On Mon 21-01-13 13:30:26, Sedat Dilek wrote:
> On Mon, Jan 21, 2013 at 12:40 PM, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
> > On Mon, Jan 21, 2013 at 11:47 AM, Jan Kara <jack@xxxxxxx> wrote:
> >> The traces don't suggest an ext4/jbd2 problem. What is happening is that
> >> jbd2 is waiting for IO to finish and that never happens. Seeing that you
> >> loop device I'd think it's some interaction of the loop device and
> >> freezing. Can you reproduce the issue without the loop device (i.e. with
> >> the filesystem directly on e.g. scsi disk)? I suspect the reason is
> >> something like that the backing filesystem is already frozen so filesystem
> >> on top of it cannot write all the data and hangs waiting for IO -> suspend
> >> doesn't happen. Contents of /proc/mounts and losetup -l would help us
> >> understand what's going on.
> >>
> >
> > As said I am here in a very uncommon WUBI environment means my
> > Ubuntu/precise rootfs-image lays on the Win7-partition (NTFS).
> > Your explanation sounds reasonable to me as this line from my attached
> > testcase causes the troubles.
> >
> > echo mem > /sys/power/state && sleep 1
> >
> > So, /sys/ is not writable immediately after freezer ends
> >
> > I checked again and again my logs and have seen "starving" lines
> > reported by rtkit-daemon, but did not really get wiser what they want
> > to tell me. Stopping rtkit-daemon or resetting all or all-known
> > threads before running my pm_test/freezer did not help, too.
> >
> > /usr/sbin/rtkitctl --help
> > rtkitctl [options]
> >
> > -h, --help Show this help
> > --version Show version
> >
> > --reset-known Reset real-time status of known threads
> > --reset-all Reset real-time status of all threads
> > --start Start RealtimeKit if it is not running already
> > -k, --exit Terminate running RealtimeKit daemon
> >
> > Here are the outputs you wanted with some more (fstab, grub-config) etc.
> > I have here no -l option for losetup command.
> >
> >
> > - Sedat -
> >
> > P.S.: Outputs for Honza...
> >
> > $ sudo cat /proc/mounts
> > rootfs / rootfs rw 0 0
> > sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
> > proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
> > udev /dev devtmpfs rw,relatime,size=1966948k,nr_inodes=491737,mode=755 0 0
> > devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
> > tmpfs /run tmpfs rw,nosuid,relatime,size=788076k,mode=755 0 0
> > /dev/sda2 /host fuseblk
> > rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096
> > 0 0
> > /dev/loop0 / ext4 rw,relatime,errors=remount-ro,data=ordered 0 0
> > none /sys/fs/fuse/connections fusectl rw,relatime 0 0
> > none /sys/kernel/debug debugfs rw,relatime 0 0
> > none /sys/kernel/security securityfs rw,relatime 0 0
> > none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0
> > none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0
> > gvfs-fuse-daemon /home/wearefam/.gvfs fuse.gvfs-fuse-daemon
> > rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0
> >
> > $ sudo losetup --all --verbose
> > /dev/loop0: [0802]:17982 (/host/ubuntu/disks/root.disk)
> >
> > $ sudo losetup --find --verbose
> > Loop device is /dev/loop1
> > /dev/loop1
> >
> > [ /etc/fstab ]
> > # /etc/fstab: static file system information.
> >
> > # Use 'blkid' to print the universally unique identifier for a
> > # device; this may be used with UUID= as a more robust way to name devices
> > # that works even if disks are added and removed. See fstab(5).
> >
> > # <file system> <mount point> <type> <options>
> > <dump> <pass>
> > proc /proc proc
> > nodev,noexec,nosuid 0 0
> > /host/ubuntu/disks/root.disk / ext4
> > loop,errors=remount-ro 0 1
> > /host/ubuntu/disks/swap.disk none swap loop,sw
> > 0 0
> > - EOF -
> >
> > [ /boot/grub/grub.cfg ]
> > ...
> > menuentry 'Ubuntu, mit Linux 3.8.0-rc4-next20130121-1-iniza-generic'
> > --class ubuntu --class gnu-linux --class gnu --class os {
> > set gfxpayload=$linux_gfx_mode
> > insmod part_msdos
> > insmod ntfs
> > set root='(hd0,msdos2)'
> > search --no-floppy --fs-uuid --set=root 001AADA61AAD9964
> > loopback loop0 /ubuntu/disks/root.disk
> > set root=(loop0)
> > linux /boot/vmlinuz-3.8.0-rc4-next20130121-1-iniza-generic
> > root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro
> > initrd /boot/initrd.img-3.8.0-rc4-next20130121-1-iniza-generic
> > }
> > ...
> >
>
> Here some more useful outputs:
>
> $ LC_ALL=C df -h -T
> Filesystem Type Size Used Avail Use% Mounted on
> rootfs rootfs 17G 15G 1.5G 92% /
> udev devtmpfs 1.9G 12K 1.9G 1% /dev
> tmpfs tmpfs 770M 892K 769M 1% /run
> /dev/sda2 fuseblk 444G 81G 364G 19% /host
> /dev/loop0 ext4 17G 15G 1.5G 92% /
> none tmpfs 5.0M 0 5.0M 0% /run/lock
> none tmpfs 1.9G 260K 1.9G 1% /run/shm
>
> $ sudo LC_ALL=C fdisk -l /dev/sda
>
> Disk /dev/sda: 500.1 GB, 500107862016 bytes
> 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
> Units = sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 4096 bytes
> I/O size (minimum/optimal): 4096 bytes / 4096 bytes
> Disk identifier: 0xcb9885ab
>
> Device Boot Start End Blocks Id System
> /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
> /dev/sda2 206848 931299327 465546240 7 HPFS/NTFS/exFAT
> /dev/sda3 931299328 976773119 22736896 27 Hidden NTFS WinRE
>
> I am still reflecting on any shitty userspace app is causing all the
> trouble, but I have zero clue how to dig that...
Well, I think the outputs make it pretty clear. /dev/loop0 is a mounted
image from fuse filesystem. Fuse daemon making filesystem accessible gets
frozen before /dev/loop0 gets fully written out and so jbd2 journal thread
hangs. Maybe Miklos (added to CC) could fill in some details / ideas but I
think the setup like you have never really worked...
Honza
--
Jan Kara <jack@xxxxxxx>
SUSE Labs, CR
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
