Bridge suddenly only passes traffic if in promiscuous mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

I have a bridge to various interfaces. There is an IP address on the 
bridge, and hosts on the interfaces connected to the bridge use the 
bridge's IP address as a gateway. STP is off and the forwarding delay is 
set to 0.

This has been working fine, however, today I needed to change around 
some IPv6 addresses on the connected hosts. I made the IPv6 changes and 
rebooted those boxes, only to find that suddenly no traffic -- IPv4 *or* 
IPv6 -- was passing through the bridge.

When I pulled up tshark to see what was going on, traffic suddenly 
started flowing again. And even as I type this, as long as tshark is 
running on that interface (no matter what the capture filter is), 
traffic is flowing. The moment I stop tshark from running, traffic 
stops. IOW, the bridge is only passing traffic while in promiscuous mode.

I didn't change the IP address on the bridge itself. As far as I can 
tell I didn't do anything odd whatsoever. But I have no idea what's 
causing this and I'd really like to not reboot the box if at all possible.

Does anyone have any idea what might be causing this and/or how to 
troubleshoot this?

Thanks,
Jeff
_______________________________________________
Bridge mailing list
Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/bridge


[Index of Archives]     [Netdev]     [AoE Tools]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]     [Video 4 Linux]

  Powered by Linux