On Wed, 19 Feb 2014, Eric Sandeen wrote:
> Date: Wed, 19 Feb 2014 10:56:35 -0600
> From: Eric Sandeen <sandeen@xxxxxxxxxx>
> To: Lukas Czerner <lczerner@xxxxxxxxxx>, linux-ext4@xxxxxxxxxxxxxxx
> Cc: tytso@xxxxxxx
> Subject: Re: [PATCH] e2fsprogs: Remove any occurrence of ext4dev and test_fs
>
> On 2/19/14, 8:57 AM, Lukas Czerner wrote:
> > ext4dev is no longer supported by kernel so we really need to get rid of
> > it entirely from e2fsprogs.
> >
> > This patch removes any occurrence of ext4dev and test_fs flag from the
> > e2fsprogs tools with one exception. Out of paranoia we can still leave
> > the possibility to remove test_fs flag (EXT2_FLAGS_TEST_FILESYS) from
> > the file system using e2fsck by specifying clear_test_fs_flag option in
> > the e2fsck.config file.
>
> Yes, I think this makes good sense. While one could argue that
> test_fs may be used for some other purpose in the future, we have
> added a lot of fairly experimental code without making use of it,
> so I'd argue that it has no practical use going forward.
>
> Acked-by: Eric Sandeen <sandeen@xxxxxxxxxx>
Hi Ted,
are you planning to take this in ?
Thanks!
-Lukas
>
> > Signed-off-by: Lukas Czerner <lczerner@xxxxxxxxxx>
> > ---
> > e2fsck/Makefile.in | 10 +++----
> > e2fsprogs.spec.in | 4 ---
> > lib/blkid/probe.c | 80 ++--------------------------------------------------
> > misc/Makefile.in | 32 ++++++---------------
> > misc/fsck.c | 7 ++---
> > misc/mke2fs.8.in | 4 ---
> > misc/mke2fs.c | 9 +-----
> > misc/mke2fs.conf.in | 5 ----
> > misc/tune2fs.8.in | 8 ------
> > misc/tune2fs.c | 12 +-------
> > tests/mke2fs.conf.in | 5 ----
> > 11 files changed, 20 insertions(+), 156 deletions(-)
> >
> > diff --git a/e2fsck/Makefile.in b/e2fsck/Makefile.in
> > index 8ca329b..441485b 100644
> > --- a/e2fsck/Makefile.in
> > +++ b/e2fsck/Makefile.in
> > @@ -207,7 +207,7 @@ install: $(PROGS) $(MANPAGES) $(FMANPAGES) installdirs
> > $(ES) " INSTALL $(root_sbindir)/$$i"; \
> > $(INSTALL_PROGRAM) $$i $(DESTDIR)$(root_sbindir)/$$i; \
> > done
> > - $(Q) for i in ext2 ext3 ext4 ext4dev; do \
> > + $(Q) for i in ext2 ext3 ext4; do \
> > $(ES) " LINK $(root_sbindir)/fsck.$$i"; \
> > (cd $(DESTDIR)$(root_sbindir); \
> > $(LN) $(LINK_INSTALL_FLAGS) e2fsck fsck.$$i); \
> > @@ -226,7 +226,7 @@ install: $(PROGS) $(MANPAGES) $(FMANPAGES) installdirs
> > $(ES) " INSTALL_DATA $(man5dir)/$$i"; \
> > $(INSTALL_DATA) $$i $(DESTDIR)$(man5dir)/$$i; \
> > done
> > - $(Q) for i in ext2 ext3 ext4 ext4dev; do \
> > + $(Q) for i in ext2 ext3 ext4; do \
> > $(ES) " LINK $(man8dir)/fsck.$$i.8"; \
> > (cd $(DESTDIR)$(man8dir); \
> > $(LN) $(LINK_INSTALL_FLAGS) e2fsck.8 fsck.$$i.8); \
> > @@ -244,8 +244,7 @@ uninstall:
> > done
> > $(RM) -f $(DESTDIR)$(root_sbindir)/fsck.ext2 \
> > $(DESTDIR)$(root_sbindir)/fsck.ext3 \
> > - $(DESTDIR)$(root_sbindir)/fsck.ext4 \
> > - $(DESTDIR)$(root_sbindir)/fsck.ext4dev
> > + $(DESTDIR)$(root_sbindir)/fsck.ext4
> > for i in $(MANPAGES); do \
> > $(RM) -f $(DESTDIR)$(man8dir)/$$i; \
> > done
> > @@ -254,8 +253,7 @@ uninstall:
> > done
> > $(RM) -f $(DESTDIR)$(root_sbindir)/fsck.ext2 \
> > $(DESTDIR)$(root_sbindir)/fsck.ext3 \
> > - $(DESTDIR)$(root_sbindir)/fsck.ext4 \
> > - $(DESTDIR)$(root_sbindir)/fsck.ext4dev
> > + $(DESTDIR)$(root_sbindir)/fsck.ext4
> >
> > clean:
> > $(RM) -f $(PROGS) \#* *\# *.s *.o *.a *~ core e2fsck.static \
> > diff --git a/e2fsprogs.spec.in b/e2fsprogs.spec.in
> > index b188b75..c739e63 100644
> > --- a/e2fsprogs.spec.in
> > +++ b/e2fsprogs.spec.in
> > @@ -122,14 +122,12 @@ exit 0
> > %{_root_sbindir}/fsck.ext2
> > %{_root_sbindir}/fsck.ext3
> > %{_root_sbindir}/fsck.ext4
> > -%{_root_sbindir}/fsck.ext4dev
> > %{_root_sbindir}/logsave
> > %{_root_sbindir}/mke2fs
> > %{_root_etcdir}/mke2fs.conf
> > %{_root_sbindir}/mkfs.ext2
> > %{_root_sbindir}/mkfs.ext3
> > %{_root_sbindir}/mkfs.ext4
> > -%{_root_sbindir}/mkfs.ext4dev
> > %{_root_sbindir}/resize2fs
> > %{_root_sbindir}/tune2fs
> > %{_sbindir}/filefrag
> > @@ -164,7 +162,6 @@ exit 0
> > %{_mandir}/man8/fsck.ext2.8*
> > %{_mandir}/man8/fsck.ext3.8*
> > %{_mandir}/man8/fsck.ext4.8*
> > -%{_mandir}/man8/fsck.ext4dev.8*
> > %{_mandir}/man8/e2image.8*
> > %{_mandir}/man8/e2label.8*
> > %{_mandir}/man8/e2undo.8*
> > @@ -174,7 +171,6 @@ exit 0
> > %{_mandir}/man8/mkfs.ext2.8*
> > %{_mandir}/man8/mkfs.ext3.8*
> > %{_mandir}/man8/mkfs.ext4.8*
> > -%{_mandir}/man8/mkfs.ext4dev.8*
> > %{_mandir}/man8/mklost+found.8*
> > %{_mandir}/man8/resize2fs.8*
> > %{_mandir}/man8/tune2fs.8*
> > diff --git a/lib/blkid/probe.c b/lib/blkid/probe.c
> > index 4b797ab..2877fdf 100644
> > --- a/lib/blkid/probe.c
> > +++ b/lib/blkid/probe.c
> > @@ -305,64 +305,6 @@ static int system_supports_ext4(void)
> > return ret;
> > }
> >
> > -static int system_supports_ext4dev(void)
> > -{
> > - static time_t last_check = 0;
> > - static int ret = -1;
> > - time_t now = time(0);
> > -
> > - if (ret != -1 || (now - last_check) < 5)
> > - return ret;
> > - last_check = now;
> > - ret = (fs_proc_check("ext4dev") || check_for_modules("ext4dev"));
> > - return ret;
> > -}
> > -
> > -static int probe_ext4dev(struct blkid_probe *probe,
> > - struct blkid_magic *id,
> > - unsigned char *buf)
> > -{
> > - struct ext2_super_block *es;
> > - es = (struct ext2_super_block *)buf;
> > -
> > - /* Distinguish from jbd */
> > - if (blkid_le32(es->s_feature_incompat) &
> > - EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)
> > - return -BLKID_ERR_PARAM;
> > -
> > - /*
> > - * If the filesystem does not have a journal and ext2 and ext4
> > - * is not present, then force this to be detected as an
> > - * ext4dev filesystem.
> > - */
> > - if (!(blkid_le32(es->s_feature_compat) &
> > - EXT3_FEATURE_COMPAT_HAS_JOURNAL) &&
> > - !system_supports_ext2() && !system_supports_ext4() &&
> > - system_supports_ext4dev() &&
> > - linux_version_code() >= EXT4_SUPPORTS_EXT2)
> > - goto force_ext4dev;
> > -
> > - /*
> > - * If the filesystem is marked as OK for use by in-development
> > - * filesystem code, but ext4dev is not supported, and ext4 is,
> > - * then don't call ourselves ext4dev, since we should be
> > - * detected as ext4 in that case.
> > - *
> > - * If the filesystem is marked as in use by production
> > - * filesystem, then it can only be used by ext4 and NOT by
> > - * ext4dev, so always disclaim we are ext4dev in that case.
> > - */
> > - if (blkid_le32(es->s_flags) & EXT2_FLAGS_TEST_FILESYS) {
> > - if (!system_supports_ext4dev() && system_supports_ext4())
> > - return -BLKID_ERR_PARAM;
> > - } else
> > - return -BLKID_ERR_PARAM;
> > -
> > -force_ext4dev:
> > - get_ext2_info(probe->dev, id, buf);
> > - return 0;
> > -}
> > -
> > static int probe_ext4(struct blkid_probe *probe, struct blkid_magic *id,
> > unsigned char *buf)
> > {
> > @@ -393,21 +335,7 @@ static int probe_ext4(struct blkid_probe *probe, struct blkid_magic *id,
> > return -BLKID_ERR_PARAM;
> >
> > force_ext4:
> > - /*
> > - * If the filesystem is a OK for use by in-development
> > - * filesystem code, and ext4dev is supported or ext4 is not
> > - * supported, then don't call ourselves ext4, so we can redo
> > - * the detection and mark the filesystem as ext4dev.
> > - *
> > - * If the filesystem is marked as in use by production
> > - * filesystem, then it can only be used by ext4 and NOT by
> > - * ext4dev.
> > - */
> > - if (blkid_le32(es->s_flags) & EXT2_FLAGS_TEST_FILESYS) {
> > - if (system_supports_ext4dev() || !system_supports_ext4())
> > - return -BLKID_ERR_PARAM;
> > - }
> > - get_ext2_info(probe->dev, id, buf);
> > + get_ext2_info(probe->dev, id, buf);
> > return 0;
> > }
> >
> > @@ -453,11 +381,10 @@ static int probe_ext2(struct blkid_probe *probe, struct blkid_magic *id,
> > return -BLKID_ERR_PARAM;
> >
> > /*
> > - * If ext2 is not present, but ext4 or ext4dev are, then
> > + * If ext2 is not present, but ext4 is, then
> > * disclaim we are ext2
> > */
> > - if (!system_supports_ext2() &&
> > - (system_supports_ext4() || system_supports_ext4dev()) &&
> > + if (!system_supports_ext2() && system_supports_ext4() &&
> > linux_version_code() >= EXT4_SUPPORTS_EXT2)
> > return -BLKID_ERR_PARAM;
> >
> > @@ -1400,7 +1327,6 @@ static struct blkid_magic type_array[] = {
> > { "oracleasm", 0, 32, 8, "ORCLDISK", probe_oracleasm },
> > { "ntfs", 0, 3, 8, "NTFS ", probe_ntfs },
> > { "jbd", 1, 0x38, 2, "\123\357", probe_jbd },
> > - { "ext4dev", 1, 0x38, 2, "\123\357", probe_ext4dev },
> > { "ext4", 1, 0x38, 2, "\123\357", probe_ext4 },
> > { "ext3", 1, 0x38, 2, "\123\357", probe_ext3 },
> > { "ext2", 1, 0x38, 2, "\123\357", probe_ext2 },
> > diff --git a/misc/Makefile.in b/misc/Makefile.in
> > index e8cfdb5..90986f6 100644
> > --- a/misc/Makefile.in
> > +++ b/misc/Makefile.in
> > @@ -461,7 +461,7 @@ install: all $(SMANPAGES) $(UMANPAGES) installdirs
> > $(ES) " INSTALL $(sbindir)/$$i"; \
> > $(INSTALL_PROGRAM) $$i $(DESTDIR)$(sbindir)/$$i; \
> > done
> > - $(Q) for i in ext2 ext3 ext4 ext4dev; do \
> > + $(Q) for i in ext2 ext3 ext4; do \
> > $(ES) " LINK $(root_sbindir)/mkfs.$$i"; \
> > (cd $(DESTDIR)$(root_sbindir); \
> > $(LN) $(LINK_INSTALL_FLAGS) mke2fs mkfs.$$i); \
> > @@ -490,7 +490,7 @@ install: all $(SMANPAGES) $(UMANPAGES) installdirs
> > done
> > $(Q) $(RM) -f $(DESTDIR)$(man8dir)/mkfs.ext2.8.gz \
> > $(DESTDIR)$(man8dir)/mkfs.ext3.8.gz
> > - $(Q) for i in ext2 ext3 ext4 ext4dev; do \
> > + $(Q) for i in ext2 ext3 ext4; do \
> > $(ES) " LINK mkfs.$$i.8"; \
> > (cd $(DESTDIR)$(man8dir); \
> > $(LN) $(LINK_INSTALL_FLAGS) mke2fs.8 mkfs.$$i.8); \
> > @@ -519,22 +519,11 @@ install: all $(SMANPAGES) $(UMANPAGES) installdirs
> > mke2fs.conf; then \
> > true; \
> > else \
> > - if grep -q ext4dev $(DESTDIR)$(root_sysconfdir)/mke2fs.conf ; then \
> > - $(ES) " INSTALL_DATA $(root_sysconfdir)/mke2fs.conf.e2fsprogs-new"; \
> > - $(INSTALL_DATA) mke2fs.conf \
> > - $(DESTDIR)$(root_sysconfdir)/mke2fs.conf.e2fsprogs-new; \
> > - echo "Warning: installing mke2fs.conf in $(DESTDIR)$(root_sysconfdir)/mke2fs.conf.e2fsprogs-new"; \
> > - echo "Check to see if you need to update your $(root_sysconfdir)/mke2fs.conf"; \
> > - else \
> > - $(ES) " INSTALL_DATA $(root_sysconfdir)/mke2fs.conf"; \
> > - mv $(DESTDIR)$(root_sysconfdir)/mke2fs.conf \
> > - $(DESTDIR)$(root_sysconfdir)/mke2fs.conf.e2fsprogs-old; \
> > - $(INSTALL_DATA) mke2fs.conf \
> > - $(DESTDIR)$(root_sysconfdir)/mke2fs.conf; \
> > - echo "Your mke2fs.conf is too old. Backing up old version in"; \
> > - echo "$(DESTDIR)$(root_sysconfdir)/mke2fs.conf.e2fsprogs-old. Please check to see"; \
> > - echo "if you have any local customizations that you wish to preserve."; \
> > - fi; \
> > + $(ES) " INSTALL_DATA $(root_sysconfdir)/mke2fs.conf.e2fsprogs-new"; \
> > + $(INSTALL_DATA) mke2fs.conf \
> > + $(DESTDIR)$(root_sysconfdir)/mke2fs.conf.e2fsprogs-new; \
> > + echo "Warning: installing mke2fs.conf in $(DESTDIR)$(root_sysconfdir)/mke2fs.conf.e2fsprogs-new"; \
> > + echo "Check to see if you need to update your $(root_sysconfdir)/mke2fs.conf"; \
> > echo " "; \
> > fi; \
> > else \
> > @@ -565,8 +554,7 @@ uninstall:
> > done
> > $(RM) -f $(DESTDIR)$(root_sbindir)/mkfs.ext2 \
> > $(DESTDIR)$(root_sbindir)/mkfs.ext3 \
> > - $(DESTDIR)$(root_sbindir)/mkfs.ext4 \
> > - $(DESTDIR)$(root_sbindir)/mkfs.ext4dev
> > + $(DESTDIR)$(root_sbindir)/mkfs.ext4
> > for i in $(UPROGS); do \
> > $(RM) -f $(DESTDIR)$(bindir)/$$i; \
> > done
> > @@ -576,11 +564,9 @@ uninstall:
> > $(RM) -f $(DESTDIR)$(man8dir)/mkfs.ext2.8 \
> > $(DESTDIR)$(man8dir)/mkfs.ext3.8 \
> > $(DESTDIR)$(man8dir)/mkfs.ext4.8 \
> > - $(DESTDIR)$(man8dir)/mkfs.ext4dev.8 \
> > $(DESTDIR)$(man8dir)/fsck.ext2.8 \
> > $(DESTDIR)$(man8dir)/fsck.ext3.8 \
> > - $(DESTDIR)$(man8dir)/fsck.ext4.8 \
> > - $(DESTDIR)$(man8dir)/fsck.ext4dev.8
> > + $(DESTDIR)$(man8dir)/fsck.ext4.8
> >
> > for i in $(UMANPAGES); do \
> > $(RM) -f $(DESTDIR)$(man1dir)/$$i; \
> > diff --git a/misc/fsck.c b/misc/fsck.c
> > index 826aaeb..2df15cd 100644
> > --- a/misc/fsck.c
> > +++ b/misc/fsck.c
> > @@ -84,7 +84,6 @@ static const char *really_wanted[] = {
> > "ext2",
> > "ext3",
> > "ext4",
> > - "ext4dev",
> > "jfs",
> > "reiserfs",
> > "xiafs",
> > @@ -455,8 +454,7 @@ static int execute(const char *type, const char *device, const char *mntpt,
> > if (progress) {
> > if ((strcmp(type, "ext2") == 0) ||
> > (strcmp(type, "ext3") == 0) ||
> > - (strcmp(type, "ext4") == 0) ||
> > - (strcmp(type, "ext4dev") == 0)) {
> > + (strcmp(type, "ext4") == 0)) {
> > char tmp[80];
> >
> > tmp[0] = 0;
> > @@ -632,8 +630,7 @@ static struct fsck_instance *wait_one(int flags)
> > continue;
> > if (strcmp(inst2->type, "ext2") &&
> > strcmp(inst2->type, "ext3") &&
> > - strcmp(inst2->type, "ext4") &&
> > - strcmp(inst2->type, "ext4dev"))
> > + strcmp(inst2->type, "ext4"))
> > continue;
> > /*
> > * If we've just started the fsck, wait a tiny
> > diff --git a/misc/mke2fs.8.in b/misc/mke2fs.8.in
> > index 9c38e20..9015770 100644
> > --- a/misc/mke2fs.8.in
> > +++ b/misc/mke2fs.8.in
> > @@ -299,10 +299,6 @@ The \fBroot_owner=\fR option allows explicitly specifying these values,
> > and avoid side-effects for users that do not expect the contents of the
> > filesystem to change based on the user running \fBmke2fs\fR.
> > .TP
> > -.B test_fs
> > -Set a flag in the filesystem superblock indicating that it may be
> > -mounted using experimental kernel code, such as the ext4dev filesystem.
> > -.TP
> > .BI discard
> > Attempt to discard blocks at mkfs time (discarding blocks initially is useful
> > on solid state devices and sparse / thin-provisioned storage). When the device
> > diff --git a/misc/mke2fs.c b/misc/mke2fs.c
> > index facbe4c..44d1a60 100644
> > --- a/misc/mke2fs.c
> > +++ b/misc/mke2fs.c
> > @@ -952,8 +952,6 @@ static void parse_extended_opts(struct ext2_super_block *param,
> >
> > param->s_reserved_gdt_blocks = rsv_gdb;
> > }
> > - } else if (!strcmp(token, "test_fs")) {
> > - param->s_flags |= EXT2_FLAGS_TEST_FILESYS;
> > } else if (!strcmp(token, "lazy_itable_init")) {
> > if (arg)
> > lazy_itable_init = strtoul(arg, &p, 0);
> > @@ -1031,7 +1029,6 @@ static void parse_extended_opts(struct ext2_super_block *param,
> > "\tlazy_journal_init=<0 to disable, 1 to enable>\n"
> > "\troot_uid=<uid of root directory>\n"
> > "\troot_gid=<gid of root directory>\n"
> > - "\ttest_fs\n"
> > "\tdiscard\n"
> > "\tnodiscard\n"
> > "\tquotatype=<usr OR grp>\n\n"),
> > @@ -1244,8 +1241,7 @@ static char **parse_fs_type(const char *fs_type,
> > strcmp(ext_type, "ext2")) {
> > printf(_("\nYour mke2fs.conf file does not define the "
> > "%s filesystem type.\n"), ext_type);
> > - if (!strcmp(ext_type, "ext3") || !strcmp(ext_type, "ext4") ||
> > - !strcmp(ext_type, "ext4dev")) {
> > + if (!strcmp(ext_type, "ext3") || !strcmp(ext_type, "ext4")) {
> > printf("%s", _("You probably need to install an "
> > "updated mke2fs.conf file.\n\n"));
> > }
> > @@ -2670,9 +2666,6 @@ int main (int argc, char *argv[])
> > io_channel_set_options(fs->io, opt_string);
> > }
> >
> > - if (fs_param.s_flags & EXT2_FLAGS_TEST_FILESYS)
> > - fs->super->s_flags |= EXT2_FLAGS_TEST_FILESYS;
> > -
> > if ((fs_param.s_feature_incompat &
> > (EXT3_FEATURE_INCOMPAT_EXTENTS|EXT4_FEATURE_INCOMPAT_FLEX_BG)) ||
> > (fs_param.s_feature_ro_compat &
> > diff --git a/misc/mke2fs.conf.in b/misc/mke2fs.conf.in
> > index 178733f..980bf9c 100644
> > --- a/misc/mke2fs.conf.in
> > +++ b/misc/mke2fs.conf.in
> > @@ -15,11 +15,6 @@
> > auto_64-bit_support = 1
> > inode_size = 256
> > }
> > - ext4dev = {
> > - features = has_journal,extent,huge_file,flex_bg,metadata_csum,64bit,dir_nlink,extra_isize
> > - inode_size = 256
> > - options = test_fs=1
> > - }
> > small = {
> > blocksize = 1024
> > inode_size = 128
> > diff --git a/misc/tune2fs.8.in b/misc/tune2fs.8.in
> > index 9455707..c1c64e7 100644
> > --- a/misc/tune2fs.8.in
> > +++ b/misc/tune2fs.8.in
> > @@ -231,14 +231,6 @@ program.
> > .IP
> > This superblock setting is only honored in 2.6.35+ kernels;
> > and not at all by the ext2 and ext3 file system drivers.
> > -.TP
> > -.B test_fs
> > -Set a flag in the filesystem superblock indicating that it may be
> > -mounted using experimental kernel code, such as the ext4dev filesystem.
> > -.TP
> > -.B ^test_fs
> > -Clear the test_fs flag, indicating the filesystem should only be mounted
> > -using production-level filesystem code.
> > .RE
> > .TP
> > .B \-f
> > diff --git a/misc/tune2fs.c b/misc/tune2fs.c
> > index 8ff47d2..5bc38cb 100644
> > --- a/misc/tune2fs.c
> > +++ b/misc/tune2fs.c
> > @@ -1735,14 +1735,6 @@ static int parse_extended_opts(ext2_filsys fs, const char *opts)
> > intv);
> > fs->super->s_mmp_update_interval = intv;
> > ext2fs_mark_super_dirty(fs);
> > - } else if (!strcmp(token, "test_fs")) {
> > - fs->super->s_flags |= EXT2_FLAGS_TEST_FILESYS;
> > - printf("Setting test filesystem flag\n");
> > - ext2fs_mark_super_dirty(fs);
> > - } else if (!strcmp(token, "^test_fs")) {
> > - fs->super->s_flags &= ~EXT2_FLAGS_TEST_FILESYS;
> > - printf("Clearing test filesystem flag\n");
> > - ext2fs_mark_super_dirty(fs);
> > } else if (strcmp(token, "stride") == 0) {
> > if (!arg) {
> > r_usage++;
> > @@ -1815,9 +1807,7 @@ static int parse_extended_opts(ext2_filsys fs, const char *opts)
> > "\thash_alg=<hash algorithm>\n"
> > "\tmount_opts=<extended default mount options>\n"
> > "\tstride=<RAID per-disk chunk size in blocks>\n"
> > - "\tstripe_width=<RAID stride*data disks in blocks>\n"
> > - "\ttest_fs\n"
> > - "\t^test_fs\n"));
> > + "\tstripe_width=<RAID stride*data disks in blocks>\n"));
> > free(buf);
> > return 1;
> > }
> > diff --git a/tests/mke2fs.conf.in b/tests/mke2fs.conf.in
> > index c06050d..ee246ba 100644
> > --- a/tests/mke2fs.conf.in
> > +++ b/tests/mke2fs.conf.in
> > @@ -17,11 +17,6 @@
> > features = has_journal,extent,huge_file,flex_bg,uninit_bg,dir_nlink,extra_isize
> > inode_size = 256
> > }
> > - ext4dev = {
> > - features = has_journal,extent,huge_file,flex_bg,uninit_bg,dir_nlink,extra_isize
> > - inode_size = 256
> > - options = test_fs=1
> > - }
> > small = {
> > blocksize = 1024
> > inode_size = 128
> >
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
