Enable HW_BRIDGE feature for ocelot. In this way the HW will do all the switching of the frames so it is not needed for the ports to be in promisc mode. Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx> --- drivers/net/ethernet/mscc/ocelot.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 4d1bce4..c9cf2bee 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -2017,8 +2017,10 @@ int ocelot_probe_port(struct ocelot *ocelot, u8 port, dev->ethtool_ops = &ocelot_ethtool_ops; dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_RXFCS | - NETIF_F_HW_TC; - dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_TC; + NETIF_F_HW_TC | NETIF_F_HW_BRIDGE; + dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_TC | + NETIF_F_HW_BRIDGE; + dev->priv_flags |= IFF_UNICAST_FLT; memcpy(dev->dev_addr, ocelot->base_mac, ETH_ALEN); dev->dev_addr[ETH_ALEN - 1] += port; -- 2.7.4
