Re: [PATCH 7/8] xfstests: Add fallocate zero range operation to fsx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/28/14, 10:11 AM, Lukas Czerner wrote:
> This commit adds fallocate FALLOC_FL_ZERO_RANGE support for fsx.

and reworks/consolidates testing of which fallocate ops are available.

Couple things below

> Signed-off-by: Lukas Czerner <lczerner@xxxxxxxxxx>
> ---
>  ltp/fsx.c | 128 +++++++++++++++++++++++++++++++++++++++++++++++---------------
>  1 file changed, 98 insertions(+), 30 deletions(-)
> 
> diff --git a/ltp/fsx.c b/ltp/fsx.c
> index c36a038..5d6d198 100644
> --- a/ltp/fsx.c
> +++ b/ltp/fsx.c
> @@ -69,6 +69,7 @@ int			logcount = 0;	/* total ops */
>   * TRUNCATE:	-	4
>   * FALLOCATE:	-	5
>   * PUNCH HOLE:	-	6
> + * ZERO RANGE:	-	7
>   *
>   * When mapped read/writes are disabled, they are simply converted to normal
>   * reads and writes. When fallocate/fpunch calls are disabled, they are
> @@ -92,7 +93,8 @@ int			logcount = 0;	/* total ops */
>  #define OP_TRUNCATE	4
>  #define OP_FALLOCATE	5
>  #define OP_PUNCH_HOLE	6
> -#define OP_MAX_FULL	7
> +#define OP_ZERO_RANGE	7
> +#define OP_MAX_FULL	8
>  
>  /* operation modifiers */
>  #define OP_CLOSEOPEN	100
> @@ -139,6 +141,7 @@ int	seed = 1;			/* -S flag */
>  int     mapped_writes = 1;              /* -W flag disables */
>  int     fallocate_calls = 1;            /* -F flag disables */
>  int     punch_hole_calls = 1;           /* -H flag disables */
> +int     zero_range_calls = 1;           /* -z flag disables */
>  int 	mapped_reads = 1;		/* -R flag disables it */
>  int	fsxgoodfd = 0;
>  int	o_direct;			/* -Z */
> @@ -317,6 +320,14 @@ logdump(void)
>  						     lp->args[0] + lp->args[1])
>  				prt("\t******PPPP");
>  			break;
> +		case OP_ZERO_RANGE:
> +			prt("ZERO    0x%x thru 0x%x\t(0x%x bytes)",
> +			    lp->args[0], lp->args[0] + lp->args[1] - 1,
> +			    lp->args[1]);
> +			if (badoff >= lp->args[0] && badoff <
> +						     lp->args[0] + lp->args[1])
> +				prt("\t******ZZZZ");
> +			break;
>  		case OP_SKIPPED:
>  			prt("SKIPPED (no operation)");
>  			break;
> @@ -879,6 +890,65 @@ do_punch_hole(unsigned offset, unsigned length)
>  }
>  #endif
>  
> +#ifdef FALLOC_FL_ZERO_RANGE
> +void
> +do_zero_range(unsigned offset, unsigned length)
> +{
> +	unsigned end_offset;
> +	int mode = FALLOC_FL_ZERO_RANGE;
> +	int keep_size;
> +
> +	if (length == 0) {
> +		if (!quiet && testcalls > simulatedopcount)
> +			prt("skipping zero length zero range\n");
> +			log4(OP_SKIPPED, OP_ZERO_RANGE, offset, length);
> +		return;
> +	}
> +
> +	keep_size = random() % 2;
> +
> +	end_offset = keep_size ? 0 : offset + length;
> +
> +	if (end_offset > biggest) {
> +		biggest = end_offset;
> +		if (!quiet && testcalls > simulatedopcount)
> +			prt("zero_range to largest ever: 0x%x\n", end_offset);
> +	}
> +
> +	/*
> +	 * last arg matches fallocate string array index in logdump:
> +	 * 	0: allocate past EOF
> +	 * 	1: extending prealloc
> +	 * 	2: interior prealloc
> +	 */
> +	log4(OP_ZERO_RANGE, offset, length, (end_offset > file_size) ? (keep_size ? 0 : 1) : 2);
> +
> +	if (testcalls <= simulatedopcount)
> +		return;
> +
> +	if ((progressinterval && testcalls % progressinterval == 0) ||
> +	    (debug && (monitorstart == -1 || monitorend == -1 ||
> +		      end_offset <= monitorend))) {
> +		prt("%lu zero\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
> +			offset, offset+length, length);
> +	}
> +	if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
> +		prt("%pzero range: %x to %x\n", offset, length);
> +		prterr("do_zero_range: fallocate");
> +		report_failure(161);

This "161" isn't unique; do_punch_hole and do_preallocate both use the same number.
Is that ok?  I guess there are other dups too, different bug (which probably
nobody cares much about) ;)


> +	}
> +
> +	memset(good_buf + offset, '\0', length);
> +}
> +
> +#else
> +void
> +do_zero_range(unsigned offset, unsigned length)
> +{
> +	return;
> +}
> +#endif
> +
>  #ifdef HAVE_LINUX_FALLOC_H
>  /* fallocate is basically a no-op unless extending, then a lot like a truncate */
>  void
> @@ -1047,6 +1117,12 @@ test(void)
>  			goto out;
>  		}
>  		break;
> +	case OP_ZERO_RANGE:
> +		if (!zero_range_calls) {
> +			log4(OP_SKIPPED, OP_ZERO_RANGE, offset, size);
> +			goto out;
> +		}
> +		break;
>  	}
>  
>  	switch (op) {
> @@ -1085,6 +1161,10 @@ test(void)
>  		TRIM_OFF_LEN(offset, size, file_size);
>  		do_punch_hole(offset, size);
>  		break;
> +	case OP_ZERO_RANGE:
> +		TRIM_OFF_LEN(offset, size, file_size);
> +		do_zero_range(offset, size);
> +		break;
>  	default:
>  		prterr("test: unknown operation");
>  		report_failure(42);
> @@ -1140,7 +1220,10 @@ usage(void)
>  "	-F: Do not use fallocate (preallocation) calls\n"
>  #endif
>  #ifdef FALLOC_FL_PUNCH_HOLE
> -"       -H: Do not use punch hole calls\n"
> +"	-H: Do not use punch hole calls\n"
> +#endif
> +#ifdef FALLOC_FL_ZERO_RANGE
> +"	-E: Do not use zero range calls\n"
>  #endif
>  "	-L: fsxLite - no file creations & no file size changes\n\
>  	-N numops: total # operations to do (default infinity)\n\
> @@ -1290,40 +1373,21 @@ int aio_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
>  
>  #endif
>  
> -void
> -test_fallocate()
> +int
> +test_fallocate(int mode)
>  {
>  #ifdef HAVE_LINUX_FALLOC_H
> +	int ret = 0;
>  	if (!lite && fallocate_calls) {
> -		if (fallocate(fd, 0, 0, 1) && errno == EOPNOTSUPP) {
> +		if (fallocate(fd, mode, 0, 1) && errno == EOPNOTSUPP) {
>  			if(!quiet)
>  				warn("main: filesystem does not support fallocate, disabling\n");

we've lost which mode isn't supported, now.  Maybe you should print the
flags which didn't pass?  Too bad your fancy flag stuff is in fsstress.c.  ;)
or do ("does not support fallocate mode 0x%x", mode) ?


> -			fallocate_calls = 0;
>  		} else {
> +			ret = 1;
>  			ftruncate(fd, 0);
>  		}
>  	}
> -#else /* ! HAVE_LINUX_FALLOC_H */
> -	fallocate_calls = 0;
> -#endif
> -
> -}
> -
> -void
> -test_punch_hole()
> -{
> -#ifdef FALLOC_FL_PUNCH_HOLE
> -	if (!lite && punch_hole_calls) {
> -		if (fallocate(fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
> -				0, 1) && errno == EOPNOTSUPP) {
> -			if(!quiet)
> -				warn("main: filesystem does not support fallocate punch hole, disabling");
> -			punch_hole_calls = 0;
> -		} else
> -			ftruncate(fd, 0);
> -	}
> -#else /* ! PUNCH HOLE */
> -	punch_hole_calls = 0;
> +	return ret;
>  #endif
>  }
>  
> @@ -1345,7 +1409,7 @@ main(int argc, char **argv)
>  
>  	setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
>  
> -	while ((ch = getopt(argc, argv, "b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHLN:OP:RS:WZ"))
> +	while ((ch = getopt(argc, argv, "b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHzLN:OP:RS:WZ"))
>  	       != EOF)
>  		switch (ch) {
>  		case 'b':
> @@ -1445,6 +1509,9 @@ main(int argc, char **argv)
>  		case 'H':
>  			punch_hole_calls = 0;
>  			break;
> +		case 'z':
> +			zero_range_calls = 0;
> +			break;
>  		case 'L':
>  		        lite = 1;
>  			break;
> @@ -1590,8 +1657,9 @@ main(int argc, char **argv)
>  	} else 
>  		check_trunc_hack();
>  
> -	test_fallocate();
> -	test_punch_hole();
> +	fallocate_calls = test_fallocate(0);
> +	punch_hole_calls = test_fallocate(FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE);
> +	zero_range_calls = test_fallocate(FALLOC_FL_ZERO_RANGE);

Could probably add the do_warn() stuff here, explicitly stating what got disabled.

-Eric

>  
>  	while (numops == -1 || numops--)
>  		test();
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Reiser Filesystem Development]     [Ceph FS]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite National Park]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]     [Linux Media]

  Powered by Linux