Re: [PATCH] ext4: introduce per-inode DAX flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 30-08-17 08:57:17, Dave Chinner wrote:
> On Tue, Aug 29, 2017 at 05:49:22PM +0200, Jan Kara wrote:
> > On Mon 28-08-17 20:10:14, Dave Chinner wrote:
> > > On Mon, Aug 28, 2017 at 12:38:54AM -0700, Christoph Hellwig wrote:
> > > > On Sat, Aug 26, 2017 at 09:33:58AM +1000, Dave Chinner wrote:
> > > > > > Nah, -o dax works very well.  It's just the flag instead of the -o dax
> > > > > > option or rather switching it on a mapped file will probably be very dangerous.
> > > > > 
> > > > > In what way is it dangerous, Christoph?
> > > > 
> > > > When I run the following script as a normal user:
> > > > 
> > > > FSXDIR=~/xfstests/ltp/
> > > > FILE=/mnt/foo
> > > > 
> > > > ${FSXDIR}/fsx $FILE &
> > > > 
> > > > while true; do
> > > >     xfs_io -c 'chattr +x' $FILE
> > > >     xfs_io -c 'chattr -x' $FILE
> > > > done
> > > >
> > > > I get this nice little crash:
> > > 
> > > Can you please package that up into an xfstest?
> > > 
> > > > root@testvm:~# sh test.sh
> > > > skipping zero size read
> > > > skipping insert range behind EOF
> > > > truncating to largest ever: 0x3a290
> > > > zero_range to largest ever: 0x3a8d1
> > > > zero_range to largest ever: 0x3fe3e
> > > > zero_range to largest ever: 0x40000
> > > > [  344.898390] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
> > > > [  344.899306] IP: iomap_page_mkwrite+0x17/0xf0
> > > > [  344.899795] PGD 7db37067
> > > > [  344.899796] P4D 7db37067
> > > > [  344.900099] PUD 78c61067
> > > > [  344.900389] PMD 0
> > > > [  344.900665]
> > > > [  344.901075] Oops: 0000 [#1] SMP
> > > > [  344.901536] Modules linked in:
> > > > [  344.901716] CPU: 3 PID: 6052 Comm: fsx Not tainted 4.12.0+ #2199
> > > > [  344.901716] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
> > > > [  344.901716] task: ffff880079a0da00 task.stack: ffffc900068a4000
> > > > [  344.901716] RIP: 0010:iomap_page_mkwrite+0x17/0xf0
> > > > [  344.901716] RSP: 0000:ffffc900068a7d38 EFLAGS: 00010246
> > > > [  344.901716] RAX: ffff8800798dd0d0 RBX: 0000000000000200 RCX: 0000000000000001
> > > > [  344.901716] RDX: 0000000070eb898e RSI: ffffffff82109010 RDI: ffffc900068a7df0
> > > > [  344.901716] RBP: ffffc900068a7d60 R08: ffffffff82ff9fa8 R09: 0000000000000000
> > > > [  344.901716] R10: ffffc900068a7cb0 R11: ffffffff8159b5cc R12: ffffffff82109010
> > > > [  344.901716] R13: 0000000000000000 R14: ffffc900068a7df0 R15: ffff88007da89580
> > >                       ^^^^^^^^^^^^^^^^
> > > 
> > > vmf->page is null.
> > > 
> > > Which means IS_DAX changed half way through a fault, despite us
> > > holding the MMAPLOCK and protecting all the filesystem side of the
> > > fault code from races.
> > > 
> > > Seems to me that even allowing filesystems to switch between
> > > different mapping tree behaviours based on an inode flag is a
> > > fundamentally broken model. The fault action that needs to taken by
> > > the filesystem has already been predetermined by the fault
> > > processing that has already occurred and placed into the contents of
> > > the vmf we've been passed.
> > 
> > I don't think the problem is actually within MM in this particular case.
> > The problem seems to be that xfs_filemap_fault() checks IS_DAX without
> > holding MMAPLOCK and so it can change after that test and before the test
> > in xfs_filemap_page_mkwrite().
> 
> First thing I did was fix that, and it still paniced with vmf->page
> = null in iomap_page_mkwrite, then I realised it was irrelevant

OK, drat.

> because if it can change between xfs_filemap_fault() and
> xfs_filemap_page_mkwrite() it can change anytime in the fault path
> we are not holding the MMAPLOCK....

Agreed but...

> > > Hence I think that if we need to process the fault as a DAX fault
> > > then the vmf needs to tell us that, not require us to look up an
> > > inode flag to determine what to do. ANd if the inode flag changes,
> > > then that needs to be propagated through the mapping and VMAs in a
> > > sane fashion, not just run an invalidation from the filesystem. I
> > > don't know enough about the VM code to say anything useful about how
> > > this needs to be set up, but it's clear that mapping invalidation
> > > and behaviour swaps can't be completely serialised against page
> > > faults from the filesystem side.
> > 
> > But there is no difference in vmf setup from generic MM side. In particular
> > vmf->page is set by the ->fault handler and then it is passed to
> > ->page_mkwrite handler.
> 
> Yes there is. DAX can call the .fault() handler directly from
> handle_pte_fault() for write faults on DAX when there is no pte
> installed. In which case vmf->page is null because we don't go
> through do_wp_page() to install the page we faulted on in the vmf
> before calling .page_mkwrite().
> 
> IOWs, if we fault between the invalidation in the IS_DAX changing
> code and dropping the MMAPLOCK once the transaction inode change is
> complete, then that fault will find an empty pte. It will then call
> ->filemap_fault with vmf->page = NULL, and block on the MMAPLOCK
> until the filesystem transaction is complete. Then it checks
> IS_DAX, finds it's not set, so assumes that we have a page cache
> fault, not a DAX fault....

So if you get to xfs_filemap_fault(), lock MMAPLOCK, then check IS_DAX() -
not set - then you go to filemap_fault() which is perfectly fine with
vmf->page being NULL. What am I missing?

The oops can happen if you call iomap_page_mkwrite() with vmf->page set
to NULL. However I don't see how that is possible after all IS_DAX checks
are under MMAPLOCK - iomap_page_mkwrite() cannot be called through
xfs_filemap_fault() anymore once DAX checks are consistent. And if it gets
called through xfs_filemap_page_mkwrite(), it means that
xfs_filemap_fault() was called before and must have returned
VM_FAULT_LOCKED which means that it has set vmf->page to a correct page.
[sorry, the page lock and entry lock I was speaking about in my previous
email was indeed wrong]

I've tried to reproduce this on my machine but for some reason setting of
per-inode DAX flag does not work. I have (with today's checkout of
xfsprogs):

marvin5:~/:[0]# cat /proc/mounts
...
/dev/ram0 /mnt xfs rw,relatime,attr2,dax,inode64,noquota 0 0

marvin5:~/:[0]# ls /mnt/
fsxfile  fsxfile.fsxgood  fsxfile.fsxlog

marvin5:~/:[0]# ./xfsprogs-dev/io/xfs_io -c 'lsattr' /mnt/fsxfile
-p-------------- /mnt/fsxfile 

marvin5:~/:[0]# ./xfsprogs-dev/io/xfs_io -c 'chattr +x' /mnt/fsxfile

marvin5:~/:[0]# ./xfsprogs-dev/io/xfs_io -c 'lsattr' /mnt/fsxfile
-p-------------- /mnt/fsxfile 

No DAX flag set and no error... What am I doing wrong?

								Honza
-- 
Jan Kara <jack@xxxxxxxx>
SUSE Labs, CR



[Index of Archives]     [Reiser Filesystem Development]     [Ceph FS]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite National Park]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]     [Linux Media]

  Powered by Linux