Add a suite covering mcast_n_groups and mcast_max_groups bridge features.
Signed-off-by: Petr Machata <petrm@xxxxxxxxxx>
---
Notes:
v2:
- Adjust the tests that check setting max below n and
reset of max on VLAN snooping enablement
- Make test naming uniform
- Enable testing of control path (IGMP/MLD) in
mcast_vlan_snooping bridge
- Reorganize the code so that test instances (per bridge
type and configuration type) always come right after
the test, in order of {d,q,qvs}{4,6}{cfg,ctl}.
Then groups of selftests are at the end of the file.
Similarly adjust invocation order of the tests.
.../testing/selftests/net/forwarding/Makefile | 1 +
.../net/forwarding/bridge_mdb_max.sh | 1336 +++++++++++++++++
2 files changed, 1337 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/bridge_mdb_max.sh
diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile
index 453ae006fbcf..91201ab3c4fc 100644
--- a/tools/testing/selftests/net/forwarding/Makefile
+++ b/tools/testing/selftests/net/forwarding/Makefile
@@ -4,6 +4,7 @@ TEST_PROGS = bridge_igmp.sh \
bridge_locked_port.sh \
bridge_mdb.sh \
bridge_mdb_host.sh \
+ bridge_mdb_max.sh \
bridge_mdb_port_down.sh \
bridge_mld.sh \
bridge_port_isolation.sh \
diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb_max.sh b/tools/testing/selftests/net/forwarding/bridge_mdb_max.sh
new file mode 100755
index 000000000000..ae255b662ba3
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_mdb_max.sh
@@ -0,0 +1,1336 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+ +------------------------+
+# | H1 (vrf) | | H2 (vrf) |
+# | + $h1.10 | | + $h2.10 |
+# | | 192.0.2.1/28 | | | 192.0.2.2/28 |
+# | | 2001:db8:1::1/64 | | | 2001:db8:1::2/64 |
+# | | | | | |
+# | | + $h1.20 | | | + $h2.20 |
+# | \ | 198.51.100.1/24 | | \ | 198.51.100.2/24 |
+# | \ | 2001:db8:2::1/64 | | \ | 2001:db8:2::2/64 |
+# | \| | | \| |
+# | + $h1 | | + $h2 |
+# +----|------------------+ +----|-------------------+
+# | |
+# +----|--------------------------------------------------|-------------------+
+# | SW | | |
+# | +--|--------------------------------------------------|-----------------+ |
+# | | + $swp1 BR0 (802.1q) + $swp2 | |
+# | | vid 10 vid 10 | |
+# | | vid 20 vid 20 | |
+# | | | |
+# | +-----------------------------------------------------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+ test_8021d
+ test_8021q
+ test_8021qvs
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+ simple_if_init $h1
+ vlan_create $h1 10 v$h1 192.0.2.1/28 2001:db8:1::1/64
+ vlan_create $h1 20 v$h1 198.51.100.1/24 2001:db8:2::1/64
+}
+
+h1_destroy()
+{
+ vlan_destroy $h1 20
+ vlan_destroy $h1 10
+ simple_if_fini $h1
+}
+
+h2_create()
+{
+ simple_if_init $h2
+ vlan_create $h2 10 v$h2 192.0.2.2/28
+ vlan_create $h2 20 v$h2 198.51.100.2/24
+}
+
+h2_destroy()
+{
+ vlan_destroy $h2 20
+ vlan_destroy $h2 10
+ simple_if_fini $h2
+}
+
+switch_create_8021d()
+{
+ log_info "802.1d tests"
+
+ ip link add name br0 type bridge vlan_filtering 0 \
+ mcast_snooping 1 \
+ mcast_igmp_version 3 mcast_mld_version 2
+ ip link set dev br0 up
+
+ ip link set dev $swp1 master br0
+ ip link set dev $swp1 up
+ bridge link set dev $swp1 fastleave on
+
+ ip link set dev $swp2 master br0
+ ip link set dev $swp2 up
+}
+
+switch_create_8021q()
+{
+ local br_flags=$1; shift
+
+ log_info "802.1q $br_flags${br_flags:+ }tests"
+
+ ip link add name br0 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+ mcast_snooping 1 $br_flags \
+ mcast_igmp_version 3 mcast_mld_version 2
+ bridge vlan add vid 10 dev br0 self
+ bridge vlan add vid 20 dev br0 self
+ ip link set dev br0 up
+
+ ip link set dev $swp1 master br0
+ ip link set dev $swp1 up
+ bridge link set dev $swp1 fastleave on
+ bridge vlan add vid 10 dev $swp1
+ bridge vlan add vid 20 dev $swp1
+
+ ip link set dev $swp2 master br0
+ ip link set dev $swp2 up
+ bridge vlan add vid 10 dev $swp2
+ bridge vlan add vid 20 dev $swp2
+}
+
+switch_create_8021qvs()
+{
+ switch_create_8021q "mcast_vlan_snooping 1"
+ bridge vlan global set dev br0 vid 10 mcast_igmp_version 3
+ bridge vlan global set dev br0 vid 10 mcast_mld_version 2
+ bridge vlan global set dev br0 vid 20 mcast_igmp_version 3
+ bridge vlan global set dev br0 vid 20 mcast_mld_version 2
+}
+
+switch_destroy()
+{
+ ip link set dev $swp2 down
+ ip link set dev $swp2 nomaster
+
+ ip link set dev $swp1 down
+ ip link set dev $swp1 nomaster
+
+ ip link set dev br0 down
+ ip link del dev br0
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp2=${NETIFS[p3]}
+ h2=${NETIFS[p4]}
+
+ vrf_prepare
+ forwarding_enable
+
+ h1_create
+ h2_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ switch_destroy 2>/dev/null
+ h2_destroy
+ h1_destroy
+
+ forwarding_restore
+ vrf_cleanup
+}
+
+cfg_src_list()
+{
+ local IPs=("$@")
+ local IPstr=$(echo ${IPs[@]} | tr '[:space:]' , | sed 's/,$//')
+
+ echo ${IPstr:+source_list }${IPstr}
+}
+
+cfg_group_op()
+{
+ local op=$1; shift
+ local locus=$1; shift
+ local GRP=$1; shift
+ local state=$1; shift
+ local IPs=("$@")
+
+ local source_list=$(cfg_src_list ${IPs[@]})
+
+ # Everything besides `bridge mdb' uses the "dev X vid Y" syntax,
+ # so we use it here as well and convert.
+ local br_locus=$(echo "$locus" | sed 's/^dev /port /')
+
+ bridge mdb $op dev br0 $br_locus grp $GRP $state \
+ filter_mode include $source_list
+}
+
+cfg4_entries_op()
+{
+ local op=$1; shift
+ local locus=$1; shift
+ local state=$1; shift
+ local n=$1; shift
+ local grp=${1:-1}; shift
+
+ local GRP=239.1.1.${grp}
+ local IPs=$(seq -f 192.0.2.%g 1 $((n - 1)))
+ cfg_group_op "$op" "$locus" "$GRP" "$state" ${IPs[@]}
+}
+
+cfg4_entries_add()
+{
+ cfg4_entries_op add "$@"
+}
+
+cfg4_entries_del()
+{
+ cfg4_entries_op del "$@"
+}
+
+cfg6_entries_op()
+{
+ local op=$1; shift
+ local locus=$1; shift
+ local state=$1; shift
+ local n=$1; shift
+ local grp=${1:-1}; shift
+
+ local GRP=ff0e::${grp}
+ local IPs=$(printf "2001:db8:1::%x\n" $(seq 1 $((n - 1))))
+ cfg_group_op "$op" "$locus" "$GRP" "$state" ${IPs[@]}
+}
+
+cfg6_entries_add()
+{
+ cfg6_entries_op add "$@"
+}
+
+cfg6_entries_del()
+{
+ cfg6_entries_op del "$@"
+}
+
+locus_dev_peer()
+{
+ local dev_kw=$1; shift
+ local dev=$1; shift
+ local vid_kw=$1; shift
+ local vid=$1; shift
+
+ echo "$h1.${vid:-10}"
+}
+
+locus_dev()
+{
+ local dev_kw=$1; shift
+ local dev=$1; shift
+
+ echo $dev
+}
+
+ctl4_entries_add()
+{
+ local locus=$1; shift
+ local state=$1; shift
+ local n=$1; shift
+ local grp=${1:-1}; shift
+
+ local IPs=$(seq -f 192.0.2.%g 1 $((n - 1)))
+ local peer=$(locus_dev_peer $locus)
+ local GRP=239.1.1.${grp}
+ $MZ $peer -c 1 -A 192.0.2.1 -B $GRP \
+ -t ip proto=2,p=$(igmpv3_is_in_get $GRP $IPs) -q
+ sleep 1
+
+ local nn=$(bridge mdb show dev br0 | grep $GRP | wc -l)
+ if ((nn != n)); then
+ echo mcast_max_groups > /dev/stderr
+ false
+ fi
+}
+
+ctl4_entries_del()
+{
+ local locus=$1; shift
+ local state=$1; shift
+ local n=$1; shift
+ local grp=${1:-1}; shift
+
+ local peer=$(locus_dev_peer $locus)
+ local GRP=239.1.1.${grp}
+ $MZ $peer -c 1 -A 192.0.2.1 -B 224.0.0.2 \
+ -t ip proto=2,p=$(igmpv2_leave_get $GRP) -q
+ sleep 1
+ ! bridge mdb show dev br0 | grep -q $GRP
+}
+
+ctl6_entries_add()
+{
+ local locus=$1; shift
+ local state=$1; shift
+ local n=$1; shift
+ local grp=${1:-1}; shift
+
+ local IPs=$(printf "2001:db8:1::%x\n" $(seq 1 $((n - 1))))
+ local peer=$(locus_dev_peer $locus)
+ local SIP=fe80::1
+ local GRP=ff0e::${grp}
+ local p=$(mldv2_is_in_get $SIP $GRP $IPs)
+ $MZ -6 $peer -c 1 -A $SIP -B $GRP -t ip hop=1,next=0,p="$p" -q
+ sleep 1
+
+ local nn=$(bridge mdb show dev br0 | grep $GRP | wc -l)
+ if ((nn != n)); then
+ echo mcast_max_groups > /dev/stderr
+ false
+ fi
+}
+
+ctl6_entries_del()
+{
+ local locus=$1; shift
+ local state=$1; shift
+ local n=$1; shift
+ local grp=${1:-1}; shift
+
+ local peer=$(locus_dev_peer $locus)
+ local SIP=fe80::1
+ local GRP=ff0e::${grp}
+ local p=$(mldv1_done_get $SIP $GRP)
+ $MZ -6 $peer -c 1 -A $SIP -B $GRP -t ip hop=1,next=0,p="$p" -q
+ sleep 1
+ ! bridge mdb show dev br0 | grep -q $GRP
+}
+
+bridge_maxgroups_errmsg_check_cfg()
+{
+ local msg=$1; shift
+ local needle=$1; shift
+
+ echo "$msg" | grep -q mcast_max_groups
+ check_err $? "Adding MDB entries failed for the wrong reason: $msg"
+}
+
+bridge_maxgroups_errmsg_check_cfg4()
+{
+ bridge_maxgroups_errmsg_check_cfg "$@"
+}
+
+bridge_maxgroups_errmsg_check_cfg6()
+{
+ bridge_maxgroups_errmsg_check_cfg "$@"
+}
+
+bridge_maxgroups_errmsg_check_ctl4()
+{
+ :
+}
+
+bridge_maxgroups_errmsg_check_ctl6()
+{
+ :
+}
+
+bridge_port_ngroups_get()
+{
+ local locus=$1; shift
+
+ bridge -j -d link show $locus |
+ jq '.[].mcast_n_groups'
+}
+
+bridge_port_maxgroups_get()
+{
+ local locus=$1; shift
+
+ bridge -j -d link show $locus |
+ jq '.[].mcast_max_groups'
+}
+
+bridge_port_maxgroups_set()
+{
+ local locus=$1; shift
+ local max=$1; shift
+
+ bridge link set dev $(locus_dev $locus) mcast_max_groups $max
+}
+
+bridge_port_vlan_ngroups_get()
+{
+ local locus=$1; shift
+
+ bridge -j -d vlan show $locus |
+ jq '.[].vlans[].mcast_n_groups'
+}
+
+bridge_port_vlan_maxgroups_get()
+{
+ local locus=$1; shift
+
+ bridge -j -d vlan show $locus |
+ jq '.[].vlans[].mcast_max_groups'
+}
+
+bridge_port_vlan_maxgroups_set()
+{
+ local locus=$1; shift
+ local max=$1; shift
+
+ bridge vlan set $locus mcast_max_groups $max
+}
+
+test_ngroups_reporting()
+{
+ local CFG=$1; shift
+ local context=$1; shift
+ local locus=$1; shift
+
+ RET=0
+
+ local n0=$(bridge_${context}_ngroups_get "$locus")
+ ${CFG}_entries_add "$locus" temp 5
+ check_err $? "Couldn't add MDB entries"
+ local n1=$(bridge_${context}_ngroups_get "$locus")
+
+ ((n1 == n0 + 5))
+ check_err $? "Number of groups was $n0, now is $n1, but $((n0 + 5)) expected"
+
+ ${CFG}_entries_del "$locus" temp 5
+ check_err $? "Couldn't delete MDB entries"
+ local n2=$(bridge_${context}_ngroups_get "$locus")
+
+ ((n2 == n0))
+ check_err $? "Number of groups was $n0, now is $n2, but should be back to $n0"
+
+ log_test "$CFG: $context: ngroups reporting"
+}
+
+test_8021d_ngroups_reporting_cfg4()
+{
+ test_ngroups_reporting cfg4 port "dev $swp1"
+}
+
+test_8021d_ngroups_reporting_ctl4()
+{
+ test_ngroups_reporting ctl4 port "dev $swp1"
+}
+
+test_8021d_ngroups_reporting_cfg6()
+{
+ test_ngroups_reporting cfg6 port "dev $swp1"
+}
+
+test_8021d_ngroups_reporting_ctl6()
+{
+ test_ngroups_reporting ctl6 port "dev $swp1"
+}
+
+test_8021q_ngroups_reporting_cfg4()
+{
+ test_ngroups_reporting cfg4 port "dev $swp1 vid 10"
+}
+
+test_8021q_ngroups_reporting_ctl4()
+{
+ test_ngroups_reporting ctl4 port "dev $swp1 vid 10"
+}
+
+test_8021q_ngroups_reporting_cfg6()
+{
+ test_ngroups_reporting cfg6 port "dev $swp1 vid 10"
+}
+
+test_8021q_ngroups_reporting_ctl6()
+{
+ test_ngroups_reporting ctl6 port "dev $swp1 vid 10"
+}
+
+test_8021qvs_ngroups_reporting_cfg4()
+{
+ test_ngroups_reporting cfg4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_ngroups_reporting_ctl4()
+{
+ test_ngroups_reporting ctl4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_ngroups_reporting_cfg6()
+{
+ test_ngroups_reporting cfg6 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_ngroups_reporting_ctl6()
+{
+ test_ngroups_reporting ctl6 port_vlan "dev $swp1 vid 10"
+}
+
+test_ngroups_cross_vlan()
+{
+ local CFG=$1; shift
+
+ local locus1="dev $swp1 vid 10"
+ local locus2="dev $swp1 vid 20"
+
+ RET=0
+
+ local n10=$(bridge_port_vlan_ngroups_get "$locus1")
+ local n20=$(bridge_port_vlan_ngroups_get "$locus2")
+ ${CFG}_entries_add "$locus1" temp 5 111
+ check_err $? "Couldn't add MDB entries to VLAN 10"
+ local n11=$(bridge_port_vlan_ngroups_get "$locus1")
+ local n21=$(bridge_port_vlan_ngroups_get "$locus2")
+
+ ((n11 == n10 + 5))
+ check_err $? "Number of groups at VLAN 10 was $n10, now is $n11, but 5 entries added on VLAN 10, $((n10 + 5)) expected"
+
+ ((n21 == n20))
+ check_err $? "Number of groups at VLAN 20 was $n20, now is $n21, but no change expected on VLAN 20"
+
+ ${CFG}_entries_add "$locus2" temp 5 112
+ check_err $? "Couldn't add MDB entries to VLAN 20"
+ local n12=$(bridge_port_vlan_ngroups_get "$locus1")
+ local n22=$(bridge_port_vlan_ngroups_get "$locus2")
+
+ ((n12 == n11))
+ check_err $? "Number of groups at VLAN 10 was $n11, now is $n12, but no change expected on VLAN 10"
+
+ ((n22 == n21 + 5))
+ check_err $? "Number of groups at VLAN 20 was $n21, now is $n22, but 5 entries added on VLAN 20, $((n21 + 5)) expected"
+
+ ${CFG}_entries_del "$locus1" temp 5 111
+ check_err $? "Couldn't delete MDB entries from VLAN 10"
+ ${CFG}_entries_del "$locus2" temp 5 112
+ check_err $? "Couldn't delete MDB entries from VLAN 20"
+ local n13=$(bridge_port_vlan_ngroups_get "$locus1")
+ local n23=$(bridge_port_vlan_ngroups_get "$locus2")
+
+ ((n13 == n10))
+ check_err $? "Number of groups at VLAN 10 was $n10, now is $n13, but should be back to $n10"
+
+ ((n23 == n20))
+ check_err $? "Number of groups at VLAN 20 was $n20, now is $n23, but should be back to $n20"
+
+ log_test "$CFG: port_vlan: isolation of port and per-VLAN ngroups"
+}
+
+test_8021qvs_ngroups_cross_vlan_cfg4()
+{
+ test_ngroups_cross_vlan cfg4
+}
+
+test_8021qvs_ngroups_cross_vlan_ctl4()
+{
+ test_ngroups_cross_vlan ctl4
+}
+
+test_8021qvs_ngroups_cross_vlan_cfg6()
+{
+ test_ngroups_cross_vlan cfg6
+}
+
+test_8021qvs_ngroups_cross_vlan_ctl6()
+{
+ test_ngroups_cross_vlan ctl6
+}
+
+test_maxgroups_zero()
+{
+ local CFG=$1; shift
+ local context=$1; shift
+ local locus=$1; shift
+
+ RET=0
+ local max
+
+ max=$(bridge_${context}_maxgroups_get "$locus")
+ ((max == 0))
+ check_err $? "Max groups on $locus should be 0, but $max reported"
+
+ bridge_${context}_maxgroups_set "$locus" 100
+ check_err $? "Failed to set max to 100"
+ max=$(bridge_${context}_maxgroups_get "$locus")
+ ((max == 100))
+ check_err $? "Max groups expected to be 100, but $max reported"
+
+ bridge_${context}_maxgroups_set "$locus" 0
+ check_err $? "Couldn't set maximum to 0"
+
+ # Test that setting 0 explicitly still serves as infinity.
+ ${CFG}_entries_add "$locus" temp 5
+ check_err $? "Adding 5 MDB entries failed but should have passed"
+ ${CFG}_entries_del "$locus" temp 5
+ check_err $? "Couldn't delete MDB entries"
+
+ log_test "$CFG: $context maxgroups: reporting and treatment of 0"
+}
+
+test_8021d_maxgroups_zero_cfg4()
+{
+ test_maxgroups_zero cfg4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_zero_ctl4()
+{
+ test_maxgroups_zero ctl4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_zero_cfg6()
+{
+ test_maxgroups_zero cfg6 port "dev $swp1"
+}
+
+test_8021d_maxgroups_zero_ctl6()
+{
+ test_maxgroups_zero ctl6 port "dev $swp1"
+}
+
+test_8021q_maxgroups_zero_cfg4()
+{
+ test_maxgroups_zero cfg4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_zero_ctl4()
+{
+ test_maxgroups_zero ctl4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_zero_cfg6()
+{
+ test_maxgroups_zero cfg6 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_zero_ctl6()
+{
+ test_maxgroups_zero ctl6 port "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_zero_cfg4()
+{
+ test_maxgroups_zero cfg4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_zero_ctl4()
+{
+ test_maxgroups_zero ctl4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_zero_cfg6()
+{
+ test_maxgroups_zero cfg6 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_zero_ctl6()
+{
+ test_maxgroups_zero ctl6 port_vlan "dev $swp1 vid 10"
+}
+
+test_maxgroups_zero_cross_vlan()
+{
+ local CFG=$1; shift
+
+ local locus0="dev $swp1"
+ local locus1="dev $swp1 vid 10"
+ local locus2="dev $swp1 vid 20"
+ local max
+
+ RET=0
+
+ bridge_port_vlan_maxgroups_set "$locus1" 100
+ check_err $? "$locus1: Failed to set max to 100"
+
+ max=$(bridge_port_maxgroups_get "$locus0")
+ ((max == 0))
+ check_err $? "$locus0: Max groups expected to be 0, but $max reported"
+
+ max=$(bridge_port_vlan_maxgroups_get "$locus2")
+ ((max == 0))
+ check_err $? "$locus2: Max groups expected to be 0, but $max reported"
+
+ bridge_port_vlan_maxgroups_set "$locus2" 100
+ check_err $? "$locus2: Failed to set max to 100"
+
+ max=$(bridge_port_maxgroups_get "$locus0")
+ ((max == 0))
+ check_err $? "$locus0: Max groups expected to be 0, but $max reported"
+
+ max=$(bridge_port_vlan_maxgroups_get "$locus2")
+ ((max == 100))
+ check_err $? "$locus2: Max groups expected to be 100, but $max reported"
+
+ bridge_port_maxgroups_set "$locus0" 100
+ check_err $? "$locus0: Failed to set max to 100"
+
+ max=$(bridge_port_maxgroups_get "$locus0")
+ ((max == 100))
+ check_err $? "$locus0: Max groups expected to be 100, but $max reported"
+
+ max=$(bridge_port_vlan_maxgroups_get "$locus2")
+ ((max == 100))
+ check_err $? "$locus2: Max groups expected to be 100, but $max reported"
+
+ bridge_port_vlan_maxgroups_set "$locus1" 0
+ check_err $? "$locus1: Failed to set max to 0"
+
+ max=$(bridge_port_maxgroups_get "$locus0")
+ ((max == 100))
+ check_err $? "$locus0: Max groups expected to be 100, but $max reported"
+
+ max=$(bridge_port_vlan_maxgroups_get "$locus2")
+ ((max == 100))
+ check_err $? "$locus2: Max groups expected to be 100, but $max reported"
+
+ bridge_port_vlan_maxgroups_set "$locus2" 0
+ check_err $? "$locus2: Failed to set max to 0"
+
+ max=$(bridge_port_maxgroups_get "$locus0")
+ ((max == 100))
+ check_err $? "$locus0: Max groups expected to be 100, but $max reported"
+
+ max=$(bridge_port_vlan_maxgroups_get "$locus2")
+ ((max == 0))
+ check_err $? "$locus2: Max groups expected to be 0 but $max reported"
+
+ bridge_port_maxgroups_set "$locus0" 0
+ check_err $? "$locus0: Failed to set max to 0"
+
+ max=$(bridge_port_maxgroups_get "$locus0")
+ ((max == 0))
+ check_err $? "$locus0: Max groups expected to be 0, but $max reported"
+
+ max=$(bridge_port_vlan_maxgroups_get "$locus2")
+ ((max == 0))
+ check_err $? "$locus2: Max groups expected to be 0, but $max reported"
+
+ log_test "$CFG: port_vlan maxgroups: isolation of port and per-VLAN maximums"
+}
+
+test_8021qvs_maxgroups_zero_cross_vlan_cfg4()
+{
+ test_maxgroups_zero_cross_vlan cfg4
+}
+
+test_8021qvs_maxgroups_zero_cross_vlan_ctl4()
+{
+ test_maxgroups_zero_cross_vlan ctl4
+}
+
+test_8021qvs_maxgroups_zero_cross_vlan_cfg6()
+{
+ test_maxgroups_zero_cross_vlan cfg6
+}
+
+test_8021qvs_maxgroups_zero_cross_vlan_ctl6()
+{
+ test_maxgroups_zero_cross_vlan ctl6
+}
+
+test_maxgroups_too_low()
+{
+ local CFG=$1; shift
+ local context=$1; shift
+ local locus=$1; shift
+
+ RET=0
+
+ local n=$(bridge_${context}_ngroups_get "$locus")
+ local msg
+
+ ${CFG}_entries_add "$locus" temp 5 111
+ check_err $? "$locus: Couldn't add MDB entries"
+
+ bridge_${context}_maxgroups_set "$locus" $((n+2))
+ check_err $? "$locus: Setting maxgroups to $((n+2)) failed"
+
+ msg=$(${CFG}_entries_add "$locus" temp 2 112 2>&1)
+ check_fail $? "$locus: Adding more entries passed when max<n"
+ bridge_maxgroups_errmsg_check_cfg "$msg"
+
+ ${CFG}_entries_del "$locus" temp 5 111
+ check_err $? "$locus: Couldn't delete MDB entries"
+
+ ${CFG}_entries_add "$locus" temp 2 112
+ check_err $? "$locus: Adding more entries failed"
+
+ ${CFG}_entries_del "$locus" temp 2 112
+ check_err $? "$locus: Deleting more entries failed"
+
+ bridge_${context}_maxgroups_set "$locus" 0
+ check_err $? "$locus: Couldn't set maximum to 0"
+
+ log_test "$CFG: $context maxgroups: configure below ngroups"
+}
+
+test_8021d_maxgroups_too_low_cfg4()
+{
+ test_maxgroups_too_low cfg4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_low_ctl4()
+{
+ test_maxgroups_too_low ctl4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_low_cfg6()
+{
+ test_maxgroups_too_low cfg6 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_low_ctl6()
+{
+ test_maxgroups_too_low ctl6 port "dev $swp1"
+}
+
+test_8021q_maxgroups_too_low_cfg4()
+{
+ test_maxgroups_too_low cfg4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_low_ctl4()
+{
+ test_maxgroups_too_low ctl4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_low_cfg6()
+{
+ test_maxgroups_too_low cfg6 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_low_ctl6()
+{
+ test_maxgroups_too_low ctl6 port "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_low_cfg4()
+{
+ test_maxgroups_too_low cfg4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_low_ctl4()
+{
+ test_maxgroups_too_low ctl4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_low_cfg6()
+{
+ test_maxgroups_too_low cfg6 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_low_ctl6()
+{
+ test_maxgroups_too_low ctl6 port_vlan "dev $swp1 vid 10"
+}
+
+test_maxgroups_too_many_entries()
+{
+ local CFG=$1; shift
+ local context=$1; shift
+ local locus=$1; shift
+
+ RET=0
+
+ local n=$(bridge_${context}_ngroups_get "$locus")
+ local msg
+
+ # Configure a low maximum
+ bridge_${context}_maxgroups_set "$locus" $((n+1))
+ check_err $? "$locus: Couldn't set maximum"
+
+ # Try to add more entries than the configured maximum
+ msg=$(${CFG}_entries_add "$locus" temp 5 2>&1)
+ check_fail $? "Adding 5 MDB entries passed, but should have failed"
+ bridge_maxgroups_errmsg_check_${CFG} "$msg"
+
+ # When adding entries through the control path, as many as possible
+ # get created. That's consistent with the mcast_hash_max behavior.
+ # So there, drop the entries explicitly.
+ if [[ ${CFG%[46]} == ctl ]]; then
+ ${CFG}_entries_del "$locus" temp 17 2>&1
+ fi
+
+ local n2=$(bridge_${context}_ngroups_get "$locus")
+ ((n2 == n))
+ check_err $? "Number of groups was $n, but after a failed attempt to add MDB entries it changed to $n2"
+
+ bridge_${context}_maxgroups_set "$locus" 0
+ check_err $? "$locus: Couldn't set maximum to 0"
+
+ log_test "$CFG: $context maxgroups: add too many MDB entries"
+}
+
+test_8021d_maxgroups_too_many_entries_cfg4()
+{
+ test_maxgroups_too_many_entries cfg4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_many_entries_ctl4()
+{
+ test_maxgroups_too_many_entries ctl4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_many_entries_cfg6()
+{
+ test_maxgroups_too_many_entries cfg6 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_many_entries_ctl6()
+{
+ test_maxgroups_too_many_entries ctl6 port "dev $swp1"
+}
+
+test_8021q_maxgroups_too_many_entries_cfg4()
+{
+ test_maxgroups_too_many_entries cfg4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_many_entries_ctl4()
+{
+ test_maxgroups_too_many_entries ctl4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_many_entries_cfg6()
+{
+ test_maxgroups_too_many_entries cfg6 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_many_entries_ctl6()
+{
+ test_maxgroups_too_many_entries ctl6 port "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_many_entries_cfg4()
+{
+ test_maxgroups_too_many_entries cfg4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_many_entries_ctl4()
+{
+ test_maxgroups_too_many_entries ctl4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_many_entries_cfg6()
+{
+ test_maxgroups_too_many_entries cfg6 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_many_entries_ctl6()
+{
+ test_maxgroups_too_many_entries ctl6 port_vlan "dev $swp1 vid 10"
+}
+
+test_maxgroups_too_many_cross_vlan()
+{
+ local CFG=$1; shift
+
+ RET=0
+
+ local locus0="dev $swp1"
+ local locus1="dev $swp1 vid 10"
+ local locus2="dev $swp1 vid 20"
+ local n1=$(bridge_port_vlan_ngroups_get "$locus1")
+ local n2=$(bridge_port_vlan_ngroups_get "$locus2")
+ local msg
+
+ if ((n1 > n2)); then
+ local tmp=$n1
+ n1=$n2
+ n2=$tmp
+
+ tmp="$locus1"
+ locus1="$locus2"
+ locus2="$tmp"
+ fi
+
+ # Now 0 <= n1 <= n2.
+ ${CFG}_entries_add "$locus2" temp 5 112
+ check_err $? "Couldn't add 5 entries"
+
+ n2=$(bridge_port_vlan_ngroups_get "$locus2")
+ # Now 0 <= n1 < n2-1.
+
+ # Setting locus1'maxgroups to n2-1 should pass. The number is
+ # smaller than both the absolute number of MDB entries, and in
+ # particular than number of locus2's number of entries, but it is
+ # large enough to cover locus1's entries. Thus we check that
+ # individual VLAN's ngroups are independent.
+ bridge_port_vlan_maxgroups_set "$locus1" $((n2-1))
+ check_err $? "Setting ${locus1}'s maxgroups to $((n2-1)) failed"
+
+ msg=$(${CFG}_entries_add "$locus1" temp $n2 111 2>&1)
+ check_fail $? "$locus1: Adding $n2 MDB entries passed, but should have failed"
+ bridge_maxgroups_errmsg_check_${CFG} "$msg"
+
+ bridge_port_maxgroups_set "$locus0" $((n1 + n2 + 2))
+ check_err $? "$locus0: Couldn't set maximum"
+
+ msg=$(${CFG}_entries_add "$locus1" temp 5 111 2>&1)
+ check_fail $? "$locus1: Adding 5 MDB entries passed, but should have failed"
+ bridge_maxgroups_errmsg_check_${CFG} "$msg"
+
+ # IGMP/MLD packets can cause several entries to be added, before
+ # the maximum is hit and the rest is then bounced. Remove what was
+ # committed, if anything.
+ ${CFG}_entries_del "$locus1" temp 5 111 2>/dev/null
+
+ ${CFG}_entries_add "$locus1" temp 2 111
+ check_err $? "$locus1: Adding 2 MDB entries failed, but should have passed"
+
+ ${CFG}_entries_del "$locus1" temp 2 111
+ check_err $? "Couldn't delete MDB entries"
+
+ ${CFG}_entries_del "$locus2" temp 5 112
+ check_err $? "Couldn't delete MDB entries"
+
+ bridge_port_vlan_maxgroups_set "$locus1" 0
+ check_err $? "$locus1: Couldn't set maximum to 0"
+
+ bridge_port_maxgroups_set "$locus0" 0
+ check_err $? "$locus0: Couldn't set maximum to 0"
+
+ log_test "$CFG: port_vlan maxgroups: isolation of port and per-VLAN ngroups"
+}
+
+test_8021qvs_maxgroups_too_many_cross_vlan_cfg4()
+{
+ test_maxgroups_too_many_cross_vlan cfg4
+}
+
+test_8021qvs_maxgroups_too_many_cross_vlan_ctl4()
+{
+ test_maxgroups_too_many_cross_vlan ctl4
+}
+
+test_8021qvs_maxgroups_too_many_cross_vlan_cfg6()
+{
+ test_maxgroups_too_many_cross_vlan cfg6
+}
+
+test_8021qvs_maxgroups_too_many_cross_vlan_ctl6()
+{
+ test_maxgroups_too_many_cross_vlan ctl6
+}
+
+test_vlan_attributes()
+{
+ local locus=$1; shift
+ local expect=$1; shift
+
+ RET=0
+
+ local max=$(bridge_port_vlan_maxgroups_get "$locus")
+ local n=$(bridge_port_vlan_ngroups_get "$locus")
+
+ eval "[[ $max $expect ]]"
+ check_err $? "$locus: maxgroups attribute expected to be $expect, but was $max"
+
+ eval "[[ $n $expect ]]"
+ check_err $? "$locus: ngroups attribute expected to be $expect, but was $n"
+
+ log_test "port_vlan: presence of ngroups and maxgroups attributes"
+}
+
+test_8021q_vlan_attributes()
+{
+ test_vlan_attributes "dev $swp1 vid 10" "== null"
+}
+
+test_8021qvs_vlan_attributes()
+{
+ test_vlan_attributes "dev $swp1 vid 10" "-ge 0"
+}
+
+test_toggle_vlan_snooping()
+{
+ local mode=$1; shift
+
+ RET=0
+
+ local CFG=cfg4
+ local context=port_vlan
+ local locus="dev $swp1 vid 10"
+
+ ${CFG}_entries_add "$locus" $mode 5
+ check_err $? "Couldn't add MDB entries"
+
+ bridge_${context}_maxgroups_set "$locus" 100
+ check_err $? "Failed to set max to 100"
+
+ ip link set dev br0 type bridge mcast_vlan_snooping 0
+ sleep 1
+ ip link set dev br0 type bridge mcast_vlan_snooping 1
+
+ local n=$(bridge_${context}_ngroups_get "$locus")
+ local nn=$(bridge mdb show dev br0 | grep $swp1 | wc -l)
+ ((nn == n))
+ check_err $? "mcast_n_groups expected to be $nn, but $n reported"
+
+ local max=$(bridge_${context}_maxgroups_get "$locus")
+ ((max == 100))
+ check_err $? "Max groups expected to be 100 but $max reported"
+
+ bridge_${context}_maxgroups_set "$locus" 0
+ check_err $? "Failed to set max to 0"
+
+ log_test "$CFG: $context: $mode: mcast_vlan_snooping toggle"
+}
+
+test_toggle_vlan_snooping_temp()
+{
+ test_toggle_vlan_snooping temp
+}
+
+test_toggle_vlan_snooping_permanent()
+{
+ test_toggle_vlan_snooping permanent
+}
+
+# ngroup test suites
+
+test_8021d_ngroups_cfg4()
+{
+ test_8021d_ngroups_reporting_cfg4
+}
+
+test_8021d_ngroups_ctl4()
+{
+ test_8021d_ngroups_reporting_ctl4
+}
+
+test_8021d_ngroups_cfg6()
+{
+ test_8021d_ngroups_reporting_cfg6
+}
+
+test_8021d_ngroups_ctl6()
+{
+ test_8021d_ngroups_reporting_ctl6
+}
+
+test_8021q_ngroups_cfg4()
+{
+ test_8021q_ngroups_reporting_cfg4
+}
+
+test_8021q_ngroups_ctl4()
+{
+ test_8021q_ngroups_reporting_ctl4
+}
+
+test_8021q_ngroups_cfg6()
+{
+ test_8021q_ngroups_reporting_cfg6
+}
+
+test_8021q_ngroups_ctl6()
+{
+ test_8021q_ngroups_reporting_ctl6
+}
+
+test_8021qvs_ngroups_cfg4()
+{
+ test_8021qvs_ngroups_reporting_cfg4
+ test_8021qvs_ngroups_cross_vlan_cfg4
+}
+
+test_8021qvs_ngroups_ctl4()
+{
+ test_8021qvs_ngroups_reporting_ctl4
+ test_8021qvs_ngroups_cross_vlan_ctl4
+}
+
+test_8021qvs_ngroups_cfg6()
+{
+ test_8021qvs_ngroups_reporting_cfg6
+ test_8021qvs_ngroups_cross_vlan_cfg6
+}
+
+test_8021qvs_ngroups_ctl6()
+{
+ test_8021qvs_ngroups_reporting_ctl6
+ test_8021qvs_ngroups_cross_vlan_ctl6
+}
+
+# maxgroups test suites
+
+test_8021d_maxgroups_cfg4()
+{
+ test_8021d_maxgroups_zero_cfg4
+ test_8021d_maxgroups_too_low_cfg4
+ test_8021d_maxgroups_too_many_entries_cfg4
+}
+
+test_8021d_maxgroups_ctl4()
+{
+ test_8021d_maxgroups_zero_ctl4
+ test_8021d_maxgroups_too_low_ctl4
+ test_8021d_maxgroups_too_many_entries_ctl4
+}
+
+test_8021d_maxgroups_cfg6()
+{
+ test_8021d_maxgroups_zero_cfg6
+ test_8021d_maxgroups_too_low_cfg6
+ test_8021d_maxgroups_too_many_entries_cfg6
+}
+
+test_8021d_maxgroups_ctl6()
+{
+ test_8021d_maxgroups_zero_ctl6
+ test_8021d_maxgroups_too_low_ctl6
+ test_8021d_maxgroups_too_many_entries_ctl6
+}
+
+test_8021q_maxgroups_cfg4()
+{
+ test_8021q_maxgroups_zero_cfg4
+ test_8021q_maxgroups_too_low_cfg4
+ test_8021q_maxgroups_too_many_entries_cfg4
+}
+
+test_8021q_maxgroups_ctl4()
+{
+ test_8021q_maxgroups_zero_ctl4
+ test_8021q_maxgroups_too_low_ctl4
+ test_8021q_maxgroups_too_many_entries_ctl4
+}
+
+test_8021q_maxgroups_cfg6()
+{
+ test_8021q_maxgroups_zero_cfg6
+ test_8021q_maxgroups_too_low_cfg6
+ test_8021q_maxgroups_too_many_entries_cfg6
+}
+
+test_8021q_maxgroups_ctl6()
+{
+ test_8021q_maxgroups_zero_ctl6
+ test_8021q_maxgroups_too_low_ctl6
+ test_8021q_maxgroups_too_many_entries_ctl6
+}
+
+test_8021qvs_maxgroups_cfg4()
+{
+ test_8021qvs_maxgroups_zero_cfg4
+ test_8021qvs_maxgroups_zero_cross_vlan_cfg4
+ test_8021qvs_maxgroups_too_low_cfg4
+ test_8021qvs_maxgroups_too_many_entries_cfg4
+ test_8021qvs_maxgroups_too_many_cross_vlan_cfg4
+}
+
+test_8021qvs_maxgroups_ctl4()
+{
+ test_8021qvs_maxgroups_zero_ctl4
+ test_8021qvs_maxgroups_zero_cross_vlan_ctl4
+ test_8021qvs_maxgroups_too_low_ctl4
+ test_8021qvs_maxgroups_too_many_entries_ctl4
+ test_8021qvs_maxgroups_too_many_cross_vlan_ctl4
+}
+
+test_8021qvs_maxgroups_cfg6()
+{
+ test_8021qvs_maxgroups_zero_cfg6
+ test_8021qvs_maxgroups_zero_cross_vlan_cfg6
+ test_8021qvs_maxgroups_too_low_cfg6
+ test_8021qvs_maxgroups_too_many_entries_cfg6
+ test_8021qvs_maxgroups_too_many_cross_vlan_cfg6
+}
+
+test_8021qvs_maxgroups_ctl6()
+{
+ test_8021qvs_maxgroups_zero_ctl6
+ test_8021qvs_maxgroups_zero_cross_vlan_ctl6
+ test_8021qvs_maxgroups_too_low_ctl6
+ test_8021qvs_maxgroups_too_many_entries_ctl6
+ test_8021qvs_maxgroups_too_many_cross_vlan_ctl6
+}
+
+# other test suites
+
+test_8021qvs_toggle_vlan_snooping()
+{
+ test_toggle_vlan_snooping_temp
+ test_toggle_vlan_snooping_permanent
+}
+
+# test groups
+
+test_8021d()
+{
+ # Tests for vlan_filtering 0 mcast_vlan_snooping 0.
+
+ switch_create_8021d
+ setup_wait
+
+ test_8021d_ngroups_cfg4
+ test_8021d_ngroups_ctl4
+ test_8021d_ngroups_cfg6
+ test_8021d_ngroups_ctl6
+ test_8021d_maxgroups_cfg4
+ test_8021d_maxgroups_ctl4
+ test_8021d_maxgroups_cfg6
+ test_8021d_maxgroups_ctl6
+
+ switch_destroy
+}
+
+test_8021q()
+{
+ # Tests for vlan_filtering 1 mcast_vlan_snooping 0.
+
+ switch_create_8021q
+ setup_wait
+
+ test_8021q_vlan_attributes
+ test_8021q_ngroups_cfg4
+ test_8021q_ngroups_ctl4
+ test_8021q_ngroups_cfg6
+ test_8021q_ngroups_ctl6
+ test_8021q_maxgroups_cfg4
+ test_8021q_maxgroups_ctl4
+ test_8021q_maxgroups_cfg6
+ test_8021q_maxgroups_ctl6
+
+ switch_destroy
+}
+
+test_8021qvs()
+{
+ # Tests for vlan_filtering 1 mcast_vlan_snooping 1.
+
+ switch_create_8021qvs
+ setup_wait
+
+ test_8021qvs_vlan_attributes
+ test_8021qvs_ngroups_cfg4
+ test_8021qvs_ngroups_ctl4
+ test_8021qvs_ngroups_cfg6
+ test_8021qvs_ngroups_ctl6
+ test_8021qvs_maxgroups_cfg4
+ test_8021qvs_maxgroups_ctl4
+ test_8021qvs_maxgroups_cfg6
+ test_8021qvs_maxgroups_ctl6
+ test_8021qvs_toggle_vlan_snooping
+
+ switch_destroy
+}
+
+trap cleanup EXIT
+
+setup_prepare
+tests_run
+
+exit $EXIT_STATUS
--
2.39.0
