On 10/30/12 7:57 AM, Ashish Sangwan wrote:
> We have a 2TB HDD having native 4k sector size but emulated as 512bytes.
> And we want to use this device with sector size 4k and not 512bytes.
>
> In mkfs.xfs there is option "-s", using which, one can set the sector size.
> What is the use case of this option?
That's a question for the xfs list ;) xfs does issue IOs down
to that sector size, defaulting to 512, so setting it to the physical
sector size makes sense. Newer mkfs.xfs does this automatically:
287d168b550857ce40e04b5f618d7eb91b87022f mkfs.xfs: properly handle physical sector size
This primarily allows us to default to using the physical
sectorsize for mkfs's "sector size" value, the fundamental
size of any IOs the filesystem will perform.
> Also, such option is not present for ext4. So, apart from aligining the
> partition on multiple of 8 sector numbers do we have to do something else
> for using 4k sectors?
Nope. Although I wouldn't specify a block size less than the physical
sector size (and if you do, mkfs.ext4 will complain) -
# blockdev --getss --getpbsz /dev/sde
512
4096
# mkfs.ext4 -b 1024 /dev/sde
mke2fs 1.41.12 (17-May-2010)
Warning: specified blocksize 1024 is less than device physical sectorsize 4096
...
> We measured the write performance of XFS/EXT4 with sector size 512bytes and 4KB.
>
> XFS With 512 byte sector size=>
> RecSize WriteSpeed RanReadSpeed RanWriteSpeed
> 524288 22.12MB/sec 0.00MB/sec 0.00MB/sec
> 262144 18.87MB/sec 0.00MB/sec 0.00MB/sec
> 131072 18.25MB/sec 0.00MB/sec 0.00MB/sec
> 65536 18.90MB/sec 0.00MB/sec 0.00MB/sec
> 32768 23.26MB/sec 0.00MB/sec 0.00MB/sec
> 16384 18.21MB/sec 0.00MB/sec 0.00MB/sec
> 8192 21.23MB/sec 0.00MB/sec 0.00MB/sec
> 4096 20.58MB/sec 0.00MB/sec 0.00MB/sec
>
> XFS after setting 4KB sector size (-s size 4096) =>
> RecSize WriteSpeed RanReadSpeed RanWriteSpeed
> 524288 21.93MB/sec 0.00MB/sec 0.00MB/sec
> 262144 28.49MB/sec 0.00MB/sec 0.00MB/sec
> 131072 25.64MB/sec 0.00MB/sec 0.00MB/sec
> 65536 24.27MB/sec 0.00MB/sec 0.00MB/sec
> 32768 26.39MB/sec 0.00MB/sec 0.00MB/sec
> 16384 28.49MB/sec 0.00MB/sec 0.00MB/sec
> 8192 22.83MB/sec 0.00MB/sec 0.00MB/sec
> 4096 24.88MB/sec 0.00MB/sec 0.00MB/sec
>
> Ext4 with default mkfs.ext4 options =>
> RecSize WriteSpeed RanReadSpeed RanWriteSpeed
> 524288 31.95MB/sec 0.00MB/sec 0.00MB/sec
> 262144 26.88MB/sec 0.00MB/sec 0.00MB/sec
> 131072 23.04MB/sec 0.00MB/sec 0.00MB/sec
> 65536 25.91MB/sec 0.00MB/sec 0.00MB/sec
> 32768 24.69MB/sec 0.00MB/sec 0.00MB/sec
> 16384 24.27MB/sec 0.00MB/sec 0.00MB/sec
> 8192 32.05MB/sec 0.00MB/sec 0.00MB/sec
> 4096 30.21MB/sec 0.00MB/sec 0.00MB/sec
>
> Ext4 performed little better than XFS (-s size 4096).
> Seeing this, we are tempted to believe that ext4 is already
> using 4k sectors.
>
> Is there any way to make sure that ext4 is indeed using 4k sectors?
ext4 will only do IOs in multiples of block size, so if you set it to
4k, and properly align the filesystem start to a 4k boundary, there
is nothing else to do.
-Eric
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
