Re: [PATCH v4 net-next 3/6] drivers: net: dsa: add locked fdb entry flag to drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-07-24 13:10, Ido Schimmel wrote:

In the mv88e6xxx offload implementation, the locked entries eventually
age out from time to time, practically giving the true owner of the MAC
address another chance every 5 minutes or so. In the pure software
implementation of locked FDB entries I'm not quite sure. It wouldn't
make much sense for the behavior to differ significantly though.

From what I can tell, the same happens in software, but this behavior
does not really make sense to me. It differs from how other learned
entries age/roam and can lead to problems such as the one described
above. It is also not documented anywhere, so I can't tell if it's
intentional or an oversight. We need to have a good reason for such a
behavior other than the fact that it appears to conform to the quirks of
one hardware implementation.


> It seems like the main purpose of these locked entries is to signal to
> user space the presence of a certain MAC behind a locked port, but they
> should not be able to affect packet forwarding in the bridge, unlike
> regular entries.

So essentially what you want is for br_handle_frame_finish() to treat
"dst = br_fdb_find_rcu(br, eth_hdr(skb)->h_dest, vid);" as NULL if
test_bit(BR_FDB_LOCKED, &dst->flags) is true?

Yes. It's not clear to me why unauthorized hosts should be given the
ability to affect packet forwarding in the bridge through these locked
entries when their primary purpose seems to be notifying user space
about the presence of the MAC. At the very least this should be
explained in the commit message, to indicate that some thought went into
this decision.


I guess you are right that the SW setup locked entries can be used to gain uni-directional traffic through a switch, which should really not be the case. In this case I expect the zero-DPV entries to not give this ability, which is the correct behaviour with MAB IMHO.


> Regarding a separate knob for MAB, I tend to agree we need it. Otherwise
> we cannot control which locked ports are able to populate the FDB with
> locked entries. I don't particularly like the fact that we overload an
> existing flag ("learning") for that. Any reason not to add an explicit
> flag ("mab")? At least with the current implementation, locked entries
> cannot roam between locked ports and cannot be refreshed, which differs
> from regular learning.

Well, assuming we model the software bridge closer to mv88e6xxx (where
locked FDB entries can roam after a certain time), does this change things?
In the software implementation I think it would make sense for them to
be able to roam right away (the age-out interval in mv88e6xxx is just a
compromise between responsiveness to roaming and resistance to DoS).

Exactly. If this is the best that we can do with mv88e6xxx, then so be
it, but other implementations (software/hardware) do not have the same
limitations and I don't see a reason to bend them.

Regarding "learning" vs. "mab" (or something else), the former is a
well-defined flag available since forever. In 5.18 and 5.19 it can also
be enabled together with "locked" and packets from an unauthorized host
(modulo link-local ones) will not populate the FDB. I prefer not to
change an existing behavior.

From usability point of view, I think a new flag would be easier to
explain than explaining that "learning on" behaves like A or B, based on
whether "locked on" is set. The bridge can also be taught to forbid the
new flag from being set when "locked" is not set.

A user space daemon that wants to try 802.1x and fallback to MAB can
enable both flags or enable "mab" after some timer expires.

With this driver it is not really an option to use +learning for a opt-in for MAB. I think locked port should always have -learning before locking the port. In fact there is a problem in this implementation with MAB if -learning is applied after locking the port, as that will disable MAB, but also refresh and all other violation interrupts. So I guess I need to disable the learning flag to the driver when the port is locked, or even from the bridge?



[Index of Archives]     [Netdev]     [AoE Tools]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]     [Video 4 Linux]

  Powered by Linux