[RFC net] bridge: clean the nf_bridge status when forwarding the skb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Antonio Quartulli <antonio@xxxxxxxxxxxxx>

Even if enslaving a bridge interface into another bridge is
forbidden, it is still possible to create a chain of
virtual interfaces including two distinct bridges.

In this case, the skb entering the second bridge could have
the nf_bridge field already set due to a previous operation
and consequently lead to a wrong processing of the packet
itself.

To prevent this behaviour release and set to NULL the
nf_bridge field of the skb when exiting the bridge interface.

Signed-off-by: Antonio Quartulli <antonio@xxxxxxxxxxxxx>
---

I am not sure if this is a wanted behaviour or a real BUG. I found this
"misbehaviour" while testing batman-adv with the following configuration:

- br0 (bridge interface) having bat0 and eth0 as slaves
- bat0 (which is a virtual interface provided by the batman-adv module and that
  works similarly to a bridge - to some extends) having br1 as slave
- br1 (second bridge interface) having eth1 as slave

Then follow these events:
- a broadcast packet arrives on eth0
- the skb enters br0 and skb->nf_bridge gets initialised and used
- the skb enters bat0 and the packet *gets encapsulated in the batman-adv packet
  which adds a batman-adv header and another Ethernet header*
- the skb enters br1 and gets ruined because nf_bridge_maybe_copy_header() (in
  br_dev_queue_push_xmit()) will try to restore an header that does not make
  sense anymore.

With this patch the nf_bridge gets de-initialised before exiting br0 and
therefore it is processed properly inside br1: nf_bridge_maybe_copy_header()
does not take place at all because nf_bridge is never initialised (the packet is
non-IP since it is a batman-adv packet)

To the developers of the bridge module I would like to ask:
1) is skb->nf_bridge allowed to be non NULL when entering br_dev_xmit() ? If so,
   when is this supposed to happen?

2) do you think this patch is logically correct but the nf_bridge release should
   be done in batman-adv since it is the one re-encapsulating the packet?


I hope I have made the problem clear.

Best regards,


 net/bridge/br_forward.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index 4b81b14..65864bc 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -49,6 +49,11 @@ int br_dev_queue_push_xmit(struct sk_buff *skb)
 	} else {
 		skb_push(skb, ETH_HLEN);
 		br_drop_fake_rtable(skb);
+
+		/* clean the NF bridge data */
+		nf_bridge_put(skb->nf_bridge);
+		skb->nf_bridge = NULL;
+
 		dev_queue_xmit(skb);
 	}
 
-- 
1.8.1.5





[Index of Archives]     [Netdev]     [AoE Tools]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]     [Video 4 Linux]

  Powered by Linux