Re: [PATCH net-next] bridge: vlan: allow to suppress local mac install for all vlans

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/24/2015 08:55 PM, Nikolay Aleksandrov wrote:
> From: Nikolay Aleksandrov <nikolay@xxxxxxxxxxxxxxxxxxx>
> 
> This patch adds a new knob that, when enabled, allows to suppress the
> installation of local fdb entries in newly created vlans. This could
> pose a big scalability issue if we have a large number of ports and a
> large number of vlans, e.g. in a 48 port device with 2000 vlans these
> entries easily go up to 96000.
> Note that packets for these macs are still received properly because they
> are added in vlan 0 as "own" macs and referenced when fdb lookup by vlan
> results in a miss.
> Also note that vlan membership of ingress port and the bridge device
> as egress are still being correctly enforced.
> 
> The default (0/off) is keeping the current behaviour.
> 
> Based on a patch by Wilson Kok (wkok@xxxxxxxxxxxxxxxxxxx).
> 
> Signed-off-by: Nikolay Aleksandrov <nikolay@xxxxxxxxxxxxxxxxxxx>
> ---
> As usual I'll post iproute2 patch if this one gets accepted.
> 

... snip...

> diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c
> index 3cef6892c0bb..f9efa1b07994 100644
> --- a/net/bridge/br_vlan.c
> +++ b/net/bridge/br_vlan.c
> @@ -98,11 +98,12 @@ static int __vlan_add(struct net_port_vlans *v, u16 vid, u16 flags)
>  			return err;
>  	}
>  
> -	err = br_fdb_insert(br, p, dev->dev_addr, vid);
> -	if (err) {
> -		br_err(br, "failed insert local address into bridge "
> -		       "forwarding table\n");
> -		goto out_filt;
> +	if (!br_vlan_ignore_local_fdb(br) || !v->port_idx) {
> +		err = br_fdb_insert(br, p, dev->dev_addr, vid);
> +		if (err) {
> +			br_err(br, "failed insert local address into bridge forwarding table\n");
> +			goto out_filt;
> +		}
>  	}
>

One question.  Does it make sense to push this down into br_fdb_insert?
This patch prevents automatic entries from being added.  But what about
manual entries for a local fdb?  The code in br_fdb_add() will still a
vid 0 entry as well as entries for all vlans currently configured on the port.

-vlad

>  	set_bit(vid, v->vlan_bitmap);
> @@ -492,6 +493,13 @@ int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val)
>  	return 0;
>  }
>  
> +int br_vlan_ignore_local_fdb_toggle(struct net_bridge *br, unsigned long val)
> +{
> +	br->vlan_ignore_local_fdb = val ? true : false;
> +
> +	return 0;
> +}
> +
>  int br_vlan_set_proto(struct net_bridge *br, unsigned long val)
>  {
>  	int err = 0;
> 




[Index of Archives]     [Netdev]     [AoE Tools]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]     [Video 4 Linux]

  Powered by Linux