++++++++-
>> 4 files changed, 61 insertions(+), 4 deletions(-)
>> diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
>> index a1909066bde6..da0920cbc1d3 100644
>> --- a/fs/jbd2/checkpoint.c
>> +++ b/fs/jbd2/checkpoint.c
>> @@ -105,12 +105,12 @@ static int __try_to_free_cp_buf(struct journal_head *jh)
>> * Called under j-state_lock *only*. It will be unlocked if we have to wait
>> * for a checkpoint to free up some space in the log.
>> */
>> -void __jbd2_log_wait_for_space(journal_t *journal)
>> +void __jbd2_log_wait_for_space(journal_t *journal, int scale)
>> {
>> int nblocks, space_left;
>> /* assert_spin_locked(&journal->j_state_lock); */
>> - nblocks = jbd2_space_needed(journal);
>> + nblocks = jbd2_space_needed(journal) * scale;
>> while (jbd2_log_space_left(journal) < nblocks) {
>> write_unlock(&journal->j_state_lock);
>> mutex_lock_io(&journal->j_checkpoint_mutex);
>> diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
>> index 953990eb70a9..871c3d251fdb 100644
>> --- a/fs/jbd2/journal.c
>> +++ b/fs/jbd2/journal.c
>> @@ -1100,6 +1100,21 @@ static void jbd2_stats_proc_exit(journal_t *journal)
>> remove_proc_entry(journal->j_devname, proc_jbd2_stats);
>> }
>> +/*
>> + * Start to reclaim journal space asynchronously.
>> + */
>> +void jbd2_reclaim_log_space_async(struct work_struct *work)
>> +{
>> + journal_t *journal = container_of(work, journal_t, j_reclaim_work);
>> +
>> + write_lock(&journal->j_state_lock);
>> + /* See comments in add_transaction_credits() */
>> + if (jbd2_log_space_left(journal) < jbd2_space_needed(journal) * 2)
>> + __jbd2_log_wait_for_space(journal, 2);
>> + journal->j_async_reclaim_run = 0;
>> + write_unlock(&journal->j_state_lock);
>> +}
>> +
>> /*
>> * Management for journal control blocks: functions to create and
>> * destroy journal_t structures, and to initialise and read existing
>> @@ -1142,6 +1157,15 @@ static journal_t *journal_init_common(struct block_device *bdev,
>> /* The journal is marked for error until we succeed with recovery! */
>> journal->j_flags = JBD2_ABORT;
>> + journal->j_reclaim_wq = alloc_workqueue("jbd2-reclaim-wq",
>> + WQ_MEM_RECLAIM | WQ_UNBOUND, 1);
>> + if (!journal->j_reclaim_wq) {
>> + pr_err("%s: failed to create workqueue\n", __func__);
>> + goto err_cleanup;
>> + }
>> + INIT_WORK(&journal->j_reclaim_work, jbd2_reclaim_log_space_async);
>> + journal->j_async_reclaim_run = 0;
>> +
>> /* Set up a default-sized revoke table for the new mount. */
>> err = jbd2_journal_init_revoke(journal, JOURNAL_REVOKE_DEFAULT_HASH);
>> if (err)
>> @@ -1718,6 +1742,7 @@ int jbd2_journal_destroy(journal_t *journal)
>> if (journal->j_running_transaction)
>> jbd2_journal_commit_transaction(journal);
>> + flush_workqueue(journal->j_reclaim_wq);
>> /* Force any old transactions to disk */
>> /* Totally anal locking here... */
>> @@ -1768,6 +1793,7 @@ int jbd2_journal_destroy(journal_t *journal)
>> jbd2_journal_destroy_revoke(journal);
>> if (journal->j_chksum_driver)
>> crypto_free_shash(journal->j_chksum_driver);
>> + destroy_workqueue(journal->j_reclaim_wq);
>> kfree(journal->j_wbuf);
>> kfree(journal);
>> diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
>> index 990e7b5062e7..27f9d47c620e 100644
>> --- a/fs/jbd2/transaction.c
>> +++ b/fs/jbd2/transaction.c
>> @@ -247,6 +247,16 @@ static int add_transaction_credits(journal_t *journal, int blocks,
>> return 1;
>> }
>> + /*
>> + * If free journal space is lower than (jbd2_space_needed(journal) * 2),
>> + * let's reclaim some journal space early and do it asynchronously.
>> + */
>> + if (journal->j_async_reclaim_run == 0 &&
>> + jbd2_log_space_left(journal) < (jbd2_space_needed(journal) * 2)) {
>> + journal->j_async_reclaim_run = 1;
>> + queue_work(journal->j_reclaim_wq, &journal->j_reclaim_work);
>> + }
>> +
>> /*
>> * The commit code assumes that it can get enough log space
>> * without forcing a checkpoint. This is *critical* for
>> @@ -264,7 +274,7 @@ static int add_transaction_credits(journal_t *journal, int blocks,
>> jbd2_might_wait_for_commit(journal);
>> write_lock(&journal->j_state_lock);
>> if (jbd2_log_space_left(journal) < jbd2_space_needed(journal))
>> - __jbd2_log_wait_for_space(journal);
>> + __jbd2_log_wait_for_space(journal, 1);
>> write_unlock(&journal->j_state_lock);
>> return 1;
>> }
>> diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
>> index df03825ad1a1..acc93597271b 100644
>> --- a/include/linux/jbd2.h
>> +++ b/include/linux/jbd2.h
>> @@ -1152,6 +1152,27 @@ struct journal_s
>> */
>> __u32 j_csum_seed;
>> + /**
>> + * @j_async_reclaim_run:
>> + *
>> + * Is there a work running asynchronously to reclaim journal space.
>> + */
>> + int j_async_reclaim_run;
>> +
>> + /**
>> + * @j_reclaim_work:
>> + *
>> + * Work_struct to reclaim journal space.
>> + */
>> + struct work_struct j_reclaim_work;
>> +
>> + /**
>> + * @j_reclaim_wq:
>> + *
>> + * Workqueue for reclaim journal space asynchronously.
>> + */
>> + struct workqueue_struct *j_reclaim_wq;
>> +
>> #ifdef CONFIG_DEBUG_LOCK_ALLOC
>> /**
>> * @j_trans_commit_map:
>> @@ -1498,7 +1519,7 @@ int jbd2_complete_transaction(journal_t *journal, tid_t tid);
>> int jbd2_log_do_checkpoint(journal_t *journal);
>> int jbd2_trans_will_send_data_barrier(journal_t *journal, tid_t tid);
>> -void __jbd2_log_wait_for_space(journal_t *journal);
>> +void __jbd2_log_wait_for_space(journal_t *journal, int scale);
>> extern void __jbd2_journal_drop_transaction(journal_t *, transaction_t *);
>> extern int jbd2_cleanup_journal_tail(journal_t *);
>>
Cheers, Andreas
Attachment:
signature.asc
Description: Message signed with OpenPGP
