[PATCH RFC v3 net-next 11/13] bridge: No DEV_PATH_BR_VLAN_UNTAG_HW for dsa foreign

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In network setup as below:

             fastpath bypass
 .----------------------------------------.
/                                          \
|                        IP - forwarding    |
|                       /                \  v
|                      /                  wan ...
|                     /
|                     |
|                     |
|                   brlan.1
|                     |
|    +-------------------------------+
|    |           vlan 1              |
|    |                               |
|    |     brlan (vlan-filtering)    |
|    |               +---------------+
|    |               |  DSA-SWITCH   |
|    |    vlan 1     |               |
|    |      to       |               |
|    |   untagged    1     vlan 1    |
|    +---------------+---------------+
.         /                   \
 ----->wlan1                 lan0
       .                       .
       .                       ^
       ^                     vlan 1 tagged packets
     untagged packets

br_vlan_fill_forward_path_mode() sets DEV_PATH_BR_VLAN_UNTAG_HW when
filling in from brlan.1 towards wlan1. But it should be set to
DEV_PATH_BR_VLAN_UNTAG in this case. Using BR_VLFLAG_ADDED_BY_SWITCHDEV
is not correct. The dsa switchdev adds it as a foreign port.

The same problem for all foreignly added dsa vlans on the bridge.

First add the vlan, trying only native devices.
If this fails, we know this may be a vlan from a foreign device.

Use BR_VLFLAG_TAGGING_BY_SWITCHDEV to make sure DEV_PATH_BR_VLAN_UNTAG_HW
is set only when there if no foreign device involved.

Signed-off-by: Eric Woudstra <ericwouds@xxxxxxxxx>
---
 include/net/switchdev.h   |  1 +
 net/bridge/br_private.h   |  3 +++
 net/bridge/br_switchdev.c | 15 +++++++++++++++
 net/bridge/br_vlan.c      |  7 ++++++-
 net/switchdev/switchdev.c |  2 +-
 5 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/include/net/switchdev.h b/include/net/switchdev.h
index 8346b0d29542..ee500706496b 100644
--- a/include/net/switchdev.h
+++ b/include/net/switchdev.h
@@ -15,6 +15,7 @@
 #define SWITCHDEV_F_NO_RECURSE		BIT(0)
 #define SWITCHDEV_F_SKIP_EOPNOTSUPP	BIT(1)
 #define SWITCHDEV_F_DEFER		BIT(2)
+#define SWITCHDEV_F_NO_FOREIGN		BIT(3)
 
 enum switchdev_attr_id {
 	SWITCHDEV_ATTR_ID_UNDEFINED,
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 046d7b04771f..977285925422 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -180,6 +180,7 @@ enum {
 	BR_VLFLAG_MCAST_ENABLED = BIT(2),
 	BR_VLFLAG_GLOBAL_MCAST_ENABLED = BIT(3),
 	BR_VLFLAG_NEIGH_SUPPRESS_ENABLED = BIT(4),
+	BR_VLFLAG_TAGGING_BY_SWITCHDEV = BIT(5),
 };
 
 /**
@@ -2175,6 +2176,8 @@ void br_switchdev_mdb_notify(struct net_device *dev,
 			     int type);
 int br_switchdev_port_vlan_add(struct net_device *dev, u16 vid, u16 flags,
 			       bool changed, struct netlink_ext_ack *extack);
+int br_switchdev_port_vlan_no_foreign_add(struct net_device *dev, u16 vid, u16 flags,
+					  bool changed, struct netlink_ext_ack *extack);
 int br_switchdev_port_vlan_del(struct net_device *dev, u16 vid);
 void br_switchdev_init(struct net_bridge *br);
 
diff --git a/net/bridge/br_switchdev.c b/net/bridge/br_switchdev.c
index 7b41ee8740cb..efa7a055b8f9 100644
--- a/net/bridge/br_switchdev.c
+++ b/net/bridge/br_switchdev.c
@@ -187,6 +187,21 @@ int br_switchdev_port_vlan_add(struct net_device *dev, u16 vid, u16 flags,
 	return switchdev_port_obj_add(dev, &v.obj, extack);
 }
 
+int br_switchdev_port_vlan_no_foreign_add(struct net_device *dev, u16 vid, u16 flags,
+					  bool changed, struct netlink_ext_ack *extack)
+{
+	struct switchdev_obj_port_vlan v = {
+		.obj.orig_dev = dev,
+		.obj.id = SWITCHDEV_OBJ_ID_PORT_VLAN,
+		.obj.flags = SWITCHDEV_F_NO_FOREIGN,
+		.flags = flags,
+		.vid = vid,
+		.changed = changed,
+	};
+
+	return switchdev_port_obj_add(dev, &v.obj, extack);
+}
+
 int br_switchdev_port_vlan_del(struct net_device *dev, u16 vid)
 {
 	struct switchdev_obj_port_vlan v = {
diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c
index 2ea1e2ff4676..0decce5d586a 100644
--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -109,6 +109,11 @@ static int __vlan_vid_add(struct net_device *dev, struct net_bridge *br,
 	/* Try switchdev op first. In case it is not supported, fallback to
 	 * 8021q add.
 	 */
+	err = br_switchdev_port_vlan_no_foreign_add(dev, v->vid, flags, false, extack);
+	if (err != -EOPNOTSUPP) {
+		v->priv_flags |= BR_VLFLAG_ADDED_BY_SWITCHDEV | BR_VLFLAG_TAGGING_BY_SWITCHDEV;
+		return err;
+	}
 	err = br_switchdev_port_vlan_add(dev, v->vid, flags, false, extack);
 	if (err == -EOPNOTSUPP)
 		return vlan_vid_add(dev, br->vlan_proto, v->vid);
@@ -1491,7 +1496,7 @@ int br_vlan_fill_forward_path_mode(struct net_bridge *br,
 
 	if (path->bridge.vlan_mode == DEV_PATH_BR_VLAN_TAG)
 		path->bridge.vlan_mode = DEV_PATH_BR_VLAN_KEEP;
-	else if (v->priv_flags & BR_VLFLAG_ADDED_BY_SWITCHDEV)
+	else if (v->priv_flags & BR_VLFLAG_TAGGING_BY_SWITCHDEV)
 		path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG_HW;
 	else
 		path->bridge.vlan_mode = DEV_PATH_BR_VLAN_UNTAG;
diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c
index 6488ead9e464..c48f66643e99 100644
--- a/net/switchdev/switchdev.c
+++ b/net/switchdev/switchdev.c
@@ -749,7 +749,7 @@ static int __switchdev_handle_port_obj_add(struct net_device *dev,
 	/* Event is neither on a bridge nor a LAG. Check whether it is on an
 	 * interface that is in a bridge with us.
 	 */
-	if (!foreign_dev_check_cb)
+	if (!foreign_dev_check_cb || port_obj_info->obj->flags & SWITCHDEV_F_NO_FOREIGN)
 		return err;
 
 	br = netdev_master_upper_dev_get(dev);
-- 
2.47.1





[Index of Archives]     [Netdev]     [AoE Tools]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]     [Video 4 Linux]

  Powered by Linux