On Tue 28-05-13 10:23:25, Li Wang wrote:
> For hole punching, currently ext4 will synchronously write back the
> dirty pages fit into the hole, since the data on the disk responding
> to those pages are to be deleted, it is benefical to directly release
> those pages, no matter they are dirty or not, except the ordered case.
>
> Signed-off-by: Li Wang <liwang@xxxxxxxxxxxxxxx>
> Signed-off-by: Yunchuan Wen <yunchuanwen@xxxxxxxxxxxxxxx>
> Cc: Dmitry Monakhov <dmonakhov@xxxxxxxxxx>
> Reviewed-by: Zheng Liu <wenqing.lz@xxxxxxxxxx>
> Reviewed-by: Jan Kara <jack@xxxxxxx>
> ---
> Hi Jan,
> Did you mean this?
> It seems you donot like the jbd2_journal_begin_ordered_discard:),
> However, what do you think of calling jbd2_journal_begin_ordered_punch_hole()
> from jbd2_journal_begin_ordered_truncate()? In my option,
> the two guys stand at the same level. Nevertheless,
> it is up to your choice.
Well, punch hole is a more generic version of truncate so it seems
perfectly fine for me to implement truncate using punch hole. Thanks for
updating the patch!
Honza
> ---
> fs/ext4/inode.c | 27 ++++++++++++++++-----------
> fs/jbd2/journal.c | 2 +-
> fs/jbd2/transaction.c | 29 ++++++-----------------------
> include/linux/jbd2.h | 33 +++++++++++++++++++++++++++++++--
> 4 files changed, 54 insertions(+), 37 deletions(-)
>
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index d6382b8..844d1b8 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -3569,6 +3569,16 @@ int ext4_can_truncate(struct inode *inode)
> return 0;
> }
>
> +static inline int ext4_begin_ordered_punch_hole(struct inode *inode,
> + loff_t start, loff_t length)
> +{
> + if (!EXT4_I(inode)->jinode)
> + return 0;
> + return jbd2_journal_begin_ordered_punch_hole(EXT4_JOURNAL(inode),
> + EXT4_I(inode)->jinode,
> + start, start+length-1);
> +}
> +
> /*
> * ext4_punch_hole: punches a hole in a file by releaseing the blocks
> * associated with the given offset and length
> @@ -3602,17 +3612,6 @@ int ext4_punch_hole(struct file *file, loff_t offset, loff_t length)
>
> trace_ext4_punch_hole(inode, offset, length);
>
> - /*
> - * Write out all dirty pages to avoid race conditions
> - * Then release them.
> - */
> - if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
> - ret = filemap_write_and_wait_range(mapping, offset,
> - offset + length - 1);
> - if (ret)
> - return ret;
> - }
> -
> mutex_lock(&inode->i_mutex);
> /* It's not possible punch hole on append only file */
> if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) {
> @@ -3644,6 +3643,12 @@ int ext4_punch_hole(struct file *file, loff_t offset, loff_t length)
> first_page_offset = first_page << PAGE_CACHE_SHIFT;
> last_page_offset = last_page << PAGE_CACHE_SHIFT;
>
> + if (ext4_should_order_data(inode)) {
> + ret = ext4_begin_ordered_punch_hole(inode, offset, length);
> + if (ret)
> + return ret;
> + }
> +
> /* Now release the pages */
> if (last_page_offset > first_page_offset) {
> truncate_pagecache_range(inode, first_page_offset,
> diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
> index 9545757..7af4e4f 100644
> --- a/fs/jbd2/journal.c
> +++ b/fs/jbd2/journal.c
> @@ -97,7 +97,7 @@ EXPORT_SYMBOL(jbd2_journal_force_commit);
> EXPORT_SYMBOL(jbd2_journal_file_inode);
> EXPORT_SYMBOL(jbd2_journal_init_jbd_inode);
> EXPORT_SYMBOL(jbd2_journal_release_jbd_inode);
> -EXPORT_SYMBOL(jbd2_journal_begin_ordered_truncate);
> +EXPORT_SYMBOL(jbd2_journal_begin_ordered_punch_hole);
> EXPORT_SYMBOL(jbd2_inode_cache);
>
> static void __journal_abort_soft (journal_t *journal, int errno);
> diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
> index 10f524c..262b1c3 100644
> --- a/fs/jbd2/transaction.c
> +++ b/fs/jbd2/transaction.c
> @@ -2305,29 +2305,10 @@ done:
> return 0;
> }
>
> -/*
> - * File truncate and transaction commit interact with each other in a
> - * non-trivial way. If a transaction writing data block A is
> - * committing, we cannot discard the data by truncate until we have
> - * written them. Otherwise if we crashed after the transaction with
> - * write has committed but before the transaction with truncate has
> - * committed, we could see stale data in block A. This function is a
> - * helper to solve this problem. It starts writeout of the truncated
> - * part in case it is in the committing transaction.
> - *
> - * Filesystem code must call this function when inode is journaled in
> - * ordered mode before truncation happens and after the inode has been
> - * placed on orphan list with the new inode size. The second condition
> - * avoids the race that someone writes new data and we start
> - * committing the transaction after this function has been called but
> - * before a transaction for truncate is started (and furthermore it
> - * allows us to optimize the case where the addition to orphan list
> - * happens in the same transaction as write --- we don't have to write
> - * any data in such case).
> - */
> -int jbd2_journal_begin_ordered_truncate(journal_t *journal,
> +
> +int jbd2_journal_begin_ordered_punch_hole(journal_t *journal,
> struct jbd2_inode *jinode,
> - loff_t new_size)
> + loff_t start, loff_t end)
> {
> transaction_t *inode_trans, *commit_trans;
> int ret = 0;
> @@ -2346,10 +2327,12 @@ int jbd2_journal_begin_ordered_truncate(journal_t *journal,
> spin_unlock(&journal->j_list_lock);
> if (inode_trans == commit_trans) {
> ret = filemap_fdatawrite_range(jinode->i_vfs_inode->i_mapping,
> - new_size, LLONG_MAX);
> + start, end);
> if (ret)
> jbd2_journal_abort(journal, ret);
> }
> out:
> return ret;
> }
> +
> +
> diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
> index 6e051f4..8eb7865 100644
> --- a/include/linux/jbd2.h
> +++ b/include/linux/jbd2.h
> @@ -1126,12 +1126,41 @@ extern int jbd2_journal_clear_err (journal_t *);
> extern int jbd2_journal_bmap(journal_t *, unsigned long, unsigned long long *);
> extern int jbd2_journal_force_commit(journal_t *);
> extern int jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *inode);
> -extern int jbd2_journal_begin_ordered_truncate(journal_t *journal,
> - struct jbd2_inode *inode, loff_t new_size);
> +extern int jbd2_journal_begin_ordered_punch_hole(journal_t *,
> + struct jbd2_inode *,
> + loff_t, loff_t);
> extern void jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode);
> extern void jbd2_journal_release_jbd_inode(journal_t *journal, struct jbd2_inode *jinode);
>
> /*
> + * File truncate and transaction commit interact with each other in a
> + * non-trivial way. If a transaction writing data block A is
> + * committing, we cannot discard the data by truncate until we have
> + * written them. Otherwise if we crashed after the transaction with
> + * write has committed but before the transaction with truncate has
> + * committed, we could see stale data in block A. This function is a
> + * helper to solve this problem. It starts writeout of the truncated
> + * part in case it is in the committing transaction.
> + *
> + * Filesystem code must call this function when inode is journaled in
> + * ordered mode before truncation happens and after the inode has been
> + * placed on orphan list with the new inode size. The second condition
> + * avoids the race that someone writes new data and we start
> + * committing the transaction after this function has been called but
> + * before a transaction for truncate is started (and furthermore it
> + * allows us to optimize the case where the addition to orphan list
> + * happens in the same transaction as write --- we don't have to write
> + * any data in such case).
> + */
> +static inline int jbd2_journal_begin_ordered_truncate(journal_t *journal,
> + struct jbd2_inode *jinode,
> + loff_t new_size)
> +{
> + return jbd2_journal_begin_ordered_punch_hole(journal, jinode,
> + new_size, LLONG_MAX);
> +}
> +
> +/*
> * journal_head management
> */
> struct journal_head *jbd2_journal_add_journal_head(struct buffer_head *bh);
> --
> 1.7.9.5
>
>
--
Jan Kara <jack@xxxxxxx>
SUSE Labs, CR
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
