On Tue, 2006-11-07 at 11:47 -0800, Andrew Morton wrote: > Why is ext3 slow?? Allocation? I don't see anything indicating that Bill is overwriting an existing file, so there is block allocation and journaling overhead. If that's the case, it would be interesting to see how fast ext3 is when overwriting a file. Extents and delayed allocation should improve on this a lot. > Begin forwarded message: > > Date: Tue, 7 Nov 2006 09:47:17 -0500 > From: "Bill Rugolsky Jr." <brugolsky@xxxxxxxxxxxxxxxxxxxxxxxxx> > To: Arne Schmitz <arne.schmitz@xxxxxxx> > Cc: linux-ide-arrays@xxxxxxxxxxxxxxxxx > Subject: Re: ICP, 3ware, Areca? > > > On Tue, Nov 07, 2006 at 03:25:04PM +0100, Arne Schmitz wrote: > > Has anyone information about how current ICP and Areca hardware performs under > > Linux? We are currently running kernel 2.6.17 and have two offers, one with > > an Areca ARC-1220 8-port, and one with an ICP 9087MA 8-port. Does either of > > them make trouble running a (64 bit) Linux? > > > > At the moment we only have two 3ware controllers running on 32 bit Linux. > > On Fri, 18 Aug 2006, I wrote to the list: > > I've been doing sequential raw disk I/O testing with both Jens Axboe's > "fio" using libaio and iodepths up to 32, as well as a basic > "dd if=/dev/zero oflag=direct". > > Reads look fine; a zone read test shows 360 MiB/s at the start of the disk, > 190 MiB/s at the end. I see similarly high numbers doing direct reads via > ext3. This would indicate that indirect block lookups themselves aren't a problem. > Summary: > > Raw partition: 228 MiB/s > XFS: 228 MiB/s > Ext3: 139-151 MiB/s -- David Kleikamp IBM Linux Technology Center - To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
