On Tue, Apr 22, 2008 at 05:27:51PM -0500, Jose R. Santos wrote: > > Let's stay with 16 then for now. Spindle speed doesn't actually > > matter here; what matters is seek speed, and the density of the disk > > Well higher spindle speed affect cylinder seek times which affect > overall seek time, which is why I think it should be tested as well. Well, I looked at some laptop drives with spindle speeds of 4200rpm, 5400rpm, and 7200rpm, and they have an average read/write seek time of of 10.5/12.5ms. Comparing Western Digital's current enterprise disk drives (the RE-2) which are 7200rpm, and their Enterprise "Green Power" drives (the RE2-GP) which try to hide the fact that their disks are 5400RPM, but which web sites have outed by using doing a frequency analysis of its acoustic output --- both have the same read/write seek time of 8.9ms. Interestingly, some of the older disks have faster seek times (i.e., 4ms), at the same disk platters, and I doubt it's because hard drive head positioning motors have gotten slower; rather, it's probably that as the platter density has increased, the time to position the hard drive heads is what's taking longer. Something that would be interesting to do is to do some experiments measuring small seeks (i.e., within a 1 gigabyte or so), and long seeks (i.e., across 10-20% and 50% of the disk drive). The difference between those two times is what's probably driving your flex_bg performance numbers, and it might be easier simply to measure that directly. - Ted -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
