Re: [PATCH 1/4] e2fsck: Discard only unused parts of inode table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 5 Mar 2012, Eric Sandeen wrote:

> On 03/05/2012 01:49 AM, Lukas Czerner wrote:
> > When calling e2fsck with '-E discard' option it might happen that
> > valid inodes are discarded accidentally. This is because we just
> > discard the part of inode table which lies past the free inode count.
> > This is terribly wrong (sorry!).
> > 
> > This patch fixes it so only the free parts of an inode table
> > is discarded, leaving used inodes intact. This was tested with highly
> > fragmented inode tables with block size 4k and 1k.
> 
> Every time I look at this I have new comments.  The surrounding code
> is confusing to read, IMHO, so don't take it too hard. ;)
> 
> > Signed-off-by: Lukas Czerner <lczerner@xxxxxxxxxx>
> > Reported-by: Phillip Susi <psusi@xxxxxxxxxx>
> 
> I'll go ahead and:
> 
> Reviewed-by: Eric Sandeen <sandeen@xxxxxxxxxx>
> 
> so hopefully we can get this in & fix the bug.
> 
> but I have one more suggestion, which could be done as a cleanup later
> on (I think the check_*_bitmaps could use a fair bit of cleanup for
> clarity):
> 
> /*
>  * If the last inode is free, we can discard it as well.
>  */
> if (inodes >= first_free)
> 	e2fsck_discard_inodes(ctx, group, first_free,
> 					inodes - first_free + 1);
> 
> could/should probably be something like:
> 
> if (inodes == first_free)
> 	e2fsck_discard_inodes(ctx, group, inodes, 1);
> 
> I _think_ this case should only, ever, handle the last inode in the
> group, right?

Hi Eric,

thanks for the review. It almost seems that I am not able to write
understandable comments :). The reason the comment is there is that we
usually do:

	if (inodes > first_free)

but in this particular case we do

	if (inodes >= first_free)

And we have '=' there because at that point we might have last inode
which is free. But because we will not have another iteration on that
group, there will not be another 'used' inode which will result the code
to go in the 'if (bitmap)' branch discarding that last inode. So we have
to discard the last inode as well.

However, doing (inodes == first_free) would be wrong, because we might
have more free inodes at the end of the inode table so first_free will
be smaller than inodes (which is actually the usual case as we do in the
'if (bitmap)' branch).

So the comment:

	If the last inode is free, we can discard it as well.

is simply there 'because' we will only hit this if the last inode is
free and we have to discard it as well (thus the '>=').

Hope that makes sense, I am not very good at explaining things :)

Thanks!
-Lukas

> 
> -Eric
> 
> > ---
> >  e2fsck/pass5.c |   90 +++++++++++++++++++++++++++++++++++++++++--------------
> >  1 files changed, 67 insertions(+), 23 deletions(-)
> > 
> > diff --git a/e2fsck/pass5.c b/e2fsck/pass5.c
> > index 1e836e3..ee73dd5 100644
> > --- a/e2fsck/pass5.c
> > +++ b/e2fsck/pass5.c
> > @@ -94,6 +94,52 @@ static void e2fsck_discard_blocks(e2fsck_t ctx, io_manager manager,
> >  		ctx->options &= ~E2F_OPT_DISCARD;
> >  }
> >  
> > +/*
> > + * This will try to discard number 'count' inodes starting at
> > + * inode number 'start' within the 'group'. Note that 'start'
> > + * is 1-based, it means that we need to adjust it by -1 in this
> > + * function to compute right offset in the particular inode table.
> > + */
> > +static void e2fsck_discard_inodes(e2fsck_t ctx, int group,
> > +				  int start, int count)
> > +{
> > +	ext2_filsys fs = ctx->fs;
> > +	blk64_t blk, num;
> > +	int orig = count;
> > +
> > +	/*
> > +	 * Sanity check for 'start'
> > +	 */
> > +	if ((start < 1) || (start > EXT2_INODES_PER_GROUP(fs->super))) {
> > +		printf("PROGRAMMING ERROR: Got start %d outside of group %d!"
> > +		       " Disabling discard\n",
> > +			start, group);
> > +		ctx->options &= ~E2F_OPT_DISCARD;
> > +	}
> > +
> > +	if ((ctx->options & E2F_OPT_NO) || !(ctx->options & E2F_OPT_DISCARD))
> > +		return;
> > +
> > +	/*
> > +	 * Start is inode number within the group which starts
> > +	 * counting from 1, so we need to adjust it.
> > +	 */
> > +	start -= 1;
> > +
> > +	/*
> > +	 * We can discard only blocks containing only unused
> > +	 * inodes in the table.
> > +	 */
> > +	blk = DIV_ROUND_UP(start,
> > +		EXT2_INODES_PER_BLOCK(fs->super));
> > +	count -= (blk * EXT2_INODES_PER_BLOCK(fs->super) - start);
> > +	blk += ext2fs_inode_table_loc(fs, group);
> > +	num = count / EXT2_INODES_PER_BLOCK(fs->super);
> > +
> > +	if (num > 0)
> > +		e2fsck_discard_blocks(ctx, fs->io->manager, blk, num);
> > +}
> > +
> >  #define NO_BLK ((blk64_t) -1)
> >  
> >  static void print_bitmap_problem(e2fsck_t ctx, int problem,
> > @@ -435,6 +481,7 @@ static void check_inode_bitmaps(e2fsck_t ctx)
> >  	int		skip_group = 0;
> >  	int		redo_flag = 0;
> >  	io_manager	manager = ctx->fs->io->manager;
> > +	unsigned long long	first_free = fs->super->s_inodes_per_group + 1;
> >  
> >  	clear_problem_context(&pctx);
> >  	free_array = (int *) e2fsck_allocate_memory(ctx,
> > @@ -497,6 +544,7 @@ redo_counts:
> >  				 * are 0, count the free inode,
> >  				 * skip the current block group.
> >  				 */
> > +				first_free = 1;
> >  				inodes = fs->super->s_inodes_per_group - 1;
> >  				group_free = inodes;
> >  				free_inodes += inodes;
> > @@ -561,50 +609,46 @@ redo_counts:
> >  		ctx->options &= ~E2F_OPT_DISCARD;
> >  
> >  do_counts:
> > +		inodes++;
> >  		if (bitmap) {
> >  			if (ext2fs_test_inode_bitmap2(ctx->inode_dir_map, i))
> >  				dirs_count++;
> > +			if (inodes > first_free) {
> > +				e2fsck_discard_inodes(ctx, group, first_free,
> > +						      inodes - first_free);
> > +				first_free = fs->super->s_inodes_per_group + 1;
> > +			}
> >  		} else if (!skip_group || csum_flag) {
> >  			group_free++;
> >  			free_inodes++;
> > +			if (first_free > inodes)
> > +				first_free = inodes;
> >  		}
> >  
> > -		inodes++;
> >  		if ((inodes == fs->super->s_inodes_per_group) ||
> >  		    (i == fs->super->s_inodes_count)) {
> > -
> > -			free_array[group] = group_free;
> > -			dir_array[group] = dirs_count;
> > -
> > -			/* Discard inode table */
> > -			if (ctx->options & E2F_OPT_DISCARD) {
> > -				blk64_t used_blks, blk, num;
> > -
> > -				used_blks = DIV_ROUND_UP(
> > -					(EXT2_INODES_PER_GROUP(fs->super) -
> > -					group_free),
> > -					EXT2_INODES_PER_BLOCK(fs->super));
> > -
> > -				blk = ext2fs_inode_table_loc(fs, group) +
> > -				      used_blks;
> > -				num = fs->inode_blocks_per_group -
> > -				      used_blks;
> > -				e2fsck_discard_blocks(ctx, manager, blk, num);
> > -			}
> > -
> > +			/*
> > +			 * If the last inode is free, we can discard it as well.
> > +			 */
> > +			if (inodes >= first_free)
> > +				e2fsck_discard_inodes(ctx, group, first_free,
> > +						      inodes - first_free + 1);
> >  			/*
> >  			 * If discard zeroes data and the group inode table
> >  			 * was not zeroed yet, set itable as zeroed
> >  			 */
> >  			if ((ctx->options & E2F_OPT_DISCARD) &&
> > -			    (io_channel_discard_zeroes_data(fs->io)) &&
> > +			    io_channel_discard_zeroes_data(fs->io) &&
> >  			    !(ext2fs_bg_flags_test(fs, group,
> > -						  EXT2_BG_INODE_ZEROED))) {
> > +						   EXT2_BG_INODE_ZEROED))) {
> >  				ext2fs_bg_flags_set(fs, group,
> >  						    EXT2_BG_INODE_ZEROED);
> >  				ext2fs_group_desc_csum_set(fs, group);
> >  			}
> >  
> > +			first_free = fs->super->s_inodes_per_group + 1;
> > +			free_array[group] = group_free;
> > +			dir_array[group] = dirs_count;
> >  			group ++;
> >  			inodes = 0;
> >  			skip_group = 0;
> 
> 

-- 
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Reiser Filesystem Development]     [Ceph FS]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite National Park]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]     [Linux Media]

  Powered by Linux