Add test cases to verify the behavior of the MDB bulk deletion
functionality in the bridge driver.
Signed-off-by: Ido Schimmel <idosch@xxxxxxxxxx>
Acked-by: Petr Machata <petrm@xxxxxxxxxx>
---
.../selftests/net/forwarding/bridge_mdb.sh | 191 +++++++++++++++++-
1 file changed, 189 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb.sh b/tools/testing/selftests/net/forwarding/bridge_mdb.sh
index e4e3e9405056..61348f71728c 100755
--- a/tools/testing/selftests/net/forwarding/bridge_mdb.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_mdb.sh
@@ -803,11 +803,198 @@ cfg_test_dump()
cfg_test_dump_common "L2" l2_grps_get
}
+# Check flush functionality with different parameters.
+cfg_test_flush()
+{
+ local num_entries
+
+ # Add entries with different attributes and check that they are all
+ # flushed when the flush command is given with no parameters.
+
+ # Different port.
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.1 vid 10
+ bridge mdb add dev br0 port $swp2 grp 239.1.1.2 vid 10
+
+ # Different VLAN ID.
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.3 vid 10
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.4 vid 20
+
+ # Different routing protocol.
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.5 vid 10 proto bgp
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.6 vid 10 proto zebra
+
+ # Different state.
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.7 vid 10 permanent
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.8 vid 10 temp
+
+ bridge mdb flush dev br0
+ num_entries=$(bridge mdb show dev br0 | wc -l)
+ [[ $num_entries -eq 0 ]]
+ check_err $? 0 "Not all entries flushed after flush all"
+
+ # Check that when flushing by port only entries programmed with the
+ # specified port are flushed and the rest are not.
+
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.1 vid 10
+ bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 10
+ bridge mdb add dev br0 port br0 grp 239.1.1.1 vid 10
+
+ bridge mdb flush dev br0 port $swp1
+
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1"
+ check_fail $? "Entry not flushed by specified port"
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp2"
+ check_err $? "Entry flushed by wrong port"
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port br0"
+ check_err $? "Host entry flushed by wrong port"
+
+ bridge mdb flush dev br0 port br0
+
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port br0"
+ check_fail $? "Host entry not flushed by specified port"
+
+ bridge mdb flush dev br0
+
+ # Check that when flushing by VLAN ID only entries programmed with the
+ # specified VLAN ID are flushed and the rest are not.
+
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.1 vid 10
+ bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 10
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.1 vid 20
+ bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 20
+
+ bridge mdb flush dev br0 vid 10
+
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null
+ check_fail $? "Entry not flushed by specified VLAN ID"
+ bridge mdb get dev br0 grp 239.1.1.1 vid 20 &> /dev/null
+ check_err $? "Entry flushed by wrong VLAN ID"
+
+ bridge mdb flush dev br0
+
+ # Check that all permanent entries are flushed when "permanent" is
+ # specified and that temporary entries are not.
+
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.1 permanent vid 10
+ bridge mdb add dev br0 port $swp2 grp 239.1.1.1 temp vid 10
+
+ bridge mdb flush dev br0 permanent
+
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1"
+ check_fail $? "Entry not flushed by \"permanent\" state"
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp2"
+ check_err $? "Entry flushed by wrong state (\"permanent\")"
+
+ bridge mdb flush dev br0
+
+ # Check that all temporary entries are flushed when "nopermanent" is
+ # specified and that permanent entries are not.
+
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.1 permanent vid 10
+ bridge mdb add dev br0 port $swp2 grp 239.1.1.1 temp vid 10
+
+ bridge mdb flush dev br0 nopermanent
+
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1"
+ check_err $? "Entry flushed by wrong state (\"nopermanent\")"
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp2"
+ check_fail $? "Entry not flushed by \"nopermanent\" state"
+
+ bridge mdb flush dev br0
+
+ # Check that L2 host entries are not flushed when "nopermanent" is
+ # specified, but flushed when "permanent" is specified.
+
+ bridge mdb add dev br0 port br0 grp 01:02:03:04:05:06 permanent vid 10
+
+ bridge mdb flush dev br0 nopermanent
+
+ bridge mdb get dev br0 grp 01:02:03:04:05:06 vid 10 &> /dev/null
+ check_err $? "L2 host entry flushed by wrong state (\"nopermanent\")"
+
+ bridge mdb flush dev br0 permanent
+
+ bridge mdb get dev br0 grp 01:02:03:04:05:06 vid 10 &> /dev/null
+ check_fail $? "L2 host entry not flushed by \"permanent\" state"
+
+ bridge mdb flush dev br0
+
+ # Check that IPv4 host entries are not flushed when "permanent" is
+ # specified, but flushed when "nopermanent" is specified.
+
+ bridge mdb add dev br0 port br0 grp 239.1.1.1 temp vid 10
+
+ bridge mdb flush dev br0 permanent
+
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null
+ check_err $? "IPv4 host entry flushed by wrong state (\"permanent\")"
+
+ bridge mdb flush dev br0 nopermanent
+
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null
+ check_fail $? "IPv4 host entry not flushed by \"nopermanent\" state"
+
+ bridge mdb flush dev br0
+
+ # Check that IPv6 host entries are not flushed when "permanent" is
+ # specified, but flushed when "nopermanent" is specified.
+
+ bridge mdb add dev br0 port br0 grp ff0e::1 temp vid 10
+
+ bridge mdb flush dev br0 permanent
+
+ bridge mdb get dev br0 grp ff0e::1 vid 10 &> /dev/null
+ check_err $? "IPv6 host entry flushed by wrong state (\"permanent\")"
+
+ bridge mdb flush dev br0 nopermanent
+
+ bridge mdb get dev br0 grp ff0e::1 vid 10 &> /dev/null
+ check_fail $? "IPv6 host entry not flushed by \"nopermanent\" state"
+
+ bridge mdb flush dev br0
+
+ # Check that when flushing by routing protocol only entries programmed
+ # with the specified routing protocol are flushed and the rest are not.
+
+ bridge mdb add dev br0 port $swp1 grp 239.1.1.1 vid 10 proto bgp
+ bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 10 proto zebra
+ bridge mdb add dev br0 port br0 grp 239.1.1.1 vid 10
+
+ bridge mdb flush dev br0 proto bgp
+
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1"
+ check_fail $? "Entry not flushed by specified routing protocol"
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp2"
+ check_err $? "Entry flushed by wrong routing protocol"
+ bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port br0"
+ check_err $? "Host entry flushed by wrong routing protocol"
+
+ bridge mdb flush dev br0
+
+ # Test that an error is returned when trying to flush using unsupported
+ # parameters.
+
+ bridge mdb flush dev br0 src_vni 10 &> /dev/null
+ check_fail $? "Managed to flush by source VNI"
+
+ bridge mdb flush dev br0 dst 198.51.100.1 &> /dev/null
+ check_fail $? "Managed to flush by destination IP"
+
+ bridge mdb flush dev br0 dst_port 4789 &> /dev/null
+ check_fail $? "Managed to flush by UDP destination port"
+
+ bridge mdb flush dev br0 vni 10 &> /dev/null
+ check_fail $? "Managed to flush by destination VNI"
+
+ log_test "Flush tests"
+}
+
cfg_test()
{
cfg_test_host
cfg_test_port
cfg_test_dump
+ cfg_test_flush
}
__fwd_test_host_ip()
@@ -1166,8 +1353,8 @@ ctrl_test()
ctrl_mldv2_is_in_test
}
-if ! bridge mdb help 2>&1 | grep -q "get"; then
- echo "SKIP: iproute2 too old, missing bridge mdb get support"
+if ! bridge mdb help 2>&1 | grep -q "flush"; then
+ echo "SKIP: iproute2 too old, missing bridge mdb flush support"
exit $ksft_skip
fi
--
2.40.1
