streaming read and write - test results

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nick Dokos writes:
 > If you have suggestions for
 > improvements, I'd be very interested in hearing them.
[...]
 > o 8 MSA1000 RAID controllers, each with four back-end SCSI busses, each
 > bus with 7 300GB 15K disks. Only one bus on each controller is used for
 > the tests below (the rest are going to be used for larger filesystem
 > testing). The 7 disks are striped ("horizontally" @ 128KB stripe size) at
 > the hardware level and exported as a single 2TB LUN (that's the current
 > hardware LUN size limit).

You may want to test one LUN without filesystem,
for example with zcav from bonnie++
(http://www.coker.com.au/bonnie++/zcav/).
Then the 8 together.

This way you have some points of comparison (for ext4 as well as other
filesystems) at a lower level.

-- 
solofo


--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Reiser Filesystem Development]     [Ceph FS]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite National Park]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]     [Linux Media]

  Powered by Linux