From: Alexey Dobriyan <adobriyan@xxxxxxxxx> Use fs/*/Kconfig more, which is good because everything related to one filesystem is in one place and fs/Kconfig is quite fat. Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx> Cc: <linux-ext4@xxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- fs/Kconfig | 58 ++------------------------------------- fs/ext2/Kconfig | 55 +++++++++++++++++++++++++++++++++++++ fs/ext3/Kconfig | 67 ++++++++++++++++++++++++++++++++++++++++++++++ fs/ext4/Kconfig | 65 ++++++++++++++++++++++++++++++++++++++++++++ fs/jbd/Kconfig | 31 +++++++++++++++++++++ fs/jbd2/Kconfig | 32 +++++++++++++++++++++ 6 files changed, 253 insertions(+), 55 deletions(-) diff -puN fs/Kconfig~fs-kconfig-move-ext2-ext3-ext4-jbd-jbd2-out fs/Kconfig --- a/fs/Kconfig~fs-kconfig-move-ext2-ext3-ext4-jbd-jbd2-out +++ a/fs/Kconfig @@ -6,61 +6,9 @@ menu "File systems" if BLOCK -config EXT2_FS - tristate "Second extended fs support" - help - Ext2 is a standard Linux file system for hard disks. - - To compile this file system support as a module, choose M here: the - module will be called ext2. - - If unsure, say Y. - -config EXT2_FS_XATTR - bool "Ext2 extended attributes" - depends on EXT2_FS - help - Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - <http://acl.bestbits.at/> for details). - - If unsure, say N. - -config EXT2_FS_POSIX_ACL - bool "Ext2 POSIX Access Control Lists" - depends on EXT2_FS_XATTR - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website <http://acl.bestbits.at/>. - - If you don't know what Access Control Lists are, say N - -config EXT2_FS_SECURITY - bool "Ext2 Security Labels" - depends on EXT2_FS_XATTR - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the ext2 filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. - -config EXT2_FS_XIP - bool "Ext2 execute in place support" - depends on EXT2_FS && MMU - help - Execute in place can be used on memory-backed block devices. If you - enable this option, you can select to mount block devices which are - capable of this feature without using the page cache. - - If you do not use a block device that is capable of using this, - or if unsure, say N. +source "fs/ext2/Kconfig" +source "fs/ext3/Kconfig" +source "fs/ext4/Kconfig" config FS_XIP # execute in place diff -puN /dev/null fs/ext2/Kconfig --- /dev/null +++ a/fs/ext2/Kconfig @@ -0,0 +1,55 @@ +config EXT2_FS + tristate "Second extended fs support" + help + Ext2 is a standard Linux file system for hard disks. + + To compile this file system support as a module, choose M here: the + module will be called ext2. + + If unsure, say Y. + +config EXT2_FS_XATTR + bool "Ext2 extended attributes" + depends on EXT2_FS + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + <http://acl.bestbits.at/> for details). + + If unsure, say N. + +config EXT2_FS_POSIX_ACL + bool "Ext2 POSIX Access Control Lists" + depends on EXT2_FS_XATTR + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website <http://acl.bestbits.at/>. + + If you don't know what Access Control Lists are, say N + +config EXT2_FS_SECURITY + bool "Ext2 Security Labels" + depends on EXT2_FS_XATTR + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the ext2 filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. + +config EXT2_FS_XIP + bool "Ext2 execute in place support" + depends on EXT2_FS && MMU + help + Execute in place can be used on memory-backed block devices. If you + enable this option, you can select to mount block devices which are + capable of this feature without using the page cache. + + If you do not use a block device that is capable of using this, + or if unsure, say N. diff -puN /dev/null fs/ext3/Kconfig --- /dev/null +++ a/fs/ext3/Kconfig @@ -0,0 +1,67 @@ +config EXT3_FS + tristate "Ext3 journalling file system support" + select JBD + help + This is the journalling version of the Second extended file system + (often called ext3), the de facto standard Linux file system + (method to organize files on a storage device) for hard disks. + + The journalling code included in this driver means you do not have + to run e2fsck (file system checker) on your file systems after a + crash. The journal keeps track of any changes that were being made + at the time the system crashed, and can ensure that your file system + is consistent without the need for a lengthy check. + + Other than adding the journal to the file system, the on-disk format + of ext3 is identical to ext2. It is possible to freely switch + between using the ext3 driver and the ext2 driver, as long as the + file system has been cleanly unmounted, or e2fsck is run on the file + system. + + To add a journal on an existing ext2 file system or change the + behavior of ext3 file systems, you can use the tune2fs utility ("man + tune2fs"). To modify attributes of files and directories on ext3 + file systems, use chattr ("man chattr"). You need to be using + e2fsprogs version 1.20 or later in order to create ext3 journals + (available at <http://sourceforge.net/projects/e2fsprogs/>). + + To compile this file system support as a module, choose M here: the + module will be called ext3. + +config EXT3_FS_XATTR + bool "Ext3 extended attributes" + depends on EXT3_FS + default y + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + <http://acl.bestbits.at/> for details). + + If unsure, say N. + + You need this for POSIX ACL support on ext3. + +config EXT3_FS_POSIX_ACL + bool "Ext3 POSIX Access Control Lists" + depends on EXT3_FS_XATTR + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website <http://acl.bestbits.at/>. + + If you don't know what Access Control Lists are, say N + +config EXT3_FS_SECURITY + bool "Ext3 Security Labels" + depends on EXT3_FS_XATTR + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the ext3 filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. diff -puN /dev/null fs/ext4/Kconfig --- /dev/null +++ a/fs/ext4/Kconfig @@ -0,0 +1,65 @@ +config EXT4DEV_FS + tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)" + depends on EXPERIMENTAL + select JBD2 + select CRC16 + help + Ext4dev is a predecessor filesystem of the next generation + extended fs ext4, based on ext3 filesystem code. It will be + renamed ext4 fs later, once ext4dev is mature and stabilized. + + Unlike the change from ext2 filesystem to ext3 filesystem, + the on-disk format of ext4dev is not the same as ext3 any more: + it is based on extent maps and it supports 48-bit physical block + numbers. These combined on-disk format changes will allow + ext4dev/ext4 to handle more than 16 TB filesystem volumes -- + a hard limit that ext3 cannot overcome without changing the + on-disk format. + + Other than extent maps and 48-bit block numbers, ext4dev also is + likely to have other new features such as persistent preallocation, + high resolution time stamps, and larger file support etc. These + features will be added to ext4dev gradually. + + To compile this file system support as a module, choose M here. The + module will be called ext4dev. + + If unsure, say N. + +config EXT4DEV_FS_XATTR + bool "Ext4dev extended attributes" + depends on EXT4DEV_FS + default y + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + <http://acl.bestbits.at/> for details). + + If unsure, say N. + + You need this for POSIX ACL support on ext4dev/ext4. + +config EXT4DEV_FS_POSIX_ACL + bool "Ext4dev POSIX Access Control Lists" + depends on EXT4DEV_FS_XATTR + select FS_POSIX_ACL + help + POSIX Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the POSIX ACLs for + Linux website <http://acl.bestbits.at/>. + + If you don't know what Access Control Lists are, say N + +config EXT4DEV_FS_SECURITY + bool "Ext4dev Security Labels" + depends on EXT4DEV_FS_XATTR + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the ext4dev/ext4 filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. diff -puN /dev/null fs/jbd/Kconfig --- /dev/null +++ a/fs/jbd/Kconfig @@ -0,0 +1,31 @@ +config JBD + tristate + help + This is a generic journalling layer for block devices. It is + currently used by the ext3 and OCFS2 file systems, but it could + also be used to add journal support to other file systems or block + devices such as RAID or LVM. + + If you are using the ext3 or OCFS2 file systems, you need to + say Y here. If you are not using ext3 OCFS2 then you will probably + want to say N. + + To compile this device as a module, choose M here: the module will be + called jbd. If you are compiling ext3 or OCFS2 into the kernel, + you cannot compile this code as a module. + +config JBD_DEBUG + bool "JBD (ext3) debugging support" + depends on JBD && DEBUG_FS + help + If you are using the ext3 journaled file system (or potentially any + other file system/device using JBD), this option allows you to + enable debugging output while the system is running, in order to + help track down any problems you are having. By default the + debugging output will be turned off. + + If you select Y here, then you will be able to turn on debugging + with "echo N > /sys/kernel/debug/jbd/jbd-debug", where N is a + number between 1 and 5, the higher the number, the more debugging + output is generated. To turn debugging off again, do + "echo 0 > /sys/kernel/debug/jbd/jbd-debug". diff -puN /dev/null fs/jbd2/Kconfig --- /dev/null +++ a/fs/jbd2/Kconfig @@ -0,0 +1,32 @@ +config JBD2 + tristate + select CRC32 + help + This is a generic journaling layer for block devices that support + both 32-bit and 64-bit block numbers. It is currently used by + the ext4dev/ext4 filesystem, but it could also be used to add + journal support to other file systems or block devices such + as RAID or LVM. + + If you are using ext4dev/ext4, you need to say Y here. If you are not + using ext4dev/ext4 then you will probably want to say N. + + To compile this device as a module, choose M here. The module will be + called jbd2. If you are compiling ext4dev/ext4 into the kernel, + you cannot compile this code as a module. + +config JBD2_DEBUG + bool "JBD2 (ext4dev/ext4) debugging support" + depends on JBD2 && DEBUG_FS + help + If you are using the ext4dev/ext4 journaled file system (or + potentially any other filesystem/device using JBD2), this option + allows you to enable debugging output while the system is running, + in order to help track down any problems you are having. + By default, the debugging output will be turned off. + + If you select Y here, then you will be able to turn on debugging + with "echo N > /sys/kernel/debug/jbd2/jbd2-debug", where N is a + number between 1 and 5. The higher the number, the more debugging + output is generated. To turn debugging off again, do + "echo 0 > /sys/kernel/debug/jbd2/jbd2-debug". _ -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
