On Sat, Mar 18, 2023 at 03:10:10PM +0100, Hans J. Schultz wrote:
> +# Test of dynamic FDB entries.
> +locked_port_dyn_fdb()
> +{
> + local mac=00:01:02:03:04:05
> + local ageing_time
> +
> + RET=0
> + ageing_time=$(bridge_ageing_time_get br0)
> + tc qdisc add dev $swp2 clsact
> + ip link set dev br0 type bridge ageing_time $LOW_AGEING_TIME
> + bridge link set dev $swp1 learning on locked on
> +
> + bridge fdb replace $mac dev $swp1 master dynamic
> + tc filter add dev $swp2 egress protocol ip pref 1 handle 1 flower \
> + dst_ip 192.0.2.2 ip_proto udp dst_port 12345 action pass
> +
> + $MZ $swp1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
> + -a $mac -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
Packets should be injected via $h1, not $swp1. See other test cases in
this file.
> + tc_check_packets "dev $swp2 egress" 1 1
> + check_err $? "Packet not seen on egress after adding dynamic FDB"
Does this actually work? The packet is transmitted via $swp1, I don't
understand how it can arrive at the egress of $swp2.
> +
> + sleep $((LOW_AGEING_TIME / 100 + 10))
> +
> + $MZ $swp1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
> + -a $mac -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
> + tc_check_packets "dev $swp2 egress" 1 1
> + check_fail $? "Dynamic FDB entry did not age out"
Shouldn't this be check_err()? After the FDB entry was aged you want to
make sure that packets received via $swp1 with SMAC being $mac are no
longer forwarded by the bridge.
Also, I suggest executing 'bridge fdb get' to make sure the entry is no
longer present in the bridge FDB.
> +
> + ip link set dev br0 type bridge ageing_time $ageing_time
> + bridge link set dev $swp1 learning off locked off
> + tc qdisc del dev $swp2 clsact
> +
> + log_test "Locked port dyn FDB"
> +}
> +
> trap cleanup EXIT
>
> setup_prepare
> --
> 2.34.1
>
