Re: [PATCH v2 12/12] docs: Add fast commit documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 15, 2019 at 6:00 PM Darrick J. Wong <darrick.wong@xxxxxxxxxx> wrote:
>
> On Thu, Aug 08, 2019 at 08:45:52PM -0700, Harshad Shirwadkar wrote:
> > This patch adds necessary documentation to
> > Documentation/filesystems/journalling.rst and
> > Documentation/filesystems/ext4/journal.rst.
> >
> > Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@xxxxxxxxx>
> > ---
> >  Documentation/filesystems/ext4/journal.rst | 96 ++++++++++++++++++++--
> >  Documentation/filesystems/journalling.rst  | 15 ++++
> >  2 files changed, 105 insertions(+), 6 deletions(-)
> >
> > diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst
> > index ea613ee701f5..d6e4a698e208 100644
> > --- a/Documentation/filesystems/ext4/journal.rst
> > +++ b/Documentation/filesystems/ext4/journal.rst
> > @@ -29,10 +29,14 @@ safest. If ``data=writeback``, dirty data blocks are not flushed to the
> >  disk before the metadata are written to disk through the journal.
> >
> >  The journal inode is typically inode 8. The first 68 bytes of the
> > -journal inode are replicated in the ext4 superblock. The journal itself
> > -is normal (but hidden) file within the filesystem. The file usually
> > -consumes an entire block group, though mke2fs tries to put it in the
> > -middle of the disk.
> > +journal inode are replicated in the ext4 superblock. The journal
> > +itself is normal (but hidden) file within the filesystem. The file
> > +usually consumes an entire block group, though mke2fs tries to put it
> > +in the middle of the disk. Last 128 blocks in the journal are reserved
> > +for fast commits. Fast commits store metadata changes to inodes in an
> > +incremental fashion. A fast commit is valid only if there is no full
> > +commit after that particular fast commit. That makes fast commit space
> > +reusable after every full commit.
> >
> >  All fields in jbd2 are written to disk in big-endian order. This is the
> >  opposite of ext4.
> > @@ -48,16 +52,18 @@ Layout
> >  Generally speaking, the journal has this format:
> >
> >  .. list-table::
> > -   :widths: 16 48 16
> > +   :widths: 16 48 16 18
> >     :header-rows: 1
> >
> >     * - Superblock
> >       - descriptor\_block (data\_blocks or revocation\_block) [more data or
> >         revocations] commmit\_block
> >       - [more transactions...]
> > +     - [Fast commits...]
> >     * -
> >       - One transaction
> >       -
> > +     -
> >
> >  Notice that a transaction begins with either a descriptor and some data,
> >  or a block revocation list. A finished transaction always ends with a
> > @@ -76,7 +82,7 @@ The journal superblock will be in the next full block after the
> >  superblock.
> >
> >  .. list-table::
> > -   :widths: 12 12 12 32 12
> > +   :widths: 12 12 12 32 12 12
> >     :header-rows: 1
> >
> >     * - 1024 bytes of padding
> > @@ -85,11 +91,13 @@ superblock.
> >       - descriptor\_block (data\_blocks or revocation\_block) [more data or
> >         revocations] commmit\_block
> >       - [more transactions...]
> > +     - [Fast commits...]
> >     * -
> >       -
> >       -
> >       - One transaction
> >       -
> > +     -
> >
> >  Block Header
> >  ~~~~~~~~~~~~
> > @@ -609,3 +617,79 @@ bytes long (but uses a full block):
> >       - h\_commit\_nsec
> >       - Nanoseconds component of the above timestamp.
> >
> > +Fast Commit Block
> > +~~~~~~~~~~~~~~~~~
> > +
> > +The fast commit block indicates an append to the last commit block
> > +that was written to the journal. One fast commit block records updates
> > +to one inode. So, typically you would find as many fast commit blocks
> > +as the number of inodes that got changed since the last commit. A fast
> > +commit block is valid only if there is no commit block present with
> > +transaction ID greater than that of the fast commit block. If such a
> > +block a present, then there is no need to replay the fast commit
> > +block.
> > +
> > +Multiple fast commit blocks are a part of one sub-transaction. To
> > +indicate the last block in a fast commit transaction, fc_flags field
> > +in the last block in every subtransaction is marked with "LAST" (0x1)
> > +flag. A subtransaction is valid only if all the following conditions
> > +are met:
> > +
> > +1) SUBTID of all blocks is either equal to or greater than SUBTID of
> > +   the previous fast commit block.
> > +2) For every sub-transaction, last block is marked with LAST flag.
> > +3) There are no invalid blocks in between.
> > +
> > +.. list-table::
> > +   :widths: 8 8 24 40
> > +   :header-rows: 1
> > +
> > +   * - Offset
> > +     - Type
> > +     - Name
> > +     - Descriptor
> > +   * - 0x0
> > +     - journal\_header\_s
> > +     - (open coded)
> > +     - Common block header.
> > +   * - 0xC
> > +     - \_\_le32
> > +     - fc\_magic
> > +     - Magic value which should be set to 0xE2540090. This identifies
> > +       that this block is a fast commit block.
> > +   * - 0x10
> > +     - \_\_le32
> > +     - fc\_subtid
> > +     - Sub-transaction ID for this commit block
> > +   * - 0x14
> > +     - \_\_u8
> > +     - fc\_features
> > +     - Features used by this fast commit block.
> > +   * - 0x15
> > +     - \_\_u8
> > +     - fc_flags
> > +     - Flags. (0x1(Last) - Indicates that this is the last block in sub-transaction)
> > +   * - 0x16
> > +     - \_\_le16
> > +     - fc_num_tlvs
> > +     - Number of TLVs contained in this fast commit block
> > +   * - 0x18
> > +     - \_\_le32
> > +     - \_\_fc\_len
> > +     - Length of the fast commit block in terms of number of blocks
> > +   * - 0x2c
> > +     - \_\_le32
> > +     - fc\_ino
> > +     - Inode number of the inode that will be recovered using this fast commit
> > +   * - 0x30
> > +     - struct ext4\_inode
> > +     - inode
> > +     - On-disk copy of the inode at the commit time
> > +   * - 0x34
> > +     - struct ext4\_fc\_tl
> > +     - Array of struct ext4\_fc\_tl
> > +     - The actual delta with the last commit. Starting at this offset,
> > +       there is an array of TLVs that indicates which all extents
> > +       should be present in the corresponding inode. Currently, the
> > +       only tag that is supported is EXT4\_FC\_TAG\_EXT. That tag
> > +       indicates that the corresponding value is an extent.
>
> This is a good start, but what's the structure of struct ext4_fc_tl ?
> It's written to disk, it should be here too.  Looks like it's mostly
> just an array of ondisk extent structures?
Thanks, I'll update this in next version. struct ext4_fc_tl is a
generic tag-length-value container that currently holds only extents
that were added to a file after last commit.
>
> So if I read this right, this first fastcommit tag type seems to be an
> inode core and an array of extents which ... I guess are the extents
> that were allocated and mapped into the file?  So therefore journal
> replay of this metadata update becomes a simple matter of logging the
> new inode core, adding the associated fc extent records to the extent
> map, and marking the corresponding parts of the block bitmap in use?
>
Yes, that's precisely what is done here.
> I'm wondering why these fast commits aren't written inline with the
> regular jbd2 transaction block stream?  i.e.
>
> [descriptors][blocks][commit][fastcommit][fastcommit][descriptor...]
>
After a full commit all previous fast commits are invalid. So, if we
inline fast commits with corresponding transactions, we'll end up
wasting a whole lot of journal space. So, fast commit area is kept
separate from the normal journaling area and after every transaction
commit, fast commit space is reused. But, if we could overwrite fast
commit blocks with the final commit then it's possible to inline fast
commit blocks with the transaction stream without losing journal
space. So, fast commit could just write a fast commit block after
previous transaction and when next transaction commits, it could
simply overwrite previous fast commit blocks.
> That way jbd2 replay just adds a case for a journal block with h_magic
> == JBD2_FC_MAGIC where it checkpoints whatever it had staged at that
> point, throws the fast commit block up to ext4 to do whatever, and then
> continues on replaying regular transactions?  I get this feeling like
> fastcommit is a journal that runs inside of/alongside jbd2 and wonder
> why not just integrate it better with jbd2?
Hmmm, I agree, we want fast commits to be as close to jbd2 as possible.
>
> > diff --git a/Documentation/filesystems/journalling.rst b/Documentation/filesystems/journalling.rst
> > index 58ce6b395206..2e0d550b546c 100644
> > --- a/Documentation/filesystems/journalling.rst
> > +++ b/Documentation/filesystems/journalling.rst
> > @@ -115,6 +115,21 @@ called after each transaction commit. You can also use
> >  ``transaction->t_private_list`` for attaching entries to a transaction
> >  that need processing when the transaction commits.
> >
> > +JBD2 also allows client file systems to implement file system specific
> > +commits which are called as ``fast commits``. File systems that wish
> > +to use this feature should first set
> > +``journal->j_fc_commit_callback``. That function is called before
> > +performing a commit. File system can call :c:func:`jbd2_map_fc_buf()`
> > +to get buffers reserved for fast commits. If file system returns 0,
> > +JBD2 assumes that file system performed a fast commit and it backs off
> > +from performing a commit. Otherwise, JBD2 falls back to normal full
>
> Huh.  Ok, so the caller I guess grabs fastcommit blocks, writes the
> intent to the fc block, and pushes it to disk, after which we can return
> to userspace.  Some time later jbd2 gets around to committing things so
> it calls back with ->j_fc_commit_callback at which point we say "Oh! I
> already wrote that to disk as a fastcommit, so return 0" and jbd2
> shrugs and moves on to the next transaction?
I am sorry for the confusing wording here, let me fix it in the next
version. So, either when fsync() is called or when jbd2 wakes up, in
both case, journal->j_fc_commit_callback() is invoked by jbd2. In
other words, journal->j_fc_commit_callback() is the main fastcommit
"commit" routine. If j_fc_commit_callback() returns 0, jbd2 knows that
file system was able to perform a fast commit and in that case a full
commit is not needed. But, there are scenarios when file system thinks
that it would rather do a full commit. File system can think that for
a couple of reasons - accumulated work is too much to fit in fast
commit region, accumulated work is too much to have any performance
benefits, a complex operation (such as punch hole) was performed for
which there's no fast commit support yet. In such cases,
j_fc_commit_callback() can simply return a non-zero value to tell jbd2
to perform a full traditional commit.

Thanks,
Harshad
>
> --D
>
> > +commit. After performing either a fast or a full commit, JBD2 calls
> > +``journal->j_fc_cleanup_cb`` to allow file systems to perform cleanups
> > +for their internal fast commit related data structures. At the replay
> > +time, JBD2 passes each and every fast commit block to the file system
> > +via ``journal->j_fc_replay_cb``. Ext4 effectively uses this fast
> > +commit mechanism to improve journal commit performance.
> > +
> >  JBD2 also provides a way to block all transaction updates via
> >  :c:func:`jbd2_journal_lock_updates()` /
> >  :c:func:`jbd2_journal_unlock_updates()`. Ext4 uses this when it wants a
> > --
> > 2.23.0.rc1.153.gdeed80330f-goog
> >



[Index of Archives]     [Reiser Filesystem Development]     [Ceph FS]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite National Park]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]     [Linux Media]

  Powered by Linux