Hi, I have configured a bridge between ethernet and WLAN interfaces. This is the only bridge in my system. When we are transmitting udp traffic from ethernet machine to wlan machine, bridge is pumping enough packets but when we are doing TCP it is not pumping more data and hence we are getting less throughputs. Here is the bridge script we are using presently. brctl addbr bri0 ifconfig bri0 192.168.200.127 netmask 255.255.255.0 ifconfig bri0 up brctl setfd bri0 1 brctl stp bri0 off brctl addif bri0 eth0 ; /sbin/ifconfig eth0 up 0.0.0.0 ; brctl addif bri0 vap0 ;#/sbin/ifconfig vap0 up 0.0.0.0 ; Do I need to set any other options like setbridgeprio etc??. But I think this is useful if we have more than one bridge. Thanks, Prameela _______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
