Hmm, it sounds like we're hitting some kind of scaling problem. How
many CPU's/cores do you have on your server? And it would be
interesting to try varying the --numjobs parameter and see how the
various file systems behave with 1, 2, 4, 8, and 16 threads.
The other thing that's worth checking is to try using filefrag -v on
the test file after the benchmark has finished, just to make sure the
file layout is sane. It should be, but I just want to double check...
- Ted
On Fri, Mar 02, 2012 at 08:50:55AM +0800, Xupeng Yun wrote:
> On Fri, Mar 2, 2012 at 03:47, Ted Ts'o <tytso@xxxxxxx> wrote:
> > Two things I'd try:
> >
> > #1) If this is a freshly created file system, the kernel may be
> > initializing the inode table in the background, and this could be
> > interfering with your benchmark workload. To address this, you can
> > either (a) add the mount option noinititable, (b) add the mke2fs
> > option "-E lazy_itable_init=0" --- but this will cause the mke2fs to
> > take a lot longer, or (c) mount the file system and wait until
> > "dumpe2fs /dev/md3 | tail" shows that the last block group has the
> > ITABLE_ZEROED flag set. For benchmarking purposes on a scratch
> > workload, option (a) above is the fast thing to do.
> >
>
> Thank you Ted, I followed this and got the same result (read IOPS ~950
> / write IOPS ~100)
>
> > #2) It could be that the file system is choosing blocks farther away
> > from the beginning of the disk, which is slower, whereas the fio on
> > the raw disk will use the blocks closest to the beginning of the disk,
> > which are the fastest one. You could try creating the file system so
> > it is only 10GB, and then try running fio on that small, truncated
> > file system, and see if that makes a difference.
>
> I created LVM on top of the RAID10 device, and then created a smaller LV(20GB),
> after that I took benchmarks against the very same LV with different
> filesystems, the
> results are interesting:
>
> xfs (read IOPS ~1700 / write IOPS ~200)
> ext4 (read IOPS ~950 / write IOPS ~100)
> ext3( read IOPS ~900 / write IOPS ~100)
> reisferfs (read IOPS ~930 / write IOPS ~100)
> btrfs (read IOPS ~1200 / write IOPS ~120)
>
> I got very bad performance from XFS
> (http://www.spinics.net/lists/xfs/msg08688.html) about
> two months ago, which was caused by known bugs of XFS, then I tried
> ext4 on some of
> my servers, it works very well until I got a new server set up with soft RAID10.
>
> What should I learn to understand what's happening? any suggestion is
> appreciated.
>
> --
> Xupeng Yun
> http://about.me/xupeng
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
