On Tue, 27 Feb 2018 11:08:20 +0100 Rafał Miłecki <zajec5@xxxxxxxxx> wrote: > I've problem when using OpenWrt/LEDE on a home router with Broadcom's > FullMAC WiFi chipset. > > > First of all OpenWrt/LEDE uses bridge interface for LAN network with: > 1) IFLA_BRPORT_MCAST_TO_UCAST > 2) Clients isolation in hostapd > 3) Hairpin mode enabled > > For more details please see Linus's patch description: > https://patchwork.kernel.org/patch/9530669/ > and maybe hairpin mode patch: > https://lwn.net/Articles/347344/ > > Short version: in that setup packets received from a bridged wireless > interface can be handled back to it for transmission. > > > Now, Broadcom's firmware for their FullMAC chipsets in AP mode > supports an obsoleted 802.11f AKA IAPP standard. It's a roaming > standard that was replaced by 802.11r. > > Whenever a new station associates, firmware generates a packet like: > ff ff ff ff ff ff ec 10 7b 5f ?? ?? 00 06 00 01 af 81 01 00 > (just masked 2 bytes of my MAC) > > For mode details you can see discussion in my brcmfmac patch thread: > https://patchwork.kernel.org/patch/10191451/ > > > The problem is that bridge (in setup as above) handles such a packet > back to the device. > > That makes Broadcom's FullMAC firmware believe that a given station > just connected to another AP in a network (which doesn't even exist). > As a result firmware immediately disassociates that station. It's > simply impossible to connect to the router. Every association is > followed by immediate disassociation. > > > Can you see any solution for this problem? Is that an option to stop > multicast-to-unicast from touching 802.11f packets? Some other ideas? > Obviously I can't modify Broadcom's firmware and drop that obsoleted > standard. > ebtables is your friend in dealing with weird and broken devices.
