On Mon, Jul 19, 2021 at 12:44:19AM +0300, Vladimir Oltean wrote: > drivers/net/dsa/mv88e6xxx/chip.c | 78 +++- > .../ethernet/freescale/dpaa2/dpaa2-switch.c | 69 +++- > .../ethernet/marvell/prestera/prestera_main.c | 99 +++-- > .../marvell/prestera/prestera_switchdev.c | 42 ++- > .../marvell/prestera/prestera_switchdev.h | 7 +- > .../net/ethernet/mellanox/mlxsw/spectrum.c | 347 ++++++++++++------ > .../net/ethernet/mellanox/mlxsw/spectrum.h | 4 + > .../mellanox/mlxsw/spectrum_switchdev.c | 28 +- > .../microchip/sparx5/sparx5_switchdev.c | 48 ++- > drivers/net/ethernet/mscc/ocelot_net.c | 115 ++++-- > drivers/net/ethernet/rocker/rocker.h | 9 +- > drivers/net/ethernet/rocker/rocker_main.c | 34 +- > drivers/net/ethernet/rocker/rocker_ofdpa.c | 42 ++- > drivers/net/ethernet/ti/am65-cpsw-nuss.c | 34 +- > drivers/net/ethernet/ti/am65-cpsw-switchdev.c | 14 +- > drivers/net/ethernet/ti/am65-cpsw-switchdev.h | 3 + > drivers/net/ethernet/ti/cpsw_new.c | 32 +- > drivers/net/ethernet/ti/cpsw_switchdev.c | 4 +- > drivers/net/ethernet/ti/cpsw_switchdev.h | 3 + > include/linux/if_bridge.h | 63 ++-- > include/net/dsa.h | 21 ++ > net/bridge/br_fdb.c | 1 - > net/bridge/br_forward.c | 9 + > net/bridge/br_if.c | 11 +- > net/bridge/br_mdb.c | 1 - > net/bridge/br_private.h | 84 ++++- > net/bridge/br_switchdev.c | 287 +++++++++++++-- > net/bridge/br_vlan.c | 11 +- > net/dsa/dsa2.c | 4 + > net/dsa/dsa_priv.h | 6 + > net/dsa/port.c | 192 +++++++--- > net/dsa/tag_dsa.c | 52 ++- > 32 files changed, 1406 insertions(+), 348 deletions(-) Too many things are squashed into this one patchset. It needs to be split. According to the title, the patchset is focused on improving performance, but there are no performance numbers that I could see and most of the patches deal with the replay stuff instead. The TX forwarding offload in mv88e6xxx is not related to the replay stuff and should be added in a separate patchset. This can be done by first adding the switchdev_bridge_port_offload() / switchdev_bridge_port_unoffload() APIs that only take care of setting / unsetting the hardware domain for the bridge port. Then, in a different patchset, these APIs can be augmented with a parameter for the replay stuff. It should be easier to review that way and require less unnecessary surgeries in drivers that do not require the added functionality. Thanks
