On Tue, Mar 12, 2013 at 09:45:22PM -0400, Vlad Yasevich wrote: > The series adds an ability for the bridge to function in non-promiscuous mode. > We do it in 3 steps. > First we add an interface to palce the switch into non-promisc mode. In > this mode, all port of the switch turn promisc off and turn on IFF_ALLMULTI > to continue handling multicast traffic. Hmm why not go the extra mile and do same thing for multicast? > Second we add an ability to designate a bridge port as uplink. > Third we add IFF_UNICAST_FLT support to the bridge and sync all unicast > HW addresses to the uplink ports. > Default bridge operation continues to remain "promiscuous". The new > functionality has to be enabled via sysfs (similar to other bridge extensions). > > The uplink mode is implemented as a flag on a bridge port. The api to > change that flag follows the existing api to enable/disable other existing > flags. Actually, it seems a bit tricky to use correctly. Specifying MACs is straight-forward enough, but as you add and remove interfaces, you would need to play with uplink and promisc bits. I also think that for setups you describe, where we really want to forward traffic to VMs and that's all, promisc mode is an implementation detail. If true it's a mistake to expose it in an interface. Here's an idea how we could make it work automatically: - Like your patch does, allow two kinds of ports: port that only wants specific addresses and "wildcard" port that can get all addresses All ports default to wildcard as a compatible way - For port A, if there is some wildcard port besides A, A must be promiscous since maybe it needs to get packets that will be later forwardd to A - For port A, if there are no wildcard ports, or if A is the only wildcard, A does not need to be promiscous. Instead we can program it with addresses of all other ports. Exactly same logic applies, separately, for unicast, where promisc means all uni, and multicast, where promisc means all multi. Now there's no special unplink port, no need to enable/disable special mode, nothing: just program addresses for ports and go. > Changes since rfc v2: > * Sync/unsync address on uplink upon the uplink flag change. This allows > for uplink replacements without loss of addresses. > > Changes since rfc v1: > * Fixed submit log > * Simplifyied uplink logic. Uplink is now a flag per port. This removes the > need for a separate list. > * Clean-up hw list once the port has been removed. > > Vlad Yasevich (4): > bridge: Add sysfs interface to control promisc mode > bridge: Allow an ability to designate an uplink port > bridge: Implement IFF_UNICAST_FLT > bridge: sync device list when a new uplink is designated > > include/uapi/linux/if_link.h | 1 + > net/bridge/br_device.c | 52 +++++++++++++++++++++++++++++++++++++++++- > net/bridge/br_fdb.c | 6 +++++ > net/bridge/br_if.c | 24 +++++++++++++++---- > net/bridge/br_netlink.c | 13 ++++++++++ > net/bridge/br_private.h | 3 ++ > net/bridge/br_sysfs_br.c | 17 +++++++++++++ > net/bridge/br_sysfs_if.c | 27 +++++++++++++++++++++ > 8 files changed, 137 insertions(+), 6 deletions(-) > > -- > 1.7.7.6 > > -- > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html
