Hi,
I'm having some problem to make traffic shaping work with bridge, the topology is below, the same script to set the delay/loss works for 10.34.201.45 and 10.35.201.47, but not working
for 10.35.200.2.
I use ifb device for traffic control, say for example, adding 300ms delay for dst 10.35.200.2, and I use tcpdump to capture ifb1, and no packets. And if I set the dst to 10.35.201.47 or 10.35.201.45, it works.
I tried to read the code, the "sch_handle_ingress" is before "rx_handle", and I can capture packets on enp2s0, but can't figure out why the filter is not working, 10.35.200.2 is in different subnet with 10.35.201.45, but the bridge works b/c it just use MAC address, even it's not the typical scenario to put them in different subnet.
Thanks in advance!
+ tc qdisc add dev enp2s0 ingress
+ tc filter add dev enp2s0 parent ffff: protocol ip prio 1 u32 match ip dst 10.35.200.2 flowid 1:1 action mirred egress redirect dev ifb1
+ tc qdisc add dev ifb1 root netem loss random 0% delay 300ms
+-------------+ 10.35.200.2
| jianfu-sx10 +------------------+
+-------------+ |
|
+-------------+ 10.35.201.45 +--------+ +----------+ 10.35.201.10 +-------+
| marcel-sx80 +---------------| switch |-----| emulator |--------------+ Linus |
+-------------+ +--------+ +----------+ | +-------+
| enp3s0 enp2s0 |
+-------------+ 10.35.201.47 | |
| jianfu-win +------------------+ |
+-------------+ |
|
+-------------+ 10.22.79.106 |
| anand-sx10 +------------------------------------+-----------+
+-------------+ |
|
+-------------+ 10.22.79.170 |
| jianfu-ttc7 +------------------------------------+
+-------------+