On Thu, Mar 10, 2022 at 11:46:45PM +0100, Tobias Waldekranz wrote:
> On Thu, Mar 10, 2022 at 18:18, Vladimir Oltean <olteanv@xxxxxxxxx> wrote:
> > On Thu, Mar 10, 2022 at 05:05:35PM +0100, Tobias Waldekranz wrote:
> >> On Thu, Mar 10, 2022 at 12:35, Vladimir Oltean <olteanv@xxxxxxxxx> wrote:
> >> > On Thu, Mar 10, 2022 at 09:54:34AM +0100, Tobias Waldekranz wrote:
> >> >> >> + if (!dsa_port_can_configure_learning(dp) || dp->learning) {
> >> >> >> + switch (state->state) {
> >> >> >> + case BR_STATE_DISABLED:
> >> >> >> + case BR_STATE_BLOCKING:
> >> >> >> + case BR_STATE_LISTENING:
> >> >> >> + /* Ideally we would only fast age entries
> >> >> >> + * belonging to VLANs controlled by this
> >> >> >> + * MST.
> >> >> >> + */
> >> >> >> + dsa_port_fast_age(dp);
> >> >> >
> >> >> > Does mv88e6xxx support this? If it does, you might just as well
> >> >> > introduce another variant of ds->ops->port_fast_age() for an msti.
> >> >>
> >> >> You can limit ATU operations to a particular FID. So the way I see it we
> >> >> could either have:
> >> >>
> >> >> int (*port_vlan_fast_age)(struct dsa_switch *ds, int port, u16 vid)
> >> >>
> >> >> + Maybe more generic. You could imagine there being a way to trigger
> >> >> this operation from userspace for example.
> >> >> - We would have to keep the VLAN<->MSTI mapping in the DSA layer in
> >> >> order to be able to do the fan-out in dsa_port_set_mst_state.
> >> >>
> >> >> or:
> >> >>
> >> >> int (*port_msti_fast_age)(struct dsa_switch *ds, int port, u16 msti)
> >> >>
> >> >> + Let's the mapping be an internal affair in the driver.
> >> >> - Perhaps, less generically useful.
> >> >>
> >> >> Which one do you prefer? Or is there a hidden third option? :)
> >> >
> >> > Yes, I was thinking of "port_msti_fast_age". I don't see a cheap way of
> >> > keeping VLAN to MSTI associations in the DSA layer. Only if we could
> >> > retrieve this mapping from the bridge layer - maybe with something
> >> > analogous to br_vlan_get_info(), but br_mst_get_info(), and this gets
> >> > passed a VLAN_N_VID sized bitmap, which the bridge populates with ones
> >> > and zeroes.
> >>
> >> That can easily be done. Given that, should we go for port_vlan_fast_age
> >> instead? port_msti_fast_age feels like an awkward interface, since I
> >> don't think there is any hardware out there that can actually perform
> >> that operation without internally fanning it out over all affected VIDs
> >> (or FIDs in the case of mv88e6xxx).
> >
> > Yup, yup. My previous email was all over the place with regard to the
> > available options, because I wrote it in multiple phases so it wasn't
> > chronologically ordered top-to-bottom. But port_vlan_fast_age() makes
> > the most sense if you can implement br_mst_get_info(). Same goes for
> > dsa_port_notify_bridge_fdb_flush().
> >
> >> > The reason why I asked for this is because I'm not sure of the
> >> > implications of flushing the entire FDB of the port for a single MSTP
> >> > state change. It would trigger temporary useless flooding in other MSTIs
> >> > at the very least. There isn't any backwards compatibility concern to
> >> > speak of, so we can at least try from the beginning to limit the
> >> > flushing to the required VLANs.
> >>
> >> Aside from the performance implications of flows being temporarily
> >> flooded I don't think there are any.
> >>
> >> I suppose if you've disabled flooding of unknown unicast on that port,
> >> you would loose the flow until you see some return traffic (or when one
> >> side gives up and ARPs). While somewhat esoteric, it would be nice to
> >> handle this case if the hardware supports it.
> >
> > If by "handle this case" you mean "flush only the affected VLANs", then
> > yes, I fully agree.
> >
> >> > What I didn't think about, and will be a problem, is
> >> > dsa_port_notify_bridge_fdb_flush() - we don't know the vid to flush.
> >> > The easy way out here would be to export dsa_port_notify_bridge_fdb_flush(),
> >> > add a "vid" argument to it, and let drivers call it. Thoughts?
> >>
> >> To me, this seems to be another argument in favor of
> >> port_vlan_fast_age. That way you would know the VIDs being flushed at
> >> the DSA layer, and driver writers needn't concern themselves with having
> >> to remember to generate the proper notifications back to the bridge.
> >
> > See above.
> >
> >> > Alternatively, if you think that cross-flushing FDBs of multiple MSTIs
> >> > isn't a real problem, I suppose we could keep the "port_fast_age" method.
> >>
> >> What about falling back to it if the driver doesn't support per-VLAN
> >> flushing? Flushing all entries will work in most cases, at the cost of
> >> some temporary flooding. Seems more useful than refusing the offload
> >> completely.
> >
> > So here's what I don't understand. Do you expect a driver other than
> > mv88e6xxx to do something remotely reasonable under a bridge with MSTP
> > enabled? The idea being to handle gracefully the case where a port is
> > BLOCKING in an MSTI but FORWARDING in another. Because if not, let's
> > just outright not offload that kind of bridge, and only concern
> > ourselves with what MST-capable drivers can do.
>
> I think you're right. I was trying to make it easier for other driver
> writers, but it will just be more confusing and error prone.
>
> Alright, so v3 will have something like this:
>
> bool dsa_port_can_offload_mst(struct dsa_port *dp)
> {
> return ds->ops->vlan_msti_set &&
> ds->ops->port_mst_state_set &&
> ds->ops->port_vlan_fast_age &&
> dsa_port_can_configure_learning(dp);
> }
>
> If this returns false, we have two options:
>
> 1. Return -EOPNOTSUPP, which the bridge will be unable to discriminate
> from a non-switchdev port saying "I have no idea what you're talking
> about". I.e. the bridge will happily apply the config, but the
> hardware won't match. I don't like this, but it lines up with most
> other stuff.
>
> 2. Return a hard error, e.g. -EINVAL/-ENOSYS. This will keep the bridge
> in sync with the hardware and also gives some feedback to the
> user. This seems like the better approach to me, but it is a new kind
> of paradigm.
>
> What do you think?
Wait, what? It matters a lot where you place the call to
dsa_port_can_offload_mst(), too. You don't have to propagate a hard
error code, either, at least if you make dsa_port_bridge_join() return
-EOPNOTSUPP prior to calling switchdev_bridge_port_offload(), no?
DSA transforms this error code into 0, and dsa_port_offloads_bridge*()
starts returning false, which makes us ignore all MSTP related switchdev
notifiers.
The important part will be to make sure that MSTP is enabled for this
bridge from the get-go (that being the only case in which we can offload
an MSTP aware bridge), and refusing to offload dynamic changes to its
MSTP state. I didn't re-check now, but I think I remember there being
limitations even in the software bridge related to dynamic MSTP mode
changes anyway - there had to not be any port VLANs, which IIUC means
that you actually need to _delete_ the port PVIDs which are automatically
created before you could change the MSTP mode.
This is the model, what's wrong with it? I said "don't offload the
bridge", not "don't offload specific MSTP operations".
> > I'm shadowing you with a prototype (and untested so far) MSTP
> > implementation for the ocelot/felix drivers, and those switches can
> > flush the MAC table per VLAN too. So I don't see an immediate need to
> > have a fallback implementation if you'll also provide it for mv88e6xxx.
> > Let's treat that only if the need arises.
>
> Cool. Agreed, v3 will implement .port_vlan_fast_age for mv88e6xxx.
