> > On Mon, 23 Jun 2014, Eric Whitney wrote:
> >
> > > Date: Mon, 23 Jun 2014 17:55:14 -0400
> > > From: Eric Whitney <enwlinux@xxxxxxxxx>
> > > To: "Wilcox, Matthew R" <matthew.r.wilcox@xxxxxxxxx>
> > > Cc: Eric Whitney <enwlinux@xxxxxxxxx>,
> > > "linux-ext4@xxxxxxxxxxxxxxx" <linux-ext4@xxxxxxxxxxxxxxx>,
> > > "tytso@xxxxxxx" <tytso@xxxxxxx>
> > > Subject: Re: data=journal regressions in 3.16-rc1
> > >
> > > The first invocation of fsx causes generic/075 to fail. Within 075.0.fsxlog,
> > > bad reads appear to be the cause:
> > >
> > > READ BAD DATA: offset = 0xb7f0, size = 0x8111, fname = 075.0
> > > OFFSET GOOD BAD RANGE
> > > 0x13000 0x1aee 0x0000 0x 0
> > > operation# (mod 256) for the bad data unknown, check HOLE and EXTEND ops
> > > 0x13001 0xee1a 0x0000 0x 1
> > > operation# (mod 256) for the bad data unknown, check HOLE and EXTEND ops
> > > 0x13002 0x1a01 0x0000 0x 2
> > >
> > > (etc. - goes on until RANGE = 0xf)
> > >
> > > This code is new to me, but it looks like fsx is getting zeros where it
> > > expects other values.
> >
> > This seems to be related to collapse range feature. When adding -C
> > to the fsx the problem goes away. Also when comparing the fsxgood
> > with the real file it seems that there is a big chunk if the file
> > missing in the middle.
> >
> > We need to investigate further. Namjae any idea what might be
> > causing it ?
> Hi, Lukas.
>
> It seems this issue is related with collapse range on test result(with fsx -C option)
> I will check it.
Looks fstart is wrongly calcurated..
- fstart = start + ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
+ fstart = (start - vma->vm_start) + ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
Could you confirm this change is correct ? Matthew ?
Thanks.
>
> Thanks!
> >
> > -Lukas
> >
> > >
> > > Eric
> > >
> > >
> > > * Wilcox, Matthew R <matthew.r.wilcox@xxxxxxxxx>:
> > > > Which test in 075.0.fsxlog indicates failure?
> > > > ________________________________________
> > > > From: Eric Whitney [enwlinux@xxxxxxxxx]
> > > > Sent: June 23, 2014 1:24 PM
> > > > To: linux-ext4@xxxxxxxxxxxxxxx
> > > > Cc: tytso@xxxxxxx; Wilcox, Matthew R
> > > > Subject: data=journal regressions in 3.16-rc1
> > > >
> > > > My regression test results for 3.16-rc1 on x86_64 show three new xfstests
> > > > failures since 3.15 final when running on an ext4 filesystem mounted with the
> > > > data=journal and block_validity mount options (xfstests-bld's data_journal
> > > > scenario). These are generic/075, /112, and /231. All three tests fail
> > > > consistently.
> > > >
> > > > These failures bisect to this kernel patch:
> > > > 7fc34a62ca mm/msync.c: sync only the requested range in msync()
> > > >
> > > > These failures also appear when running on 3.16-rc2, and disappear if the
> > > > aforementioned patch is reverted. I've not seen the failures in any of the
> > > > other test scenarios I've run on 3.16-rc1 (4k, ext3, nojournal, etc.).
> > > >
> > > > No error messages appear in the kernel log, and not a lot useful is reported
> > > > when a test fails. Just for reference, here's the result of a generic/075
> > > > failure:
> > > >
> > > > generic/075 62s ... [15:33:07] [15:33:09] [failed, exit status 1] - output mismatch (see
> > /root/xfstests/results//generic/075.out.bad)
> > > > --- tests/generic/075.out 2014-06-16 13:14:27.233891460 -0400
> > > > +++ /root/xfstests/results//generic/075.out.bad 2014-06-23 15:33:09.654212783 -0400
> > > > @@ -4,15 +4,5 @@
> > > > -----------------------------------------------
> > > > fsx.0 : -d -N numops -S 0
> > > > -----------------------------------------------
> > > > -
> > > > ------------------------------------------------
> > > > -fsx.1 : -d -N numops -S 0 -x
> > > > ------------------------------------------------
> > > > ...
> > > > (Run 'diff -u tests/generic/075.out /root/xfstests/results//generic/075.out.bad' to see the
> > entire diff)
> > > > Ran: generic/075
> > > > Failures: generic/075
> > > > Failed 1 of 1 tests
> > > >
> > > >
> > > > And the contents of xfstests/results/generic/075.out.bad:
> > > >
> > > >
> > > > QA output created by 075
> > > > brevity is wit...
> > > >
> > > > -----------------------------------------------
> > > > fsx.0 : -d -N numops -S 0
> > > > -----------------------------------------------
> > > > fsx (-d -N 1000 -S 0) failed, 0 - compare
> > /root/xfstests/results//generic/075.0.{good,bad,fsxlog}
> > > > od: /root/xfstests/results//generic/075.0.fsxgood: No such file or directory
> > > >
> > > >
> > > > Additional test configuration info:
> > > >
> > > > e2fsprogs master branch: bb9cca2ca9
> > > > xfstests master branch: 45d1fac130
> > > >
> > > > Perhaps data=journal has an unexpected dependency on the old msync behavior,
> > > > given the patch comment?
> > > >
> > > > Thanks,
> > > > Eric
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> > > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > >
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
