Hi all, This patch series allows using the bridge master interface to configure an Ethernet switch port's CPU/management port with different VLAN attributes than those of the bridge downstream ports/members. Jiri, Ido, Andrew, Vivien, please review the impact on mlxsw and mv88e6xxx, I tested this with b53 and a mockup DSA driver. Open questions: - if we have more than one bridge on top of a physical switch, the driver should keep track of that and verify that we are not going to change the CPU port VLAN attributes in a way that results in incompatible settings to be applied - if the default behavior is to have all VLANs associated with the CPU port be ingressing/egressing tagged to the CPU, is this really useful? Florian Fainelli (3): net: bridge: Allow bridge master device to configure switch CPU port net: dsa: Propagate VLAN add/del to CPU port(s) net: dsa: b53: Remove CPU port specific VLAN programming drivers/net/dsa/b53/b53_common.c | 22 ++++++-------------- net/bridge/br_vlan.c | 28 ++++++++++++++++++++++--- net/dsa/slave.c | 45 +++++++++++++++++++++++++++++----------- 3 files changed, 64 insertions(+), 31 deletions(-) -- 2.9.3
